Sponsored Content
Full Discussion: FC Luns rescan issue
Operating Systems Linux Red Hat FC Luns rescan issue Post 302951061 by Peasant on Saturday 1st of August 2015 01:35:52 AM
Old 08-01-2015
Did you (or someone else) removed or resized any SAN luns from non-working host recently ?
Or did you present a disk with same WWID as in some point in the past (same storage and host lun number, but different size) ?

Did you diff the output from multipath -ll from both hosts ?

If everything is okay (FC/host wise), you can always try rebooting the host that doesn't see the disks, rather then spending hours on fixing stuff like kernel sees lun sized xy and on storage is setuped and presented with different size and similar situations.

Couple of suggestions for future notice :

1. Have names in multipath.conf, it is more user friendly then 'mpathxy' generic name.
If you are creating documentation (you should Smilie ), it will be easier to write and maintain it.
2. Create one primary partition when giving disks to services, in this case ASM, don't give whole disks (first sector is for OS usage).
 

10 More Discussions You Might Find Interesting

1. HP-UX

HP LV's for Hitachin Luns

Hi, This is my first post and I hope I can present my questions the right way. I am going to be asked to create logical volumes for a Hitachi SAN device on a New HP 11 server. Currently, They are running their data on a EMC (prod server). They are looking to convert the data and filesystems over to... (3 Replies)
Discussion started by: Uni-dev
3 Replies

2. AIX

creating luns vg

Hi All, I have these config on my old ssa. Vg4 22GB (pps 256) Vg2 88GB (pps 128) Vg3 22GB (pps 256) Vg8 88GB (pps 128) Vg13 106GB (pps 32) Vg12 106GB (pps 32) Vg10 54GB (pps 64) Vg11 54GB (pps 64) When I create a lun on my san do I need to specify the same pps. If yes,... (1 Reply)
Discussion started by: itik
1 Replies

3. AIX

LUNS in AIX

Hi team, 2E493F13 0612155010 P H dac0 ARRAY OPERATION ERROR 2E493F13 0612155010 P H dac0 ARRAY OPERATION ERROR 2E493F13 0612155010 P H dac0 ARRAY OPERATION ERROR 2E493F13 0612154910 P H dac0 ARRAY OPERATION ERROR 2E493F13 0612154910 P H dac0 ... (4 Replies)
Discussion started by: kkeng808
4 Replies

4. Linux

Rescan LUNs on Linux VM

Hi, I have presented a new 70GB LUN to my RedHat Linux VM server. How do I rescan for the new LUN? Thanks, Sparcman:confused: (2 Replies)
Discussion started by: sparcman
2 Replies

5. Red Hat

Adding LUNs to system

Hi guys I have been asked for the following: SMI Oracle database PTP10 Oracle 10g RAC on usdfslprac4 and usdfslprac5 Linux boxes is reaching its space limit. It is just 20 GB away from being completely out of disk space. And then database will stop working and SMI system hence will be impacted.... (0 Replies)
Discussion started by: 300zxmuro
0 Replies

6. Solaris

luns

how to create luns plzzzzzz (1 Reply)
Discussion started by: nsusheelgoud
1 Replies

7. BSD

How to rescan scsi bus without reboot on OpenBSD

Hello, My question as title, I don't know the exact command, anyone could tell me about it? Kevin (0 Replies)
Discussion started by: guixingyi
0 Replies

8. Red Hat

Scan For new LUNS

In Solaris the administrator has to update /kernel/drv/sd.conf file to tell the sd driver to scan for a broader range of scsi devices. Can someone please tell me what file needs to be update in Redhat Linux 5 for the same. Second part of the question is WWN for HBA's can be found (atleast in my... (1 Reply)
Discussion started by: Tirmazi
1 Replies

9. Red Hat

Rescan scsi not working in Redhat 9

Hi all i am adding one more scsi hdd in my vmware testing environment with Redhat 9 . But the following commands are not working i found that these commands working on rhel 6. ls /sys/class/scsi_host echo "- - -" > /sys/class/scsi_host/host0/scan please let me know the commands for rehat... (0 Replies)
Discussion started by: Vaibhav.T
0 Replies

10. Red Hat

Rescan for scsi

Hi All, is there a way of rescanning for newly attached SCSI without rebooting the server? any help greatly appreciated thanks in advance Kb (4 Replies)
Discussion started by: kilobyter
4 Replies
cmdk(7D)							      Devices								  cmdk(7D)

NAME
cmdk - common disk driver SYNOPSIS
cmdk@target, lun : [ partition | slice ] DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable disks. The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin- gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit- ted. The names of the block files are found in /dev/dsk; the names of the raw files are found in /dev/rdsk. I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL error. Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area. Fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program. FILES
/dev/dsk/cndn[s|p]n block device (IDE) /dev/rdsk/cndn[s|p]n raw device (IDE) where: cn controller n dn lun n (0-7) sn UNIX system slice n (0-15) pn fdisk partition(0) /kernel/drv/cmdk 32-bit kernel module. /kernel/drv/amd64/cmdk 64-bit kernel module. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |x86 | +-----------------------------+-----------------------------+ SEE ALSO
fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I) SunOS 5.10 9 Oct 2004 cmdk(7D)
All times are GMT -4. The time now is 07:02 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy