Hard Drives Undetected on My Machine - But Mounts on All Other Machines Post: 302952397

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Hard drives

Will some one tell me what this means. "warning: ida 0 <slot 6> : command timed out on dev 1/42 blk 4824290 logical unit=0 blocks=5512102, size 2, cmd=0x20." I'm running SCO 505 on a proliant 1600r. Thnank you in advance.

2. Linux

No Hard Drives Have Been Found

I am using an Acer Aspire 4720Z with two partitions C and D. Windows is installed on C and I decided to install Red Hat Linux 9 in partition D. The two partitions are in NTFS file system. During my installation of the the Linux, a prompt was displayed on screen with the message: "No hard drives...

3. Solaris

How do I determine the hard drives in /dev/dsk in OpenSolaris?

I have a Solaris machine running OpenSolaris v5.11. It came with a hard drive. It's called /dev/dsk/c4d0s0. I added two new hard drives into the box. I can't figure out what it's called in /dev/dsk. There are 210 filenames in /dev/dsk. How do I find out which filename corresponds to the...

4. Solaris

formating and repartitioning an external hard drives

Version: solaris 10 x86 I just got a western digital external harddrive formated with fat 32. this drive came with some setup files which is meant for windows or mac. I want to reformat and partition this drive into two ( for solaris and windows) such that the setup files will still be there...

5. Filesystems, Disks and Memory

Help adding new hard drives

Folks; I just added 2 physical new hard drives to my SUSE server. My server is already running SUSE 10.3 version. Is there a command i can use to add the new space or even see if the system can sees them?

6. Solaris

Reinstall old hard drives

I have a T2000 Sun-Fire server. I have 2 sets of drives in a raid 1. Lets call them Set A and Set B. I had Set A installed and working. I needed a new install so I so build up Set B. After some time I wanted to put Set A back in the server. Now the system will not boot off of Set A. I tried to boot...

7. Hardware

Hard Drives and MBR

Hello everyone. I have a question which I may know the answer to, I'm just looking for a confirmation. When it comes to the MBR of a hard drive, i've read in multiple sources that it's always located in the first sector of the hard drive. Is the MBR there from the factory? When I buy a new blank...

8. Solaris

Trying to boot Solaris without hard drives in T5220

I have three Sun Oracle Netra T5220s. I am trying to just get the processor information psrinfo or prtdiag -v from the # prompt in single user mode. I am needing to know the commands to get to boot the CD/DVD of the Solaris OS. I am using it via Serial Port Management. Tinkering around I...

9. Solaris

Solaris 8 - Accessing Hard Drives

Hi, I have two SCSI Hard Drives in a Sun Solaris 8 server as shown below. I would like to access Disk1 and look at its contents, directory structure and files. How do I change my default directory from Disk 0 to Disk 1 and vice versa? Thank you.

10. UNIX for Beginners Questions & Answers

Understanding volumes and hard drives

Ok so i thought i was smart but i can tell I need some help. I am playing around with understanding lvm and adding disks to a linux box. I added a disk and then ran what i thought were commands to add this disk to the box but I think I messed up and would like some help. My question is did i...

LEARN ABOUT CENTOS

grub2-bios-setup

GRUB-BIOS-SETUP(3)					     Library Functions Manual						GRUB-BIOS-SETUP(3)

NAME

       grub-bios-setup -- Set up images to boot from a device.

SYNOPSIS

       grub-bios-setup [-a | --allow-floppy] [-b | --boot-image=FILE]
			[-c | --core-image=FILE] [-d | --directory=DIR]
			[-f | --force] [-m | --device-map=FILE]
			[-s | --skip-fs-probe] [-v | --verbose] DEVICE

DESCRIPTION

       You should not normally run this program directly.  Use grub-install instead.

OPTIONS

       --allow-floppy
	      Make  the device also bootable as a floppy.  This option is the default for /dev/fdX devices.  Some BIOSes will not boot images cre-
	      ated with this option.

       --boot-image=FILE
	      Use FILE as the boot image.  The default value is boot.img.

       --core-image=FILE
	      Use FILE as ther core image.  The default value is core.img.

       --directory=DIR
	      Use GRUB files in the directory DIR.  The default value is /boot/grub.

       --force
	      Install even if problems are detected.

       --device-map=FILE
	      Use FILE as the device map.  The default value is /boot/grub/device.map .

       --skip-fs-probe
	      Do not probe DEVICE for filesystems.

       --verbose
	      Print verbose messages.

SEE ALSO

       info grub

								  Wed Feb 26 2014						GRUB-BIOS-SETUP(3)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Hard drives

Discussion started by: franruiz

2. Linux

No Hard Drives Have Been Found

Discussion started by: tamcomng

3. Solaris

How do I determine the hard drives in /dev/dsk in OpenSolaris?

Discussion started by: sqa777

4. Solaris

formating and repartitioning an external hard drives

Discussion started by: seyiisq