The unquoted glob-expression is evaluated by the shell, so you can as well do ls -1 (or ls if not seeing an interactive terminal) puts output line by line, that is sometimes convenient. Like the following that pipes the output to grep
grep uses Regular Expression: . is a single character, ^ is line start, $ is line end.
This User Gave Thanks to MadeInGermany For This Post:
Sir,
I using the following commands in a file (part of a bigger script):
#!/bin/bash
cd /opt/oracle/bin
ls -lt | tail -1 | awk '{print $6}' >> /tmp/ramb.out
If I run this from the command prompt the result is:
2007-05-16
if I run it as a cron job then... (5 Replies)
Hi ,
I have a piece of code ...wherein I need to assign the following ...
1) A command line argument to a variable
e.g origCount=ARGV
2) A unix command to a variable
e.g result=`wc -l testFile.txt`
in my awk shell script
When I do this :
print "origCount" origCount --> I get the... (0 Replies)
AIX:Command to get netaddress/subnet address command in IPv4/IP6
Can anybody help us with a command to retrieve netaddress/subnet address command in IPv4/IP6 on aix machine.
net/subnet address is in the format 172.16.212.0(signifies all 255 machines in an IPv4 network) (2 Replies)
Hi everyone,
when executing this command in unix:
echo "WM7 Fatal Alerts:", $(cat query1.txt) > a.csvIt works fine, but running this command in a shell script gives an error saying that there's a syntax error.
here is content of my script:
tdbsrvr$ vi hc.sh
"hc.sh" 22 lines, 509... (4 Replies)
Hi,
Well my title isn't very clear I think. So to understand my goal:
I have a script "test1"
#!/bin/bash
xvkbd -text blabla
with xbindkeys, I bind F5 key in order it runs my test1 script
So when I press F5, test1 runs.
I'm under Emacs/Vi and I press F5 in order to have "blabla" be... (0 Replies)
HI Guys,
I hope you are well. I am trying to write a script that gets executed every time i open a shell (cshell). I have two questions about that
1) I need to enter these commands
$ echo $DISPLAY
$ setenv $DISPLAY output_of_echo_$display_command
How can i write a... (2 Replies)
I am working with a sh script on a solaris 9 zone (sol 10 host) that grabs information to build the configuration command line. the variables Build64, SSLopt, CONFIGopt, and CC are populated in the script. the script includes
CC=`which gcc`
CONFIGopt=' --prefix=/ --exec-prefix=/usr... (8 Replies)
below is the output xml string from some other command and i will be parsing it using awk
cat /tmp/alerts.xml
<Alert id="10102" name="APP-DS-ds_ha-140018-componentFailure-S" alertDefinitionId="13982" resourceId="11427" ctime="1359453507621" fixed="false" reason="If Event/Log Level(ANY) and... (2 Replies)
exec(): 0509-036 Cannot load program /usr/opt/freeware/bin/rpm because of the following errors:
0509-022 Cannot load module /opt/freeware/lib/libintl.a(libintl.so.1).
0509-150 Dependent module /opt/freeware/lib/libiconv.a(shr4.o) could not be loaded.
0509-152 Member... (4 Replies)
Hello Forum,
I'm making very good progress on my report thanks to the very helpful people on this forum. I've been able to successfully create my report for my Red Hat servers. But I do have a few ubuntu servers in the mix and I'd like to capture some data from them when an ssh connection is... (8 Replies)
Discussion started by: greavette
8 Replies
LEARN ABOUT CENTOS
datadm
datadm(1M)datadm(1M)NAME
datadm - maintain DAT static registry file
SYNOPSIS
/usr/bin/datadm [-v] [-u] [-a service_provider.conf] [-r service_provider.conf]
The datadm utility maintains the DAT static registry file, dat.conf(4).
This administrative configuration program allows uDAPL service providers to add and remove themselves to the dat.conf file.
You can add or remove interface adapters that a service provider supports from a system after its installation. You can use datadm to
update the dat.conf file to reflect the current state of the system. A new set of interface adapters for all the service providers cur-
rently installed is regenerated.
The following options are supported:
-a service_provider.conf
Enumerate each device entry in the service_provider.conf(4) file into a list of interface adapters, that is, interfaces to external
network that are available to uDAPL consumers.
-r service_provider.conf
Remove the list of interface adapters that corresponds to the device entry in the service_provider.conf(4) file.
-u
Update the dat.conf to reflect the current state of the system with an up to date set of interface adapters for the service providers
that are currently listed in the DAT static registry.
-v
Display the DAT static registry file, dat.conf.
Example 1: Enumerating a Device Entry
The following example enumerates a device entry in the service_provider.conf(4) file into interface adapters in the dat.conf(4) file.
Assume that SUNW has a service provider library that supports the device tavor. It has a service_provider.conf(4) file installed in the
directory /usr/share/dat/SUNWudaplt.conf with a single entry as follows:
driver_name=tavor u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
tavor is an Infiniband Host Channel Adapter with two ports. Both IB ports exist in a single IB partition, 0x8001. If an IP interface is
plumbed to each port, there are two IPoIB device instances, ibd0 and ibd1:
# ls -l /dev/ibd*
/dev/ibd0 -> /devices/pci@1/pci15b3,5a44@0/ibport@1,8001,ipib:ibd0
/dev/ibd1 -> /devices/pci@1/pci15b3,5a44@0/ibport@2,8001,ipib:ibd1
Running the command, datadm -a /usr/share/dat/SUNWudaplt.conf appends two new entries (if they do not already exists]) in the
/etc/dat/dat.conffile:
ibd0 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"
ibd1 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"
Example 2: Updating the dat.conf to Reflect the Current State of the System
A new IB partition, 0x8002 is added to the above example covering port 1 of the Host Channel Adapter. If a new IP interface is plumbed to
port 1/partition 0x8002, there is a third IPoIB device instance: ibd2.
# ls -l /dev/ibd*
/dev/ibd0 -> /devices/pci@1/pci15b3,5a44@0/ibport@1,8001,ipib:ibd0
/dev/ibd1 -> /devices/pci@1/pci15b3,5a44@0/ibport@2,8001,ipib:ibd1
/dev/ibd2 -> /devices/pci@1/pci15b3,5a44@0/ibport@1,8002,ipib:ibd2
Running datadm -u command, updates the /etc/dat/dat.conf file with a new entry added reflecting the current state of the system.
datadm -v shows that there are now three entries in the /etc/dat/dat.conf file:
ibd0 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"
ibd1 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"
ibd2 u1.2 nonthreadsafe default udapl_tavor.so.1 SUNW.1.0 ""
"driver_name=tavor"
/etc/dat/dat.conf DAT static registry file
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWudaplu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkgadd(1M), pkgrm(1M), libdat(3LIB), dat.conf(4), service_provider.conf(4). attributes(5)
18 Jun 2004 datadm(1M)