I have just installed 5.0.7 of openserver and forgot to create a /u filesystem.
I have a root filesystem that takes up most of the hard disc space and I want to reduce the size of that and create a /u.
I have tried divvy amd mkdev fs but to no avail.
Could somebody give me some idea as to how I... (2 Replies)
Hello, this is my first post.
I have a user who cannot create a file over 2 GB's in size eventhough the FS is large file enabled and I added a special stanza in /etc/security/limits to allow an unlimited file size for this particular user (user1 - see below).
ibm:/home/root (4062)#cat... (7 Replies)
Hi All:
I am using an adaptor between a 1TB SATA hard drive and solaris 8 box with 68 pin scsi. I use the format utility to partition the HD which works fine but when I use newfs, I get some errors. I will place them below.
I have blocked and the error message is in red.
Anybody got any... (1 Reply)
Hi,
Has anyone ever encountered the following scenario:
I am working on a SUN server with solaris 10 installed and veritas managing the filesystem. One of the file systems has become full:
df -kh /ossrc/dbdumps
Filesystem size used avail capacity Mounted on... (6 Replies)
Hi,
I am unable to create/open any file in vi editor for normal user, though using root I am able to create/open any file, using redhat 5.5,
example
vi test
it showing nothing after entering command (9 Replies)
Hi,
The solaris filesystem /u01 shows available space as 100GB, and used space as 6 GB.
The Problem is when iam trying to install some software or copy some files in this file system /u01 Iam unable to copy or install in this file system due to lack of space.
ofcourse the software... (31 Replies)
Hi,
I am trying to tar a directory structure. but unable to do due to a symbolic link. Please help
indomt@behpux $ tar -cvf test.tar /home/indomt
a /home/indomt symbolic link to /dxdv/03/ap1dm1
Thanks (1 Reply)
Hi
I have the following difficulty:
the NetApp admin has clone one file system from one red hatserver and presented this cloned LUN into another redhat server.
I can see the LUN as:
fdisk -l
Disk /dev/sda: 64.4 GB, 64424509440 bytes
255 heads, 63 sectors/track, 7832 cylinders
Units =... (1 Reply)
Hi,
I have inherited this AIX 5.3 host. I'm unable to increase the /usr file system. It gives me this error.
What needs to be done to remove this error?
vios:/home/padmin$ chfs -a size=+128M /usr
0516-304 lquerypv: Unable to find device id 0002ef4df616f9690000000000000000 in the Device
... (14 Replies)
Discussion started by: dn888
14 Replies
LEARN ABOUT HPUX
vxdmp
vxdmp(7) Miscellaneous Information Manual vxdmp(7)NAME
vxdmp - Veritas Volume Manager multipathing disk devices
DESCRIPTION
Multipathed disk devices in Veritas Volume Manager (VxVM) represent virtual devices with one or more physical access paths to a physical
disk. The Multipathing feature provides disk access reliability by dynamically switching to another physical path if there is a path fail-
ure.
Every disk that is visible to VxVM is represented by a multipath device node in the /dev/vx/dmp and /dev/vx/rdmp directories for block type
and character type interfaces. A simple disk is represented by a multipath device having one physical path, whereas a disk that is part of
a multiported disk array is represented by a multipath device with many device access paths depending upon the type of the disk array.
VxVM uses standard disk device naming conventions to name multipath devices. For example, if there is a disk device with two physical
access paths such as c1t0d0 and c2t0d0, the multipathing device node for this particular disk is created under /dev/vx/dmp and /dev/vx/rdmp
as c1t0d0 or c2t0d0.
To provide multipathing, VxVM maintains an internal database of all the multipathed devices detected by the system and their respective
paths. The database is created at system boot time. When disks are added or removed from the system, VxVM provides support to reconfigure
the multipath device database to reflect new states of the hardware, while the system is online.
To reconfigure the DMP database, run ioscan followed by insf, and then invoke vxdctl enable (see vxdctl(1M)).
The various access paths to a multipathed device can be seen by using a vxdisk command (see vxdisk(1M)). These commands open the multi-
pathing configuration device /dev/vx/dmpconfig to obtain the required information about the various paths to a multipathed device and their
states.
VxVM also provides the facility to enable or disable a disk controller. This feature can be used to stop all I/Os through a particular con-
troller to perform maintenance operations on it. Use the vxdmpadm command to do this and also perform other operations on the multipath
device database.
VxVM can provide notification about events that occur in the DMP database due to a change in hardware. See the vxnotify(1M) man page for
more information.
VxVM is capable of multipathing both Active/Active and Active/Passive disk arrays.
FILES
/dev/vx/dmp Multipathing block devices.
/dev/vx/rdmp Multipathing character devices.
SEE ALSO ioctl(2), vxdctl(1M), vxdisk(1M), vxdmpadm(1M), vxnotify(1M)VxVM 5.0.31.1 24 Mar 2008 vxdmp(7)