Hi, I'm going to be involved in a migration of SAN islands to one big SAN. I've not worked with SANs before and I'm not sure how to approach this. I suspect the disk devices on the HP servers are going to change, when the EVA's and servers are plugged into this new Cisco 9509 switch.
Any... (0 Replies)
Hello,
I have logical volume group of 50GB, in which I have 2 logical volumes, LogVol01 and LogVol02, both are of 10GB.
If I extend LogVol01 further by 10GB, then it keeps the extended copy after logical volume 2. I want to know where it keeps this information
Regards
Himanshu (3 Replies)
Does anyone have any simple methods for moving a current logical volume from one volume group to another? I do not wish to move the data from one physical volume to another. Basically, I want to "relink" the logical volume to exist in a different volume group. Any ideas? (2 Replies)
Hello,
I am a french computer technician, and i speak English just a little.
On Aix 5.3, I encounter a name conflict logical volume on two volume group.
The first volume lvnode01 is OK in rootvg and mounted. It is also consistent in the ODM
root # lsvg -l rootvg |grep lvnode01 ... (10 Replies)
Hi,
I have a 2 node Cluster. Which is working in active/passive mode (i.e Node#1 is running and when it goes down the Node#2 takes over)
Now there's this requirement that we need a mount point say /test that should be available in active node #1 and when node #1 goes down and node#2 takes... (6 Replies)
Hi,
I am new to unix. I am working on Red Hat Linux and side by side on AIX also. After reading the concepts of Storage, I am now really confused regarding the terminologies
1)Physical Volume
2)Volume Group
3)Logical Volume
4)Physical Partition
Please help me to understand these concepts. (6 Replies)
hi,
I want to create a volume group of 200 GB and then create different file systems on that.
please help me out. Its becomes confusing when the PP calculating PP.
I don't understand this concept. (2 Replies)
Hi all,
We are migrating our SAN storage from HSV360 to 3PAR. The system runs aix 6.1 version with HACMP.
Please let me know what are requirements from OS side and how are the data copied to the new disks. (10 Replies)
I'm New to AIX / VIOS
We're doing a FC switch cutover on an ibm device, connected via SAN.
How do I tell if one path to my remote disk is lost? (aix lvm)
How do I tell when my link is down on my HBA port?
Appreciate your help, very much! (4 Replies)
Hello Guys,
I want to create a file system dedicated for an application installation. But there is no space in volume group to create a new logical volume. There is enough space in other logical volume which is being mounted on /var.
I know we can use that logical volume and create a virtual... (2 Replies)
Discussion started by: vamshigvk475
2 Replies
LEARN ABOUT LINUX
multipath
MULTIPATH(8) Linux Administrator's Manual MULTIPATH(8)NAME
multipath - Device mapper target autoconfig
SYNOPSIS
multipath [-v verbosity] [-d] [-h|-l|-ll|-f|-t|-F-B] [-p failover|multibus|group_by_serial|group_by_prio|group_by_node_name] [device]
DESCRIPTION
multipath is used to detect multiple paths to devices for fail-over or performance reasons and coalesces them
OPTIONS -v level
verbosity, print all paths and multipaths
0 no output
1 print the created or updated multipath names only, for use to feed other tools like kpartx
2 + print all info : detected paths, coalesced paths (ie multipaths) and device maps
-h print usage text
-d dry run, do not create or update devmaps
-l show the current multipath topology from information fetched in sysfs and the device mapper
-ll show the current multipath topology from all available information (sysfs, the device mapper, path checkers ...)
-f flush a multipath device map specified as parameter, if unused
-F flush all unused multipath device maps
-t print internal hardware table to stdout
-r force devmap reload
-B treat the bindings file as read only
-p policy
force new maps to use the specified policy:
failover 1 path per priority group
multibus all paths in 1 priority group
group_by_serial
1 priority group per serial
group_by_prio
1 priority group per priority value. Priorities are determined by callout programs specified as a global, per-con-
troller or per-multipath option in the configuration file
group_by_node_name
1 priority group per target node name. Target node names are fetched in /sys/class/fc_transport/target*/node_name.
Existing maps are not modified.
device update only the devmap the path pointed by device is in. device is in the /dev/sdb (as shown by udev in the $DEVNAME variable) or
major:minor format. device may alternatively be a multipath mapname
SEE ALSO multipathd(8), multipath.conf(5), kpartx(8), udev(8), dmsetup(8)hotplug(8)AUTHORS
multipath was developed by Christophe Varoqui, <christophe.varoqui@opensvc.com> and others.
July 2006 MULTIPATH(8)