I have a log file that ends in a ".xxx" where xxx are digits but I don't necessarily know what digits they are. The log file rotates automatically and is auto-incrementing - starting at .001.
So the example would be:
file-name.005
If the file ends in .005 and the log rotates, it logically... (2 Replies)
Hi guys,
I am not very experienced in writing ksh scripts and I am trying to write a piece of code that indicates if a given string contains only digits and no alphabet (upper or lower case). If i write it my way it would turn out to have a lot of comparisons.. :eek:
Thanks a lot in... (3 Replies)
Hi Friends
I have 2 solaris boxes and I need to check certain directories (on local filesystem and mounted nfs) to make sure that they match up on both boxes and to delete or move the other mismatches to elsewhere on the local filesystem.
I investigated for unix commands like rsync, and tree... (1 Reply)
hi all, im having problems. I need to change all number 10 in a text file to word form, or in short from 10->ten. the thing is number 10 including in dates such as 10/22/1997 or 03-10-2011 should not be changed. im having some trouble because the file contains numbers like "price range from... (11 Replies)
Hi,
I just need to check whether number of digits in a phone number is 10 or not. If I am not wrong regex will be: {9}
I have to use this inside nawk as this is a small portion of a big program.
nawk '
BEGIN { RS="";FS=";";
regex="{9}";
}
{
for (i=1;i<=NF;i++) {
if... (6 Replies)
Hi,
I have a text file with an array of numbers such as :
123 1 456 45 9817 1 45
I would like to replace the digit "1" in a text file with "A". So it looks like this:
123 A 456 45 9817 A 45
If I use sed 's/1/A/g', I get
A23 A 456 45 98A7 A 45
I... (3 Replies)
Hi All
I am new to this forum and also regex.
I am using bash scripting and have a file like this
"0012","efgh","12345678","adfdf", "36598745"
"87654321","hijk","lmno"
I want the ouput to be
12345678
36598745
87654321
Criteria like this
- number
- 8 carachters long
Please let... (21 Replies)
I'm trying to grep lines where the digits at the end of each line are greater than digits. Tried this but it will only allow me to specify 2 digits. Any ideas would greatly be appreciated. grep -i '\<\{3,4,5\}\>' file
---------- Post updated at 05:58 PM ---------- Previous update was at 05:41... (1 Reply)
Hi Experts,
I am finding difficulty to get exact match:
file
OPERATING_SYSTEM=HP-UX
LOOPBACK_ADDRESS=127.0.0.1
INTERFACE_NAME="lan3"
IP_ADDRESS="10.53.52.241"
SUBNET_MASK="255.255.255.192"
BROADCAST_ADDRESS=""
INTERFACE_STATE=""
DHCP_ENABLE=0
INTERFACE_NAME="lan3:1"... (6 Replies)
Discussion started by: rveri
6 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)