Volume group not activated at boot after SAN migration Post: 302952166

10 More Discussions You Might Find Interesting

1. HP-UX

SAN migration

Hi, I'm going to be involved in a migration of SAN islands to one big SAN. I've not worked with SANs before and I'm not sure how to approach this. I suspect the disk devices on the HP servers are going to change, when the EVA's and servers are plugged into this new Cisco 9509 switch. Any...

2. UNIX for Advanced & Expert Users

LVM - Extending Logical Volume within Volume Group

Hello, I have logical volume group of 50GB, in which I have 2 logical volumes, LogVol01 and LogVol02, both are of 10GB. If I extend LogVol01 further by 10GB, then it keeps the extended copy after logical volume 2. I want to know where it keeps this information Regards Himanshu

3. AIX

Moving a Logical Volume from one Volume Group to Another

Does anyone have any simple methods for moving a current logical volume from one volume group to another? I do not wish to move the data from one physical volume to another. Basically, I want to "relink" the logical volume to exist in a different volume group. Any ideas?

4. AIX

Logical volume name conflict in two volume group

Hello, I am a french computer technician, and i speak English just a little. On Aix 5.3, I encounter a name conflict logical volume on two volume group. The first volume lvnode01 is OK in rootvg and mounted. It is also consistent in the ODM root # lsvg -l rootvg |grep lvnode01 ...

5. AIX

Adding a Volume Group to an HACMP Resource Group?

Hi, I have a 2 node Cluster. Which is working in active/passive mode (i.e Node#1 is running and when it goes down the Node#2 takes over) Now there's this requirement that we need a mount point say /test that should be available in active node #1 and when node #1 goes down and node#2 takes...

6. UNIX for Dummies Questions & Answers

Confusion Regarding Physical Volume,Volume Group,Logical Volume,Physical partition

Hi, I am new to unix. I am working on Red Hat Linux and side by side on AIX also. After reading the concepts of Storage, I am now really confused regarding the terminologies 1)Physical Volume 2)Volume Group 3)Logical Volume 4)Physical Partition Please help me to understand these concepts.

7. UNIX for Dummies Questions & Answers

How to create a volume group, logical volume group and file system?

hi, I want to create a volume group of 200 GB and then create different file systems on that. please help me out. Its becomes confusing when the PP calculating PP. I don't understand this concept.

8. AIX

SAN Migration

Hi all, We are migrating our SAN storage from HSV360 to 3PAR. The system runs aix 6.1 version with HACMP. Please let me know what are requirements from OS side and how are the data copied to the new disks.

9. AIX

AIX - FC Switch migration, SAN Migration question!

I'm New to AIX / VIOS We're doing a FC switch cutover on an ibm device, connected via SAN. How do I tell if one path to my remote disk is lost? (aix lvm) How do I tell when my link is down on my HBA port? Appreciate your help, very much!

10. Red Hat

No space in volume group. How to create a file system using existing logical volume

Hello Guys, I want to create a file system dedicated for an application installation. But there is no space in volume group to create a new logical volume. There is enough space in other logical volume which is being mounted on /var. I know we can use that logical volume and create a virtual...

LEARN ABOUT REDHAT

iscsi.conf

ISCSI.CONF(5)							File Formats Manual						     ISCSI.CONF(5)

NAME

       iscsi.conf - iSCSI Target and LUN configuration

SYNOPSIS

       /etc/iscsi.conf

DESCRIPTION

       This manual page describes the format of the /etc/iscsi.conf file. This file is a simple text file that iscsid(8) uses to locate iSCSI tar-
       get devices and LUNs.  Comments are marked by lines beginning with '#'.

       Available entries include:

       DiscoveryAddress=<address>
	      IP address or hostname to use for target discovery.  A TCP port number may be specified by appending a colon followed  by  the  port
	      number. This entry must start in the first column, and must not contain any whitespace.

       TargetIpAddr=<address>
	      A synonym for DiscoveryAddress.

       Username=<user>
	      Specify  the  authentication user.  If this entry precedes all DiscoveryAddress entries, it serves as the default.  If this entry is
	      indented under a DiscoveryAddress entry, it specifies the user for all targets discovered at that IP address.

       Password=<pass>
	      Specify the authentication password for the previously listed iSCSI If this entry precedes all DiscoveryAddress entries,	it  serves
	      as  the default.	If this entry is indented under a DiscoveryAddress entry, it specifies the user for all targets discovered at that
	      IP address.

EXAMPLE

       # set the default user and password
       Username=alice
       Password=nty57nbe

       # targets at this address will use the default Username and Password
       DiscoveryAddress=192.168.10.94

       # targets at this address will use the Username and Password below
       DiscoveryAddress=192.168.10.95
	   Username=beatrice
	   Password=93fdgc20

NOTES

       The iSCSI initiator drivers, README files, and example configuration files are available on the Linux-iSCSI homepage at:

       http://linux-iscsi.sourceforge.com <http://linux-iscsi.sourceforge.com>

FILES

       /etc/iscsi.conf
	      iSCSI Target and LUN configuration

SEE ALSO

       iscsid(8)

$Revision: 1.9 $					   $Date: 2002/09/19 20:00:32 $ 					     ISCSI.CONF(5)

10 More Discussions You Might Find Interesting

1. HP-UX

SAN migration

Discussion started by: Hils

2. UNIX for Advanced & Expert Users

LVM - Extending Logical Volume within Volume Group

Discussion started by: ghimanshu

3. AIX

Moving a Logical Volume from one Volume Group to Another

Discussion started by: krisw

4. AIX

Logical volume name conflict in two volume group

Discussion started by: dantares