hi i have created a pool using zpool command for my /dev/dsk/c1d0s3 disk.
The poolname is qwertyuiopasdfghjklmnbvcxzzxcvbnmasdfghjklqwertyuiopoiuytrewqasdfghjklkjhgfdsazxcvbnmmnbnbcxczxzassd
ddddvfhfghgjjgjhgkhkljfjlhohihiuyuioyguioyguiowyuiogwyuigwrigywuigyguiyuiogyugiyguioyuyguiowygiuygui... (1 Reply)
hi ...
i have added a physical disk to the pool with
""zpool add <poolname> diskname"""... after that i realized that i have to mirror it instead..then i tried to take that disk out of the pool but i m not able to do that..
i have gone through many unix help sites , nothing worked ,
so please... (6 Replies)
Hi,
I have an X86pc with Solaris 10 and ZFS system. It has 8 similar disks.
I need help in creating some zpools and changing the mount-point of a slice.
Currently, the zpool in my system is like this:
root@abcxxx>zpool status
pool: rpool
state: ONLINE
scrub: none requested... (4 Replies)
Hello,
Does anyone know how I can tell what disk are being not being used by a zpool?
For example in Veritas Volume manager, I can run a "vxdisk list" and disks that are marked as "online invalid" are disk that are not used.
I'm looking for a similar command in ZFS which will easily show... (5 Replies)
Hi All,
I am getting zpool corrupted message under zpool status command.What could be the reason for this.I had observed this zpool was full this morning after this i am seeing this error.
$PWD>zpool status -xv R5
pool: R5
state: DEGRADED
status: One or more devices has experienced... (0 Replies)
Hello experts,
I have a solaris 10 (SunOS 5.10 Generic_148888-05 sun4u sparc SUNW,SPARC-Enterprise) that by mistake I added a second san space of 700g to the pool. the whole pool is now 1.2T and, I need to take the space away from the pool and, make the pool 700g total. this is live oracle... (7 Replies)
I have a single zpool with 3 2-way mirrors ( 3 x 2 way vdevs) it has a degraded disk in mirror-2, I know I can suffer a single drive failure, but looking at this how many drive failures can this suffer before it is no good? On the face of it, I thought that I could lose a further 2 drives in each... (4 Replies)
Now this doesnt look right to me. All of these disks are 100Gb LUNS so total zpool size is 300Gb.
Am I right in saying that this zpool consists of two disks plus one more disk that is 6 way mirrored?
So a bit pointless because only one of the three is mirrored (and 6 way is a bit of overkill... (3 Replies)
Discussion started by: psychocandy
3 Replies
LEARN ABOUT PHP
installboot
installboot(1M)installboot(1M)NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)