---------- Post updated at 11:41 ---------- Previous update was at 11:40 ----------
Howsoever, try
Code:
awk '
{(gsub(/ +/," "))}
!T[toupper($0)]++
' file
GRANT select on MANHPRD.S_PROD_INT TO OR_PHIL;
GRANT select on SCOTT.emp to JOHN;
grant select on scott.dept to hr;
I have following file content (3 fields each line):
23 888 10.0.0.1
dfh 787 10.0.0.2
dssf dgfas 10.0.0.3
dsgas dg 10.0.0.4
df dasa 10.0.0.5
df dag 10.0.0.5
dfd dfdas 10.0.0.5
dfd dfd 10.0.0.6
daf nfd 10.0.0.6
...
as can be seen, that the third field is ip address and sorted. but... (3 Replies)
I have a log file "logreport" that contains several lines as seen below:
04:20:00 /usr/lib/snmp/snmpdx: Agent snmpd appeared dead but responded to ping
06:38:08 /usr/lib/snmp/snmpdx: Agent snmpd appeared dead but responded to ping
07:11:05 /usr/lib/snmp/snmpdx: Agent snmpd appeared dead but... (18 Replies)
I have a data set that has 4 columns, I want to know if I can delete duplicate lines while ignoring one of the columns, for example
10 chr1 ASF 30
15 chr1 ASF 20
5 chr1 ASF 30
6 chr2 EBC 15
4 chr2 EBC 30
...
I want to know if I can delete duplicate lines while ignoring column 1, so the... (5 Replies)
Hi
I want to make string substitution ignoring case for search but respecting case for subtitute. Ex changing all occurences of "original" in a file to "substitute":
original becomes substitute
Origninal becomes Substitute
ORIGINAL becomes SUBSTITUTE
I know this a little special but it's not... (1 Reply)
Hi, I have a huge file which is about 50GB. There are many lines. The file format likes
21 rs885550 0 9887804 C C T C C C C C C C
21 rs210498 0 9928860 0 0 C C 0 0 0 0 0 0
21 rs303304 0 9941889 A A A A A A A A A A
22 rs303304 0 9941890 0 A A A A A A A A A
The question is that there are a few... (4 Replies)
I have this structure:
col1 col2 col3 col4 col5
27 xxx 38 aaa ttt
2 xxx 38 aaa yyy
1 xxx 38 aaa yyy
I need to collapse duplicate lines ignoring column 1 and add values of duplicate lines (col1) so it will look like this:
col1 col2 col3 col4 col5
27 xxx 38 aaa ttt ... (3 Replies)
Within my text file i have several thousand lines of text with some lines containing duplicate strings/words. I would like to entirely remove those lines which contain the duplicate strings.
Eg;
One and a Two
Unix.com is the Best
This as a Line Line
Example duplicate sentence with the word... (22 Replies)
Hi All,
I am storing the result in the variable result_text using the below code.
result_text=$(printf "$result_text\t\n$name") The result_text is having the below text. Which is having duplicate lines.
file and time for the interval 03:30 - 03:45
file and time for the interval 03:30 - 03:45 ... (4 Replies)
Discussion started by: nalu
4 Replies
LEARN ABOUT OPENDARWIN
od
OD(1) User Commands OD(1)NAME
od - dump files in octal and other formats
SYNOPSIS
od [OPTION]... [FILE]...
od [-abcdfilosx]... [FILE] [[+]OFFSET[.][b]]
od --traditional [OPTION]... [FILE] [[+]OFFSET[.][b] [+][LABEL][.][b]]
DESCRIPTION
Write an unambiguous representation, octal bytes by default, of FILE to standard output. With more than one FILE argument, concatenate
them in the listed order to form the input.
With no FILE, or when FILE is -, read standard input.
If first and second call formats both apply, the second format is assumed if the last operand begins with + or (if there are 2 operands) a
digit. An OFFSET operand means -j OFFSET. LABEL is the pseudo-address at first byte printed, incremented when dump is progressing. For
OFFSET and LABEL, a 0x or 0X prefix indicates hexadecimal; suffixes may be . for octal and b for multiply by 512.
Mandatory arguments to long options are mandatory for short options too.
-A, --address-radix=RADIX
output format for file offsets; RADIX is one of [doxn], for Decimal, Octal, Hex or None
--endian={big|little}
swap input bytes according the specified order
-j, --skip-bytes=BYTES
skip BYTES input bytes first
-N, --read-bytes=BYTES
limit dump to BYTES input bytes
-S BYTES, --strings[=BYTES]
output strings of at least BYTES graphic chars; 3 is implied when BYTES is not specified
-t, --format=TYPE
select output format or formats
-v, --output-duplicates
do not use * to mark line suppression
-w[BYTES], --width[=BYTES]
output BYTES bytes per output line; 32 is implied when BYTES is not specified
--traditional
accept arguments in third form above
--help display this help and exit
--version
output version information and exit
Traditional format specifications may be intermixed; they accumulate:
-a same as -t a, select named characters, ignoring high-order bit
-b same as -t o1, select octal bytes
-c same as -t c, select printable characters or backslash escapes
-d same as -t u2, select unsigned decimal 2-byte units
-f same as -t fF, select floats
-i same as -t dI, select decimal ints
-l same as -t dL, select decimal longs
-o same as -t o2, select octal 2-byte units
-s same as -t d2, select decimal 2-byte units
-x same as -t x2, select hexadecimal 2-byte units
TYPE is made up of one or more of these specifications:
a named character, ignoring high-order bit
c printable character or backslash escape
d[SIZE]
signed decimal, SIZE bytes per integer
f[SIZE]
floating point, SIZE bytes per float
o[SIZE]
octal, SIZE bytes per integer
u[SIZE]
unsigned decimal, SIZE bytes per integer
x[SIZE]
hexadecimal, SIZE bytes per integer
SIZE is a number. For TYPE in [doux], SIZE may also be C for sizeof(char), S for sizeof(short), I for sizeof(int) or L for sizeof(long).
If TYPE is f, SIZE may also be F for sizeof(float), D for sizeof(double) or L for sizeof(long double).
Adding a z suffix to any type displays printable characters at the end of each output line.
BYTES is hex with 0x or 0X prefix, and may have a multiplier suffix:
b 512
KB 1000
K 1024
MB 1000*1000
M 1024*1024
and so on for G, T, P, E, Z, Y.
EXAMPLES
od -A x -t x1z -v
Display hexdump format output
od -A o -t oS -w16
The default output format used by od
AUTHOR
Written by Jim Meyering.
REPORTING BUGS
GNU coreutils online help: <http://www.gnu.org/software/coreutils/>
Report od translation bugs to <http://translationproject.org/team/>
COPYRIGHT
Copyright (C) 2017 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.
SEE ALSO
Full documentation at: <http://www.gnu.org/software/coreutils/od>
or available locally via: info '(coreutils) od invocation'
GNU coreutils 8.28 January 2018 OD(1)