I changed out one the two FC switches. It appears my paths have all come back up except for this one "dac0" which appears as "missing" and I'm not having any luck getting rid of that... All of the disks came back fine, just dac0 is missing. This output is from my lpar, not the underlying VIO server. Any ideas?
Hi , Migrating AIX 4.3.3 ML10 to 5.3 ML1 (retaining 32 bit)
after successfully going through 5 of the 5.3 Install CD's. After "All fileset's processed successfully " message I was told that system would reboot and then I would get prompted for setting TERm type ( i have an ascii ibm3151) and... (1 Reply)
Hi, I'm going to be involved in a migration of SAN islands to one big SAN. I've not worked with SANs before and I'm not sure how to approach this. I suspect the disk devices on the HP servers are going to change, when the EVA's and servers are plugged into this new Cisco 9509 switch.
Any... (0 Replies)
Hello All,
We want to upgrade our 44p Model 270 from AIX 5.2 to 5.3. This is a standalone devlopment server but downtime is something we don't want because we have a short development deadline looming. I have no tape drive to make backups to. I myself am a developer and don't have any... (4 Replies)
Hi,
redbook documentation is telling that IY17981 fix is required for aix 4.3.3 to aix 5L migration. But there is no mention about that fix in any ML installation packages.
- My system is ML11 :
oslevel –r
4330-11
- But xlC.rte is on wrong version :
lslpp -L xlC.rte
xlC.rte ... (3 Replies)
Hello gurus,
I am a SAN Admin - not very familiar with the HPUX administration - so need help with the steps in regards to the migration I need to do at my client place.
Environment: Migrating from CX4 to VMAX - using OR/Hot Pull.
Here are the steps I have put together - HPUX gurus please... (5 Replies)
I am going to do a SAN Array migration and need the sequence of steps required on the Solaris cluster before moving the old array luns to new array luns.
Here are the steps and I need info on the bold points:( I might even be wrong on the sequence of steps please correct me if I am wrong)
1.... (0 Replies)
Hi all,
We are migrating our SAN storage from HSV360 to 3PAR. The system runs aix 6.1 version with HACMP.
Please let me know what are requirements from OS side and how are the data copied to the new disks. (10 Replies)
Hi,
I am very new to HP-UX, and we're going to be doing a SAN migration.
We're going to take down the machine, and zone it to the new SAN.
My question is, will the device names change and will that interfere with the LVM?
If the new disks come in with different device names, how would I... (3 Replies)
I have an IBM blade running RHEL 5.4 server, connected to two Hitachi SANs using common fibre cards & Brocade switches. It has two volume groups made from old SAN LUNs. The old SAN needs to be retired so we allocated LUNs from the new SAN, discovered the LUNs as multipath disks (4 paths) and grew... (4 Replies)
I am working on VM host and collecting data to identify the type of storage attached to the server which will be migrated to VNX.
it has one ldom created on it
luxadm probe output ---
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node... (7 Replies)
Discussion started by: kpatel786
7 Replies
LEARN ABOUT DEBIAN
catalystx::simplelogin::controller::login
CatalystX::SimpleLogin::Controller::Login(3pm) User Contributed Perl Documentation CatalystX::SimpleLogin::Controller::Login(3pm)NAME
CatalystX::SimpleLogin::Controller::Login - Configurable login controller
SYNOPSIS
# For simple useage exmple, see CatalystX::SimpleLogin, this is a
# full config example
__PACKAGE__->config(
'Controller::Login' => {
traits => [
'WithRedirect', # Optional, enables redirect-back feature
'-RenderAsTTTemplate', # Optional, allows you to use your own template
],
actions => {
login => { # Also optional
PathPart => ['theloginpage'], # Change login action to /theloginpage
},
},
},
);
See CatalystX::SimpleLogin::Form::Login for configuring the form.
DESCRIPTION
Controller base class which exists to have login roles composed onto it for the login and logout actions.
ATTRIBUTES
login_form_class
A class attribute containing the class of the form to be initialised. One can override it in a derived class with the class of a new form,
possibly subclassing CatalystX::SimpleLogin::Form::Login. For example:
package MyApp::Controller::Login;
use Moose;
extends('CatalystX::SimpleLogin::Controller::Login');
has '+login_form_class' => (
default => "MyApp::Form::Login",
);
1;
login_form_class_roles
An attribute containing an array reference of roles to be consumed by the form. One can override it in a similar way to "login_form_class":
package MyApp::Controller::Login;
use Moose;
extends('CatalystX::SimpleLogin::Controller::Login');
has '+login_form_class_roles' => (
default => sub { [qw(MyApp::FormRole::Foo MyApp::FormRole::Bar)] },
);
1;
METHODS
BUILD
Cause form instance to be built at application startup.
do_post_login_redirect
This method does a post-login redirect. TODO for BOBTFISH - should it even be public? If it does need to be public, then document it
because the Pod coverage test failed.
login
Login action.
login_redirect
Redirect to the login action.
login_GET
Displays the login form
login_POST
Processes a submitted login form, and if correct, logs the user in and redirects
not_required
A stub action that is anchored at the root of the site ("/") and does not require registration (hence the name).
redirect_after_login_uri
If you are using WithRedirect (i.e. by default), then this methd is overridden to redirect the user back to the page they intially hit
which required authentication.
Note that even if the original URI was a post, then the redirect back will only be a GET.
If you choose NOT to compose the WithRedirect trait, then you can set the uri users are redirected to with the "redirect_after_login_uri"
config key, or by overriding the redirect_after_login_uri method in your own login controller if you need custom logic.
render_login_form
Renders the login form. By default it just calls the form's render method. If you want to do something different, like rendering the form
with a template through your view, this is the place to hook into.
required
A stub action that is anchored at the root of the site ("/") and does require registration (hence the name).
SEE ALSO
CatalystX::SimpleLogin::TraitFor::Controller::Login::WithRedirect
CatalystX::SimpleLogin::Form::Login
AUTHORS
See CatalystX::SimpleLogin for authors.
LICENSE
See CatalystX::SimpleLogin for license.
perl v5.14.2 2012-07-15 CatalystX::SimpleLogin::Controller::Login(3pm)