Rebuild RAID 1 from BIOS only option? Post: 302950078

8 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

best way to rebuild a kernel

i really have an issue with the otherwise outstading FreeBSD Handbook when it comes to kernel building. information on the proper steps to take is really confusing. i think that chapters 9 and 21 need to be combined to give a very concise format on how best to deal with kernel building/rebuidling...

2. Solaris

X4100 Bios RAID question

Hi there the Sunfire X4100 has a great tool that you can get to from BIOS called the configuration utility which allows you to set up Disk mirroring (RAID 1) before the OS sees it, which is great and it works a treat, however, we have a large datacentre across multiuple sites and I need to find...

3. Shell Programming and Scripting

option followed by : taking next option if argument missing with getopts

Hi all, I am parsing command line options using getopts. The problem is that mandatory argument options following ":" is taking next option as argument if it is not followed by any argument. Below is the script: while getopts :hd:t:s:l:p:f: opt do case "$opt" in -h|-\?)...

4. Shell Programming and Scripting

recently introduced to the newer option for find...does an older option exist?

To find all the files in your home directory that have been edited in some way since the last tar file, use this command: find . -newer backup.tar.gz Is anyone familiar with an older solution? looking to identify files older then 15mins across several directories. thanks, manny

5. UNIX for Dummies Questions & Answers

RAID software vs hardware RAID

Hi Can someone tell me what are the differences between software and hardware raid ? thx for help.

6. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI...

7. Solaris

Software RAID on top of Hardware RAID

Server Model: T5120 with 146G x4 disks. OS: Solaris 10 - installed on c1t0d0. Plan to use software raid (veritas volume mgr) on c1t2d0 disk. After format and label the disk, still not able to detect using vxdiskadm. Question: Should I remove the hardware raid on c1t2d0 first? My...

8. Red Hat

RAID Configuration for IBM Serveraid-7k SCSI RAID Controller

Hello, I want to delete a RAID configuration an old server has. Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton? I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i...

LEARN ABOUT OPENSOLARIS

mega_sas

mega_sas(7D)							      Devices							      mega_sas(7D)

NAME

       mega_sas - SCSI HBA driver for LSI MegaRAID SAS controller

DESCRIPTION

       The mega_sas MegaRAID controller host bus adapter driver  is a  SCSA-compliant  nexus  driver that supports the Dell PERC 5/E, 5/i, 6/E and
       6/i RAID controllers, the IBM ServeRAID-MR10k SAS/SATA  controller and  the  LSI  MegaRAID  SAS/SATA  8308ELP,  8344ELP,  84016E,  8408ELP,
       8480ELP, 8704ELP, 8704EM2, 8708ELP, 8708EM2, 8880EM2 and 8888ELP series of controllers.

       Supported  RAID	features  include RAID levels 0, 1, 5, and 6, RAID spans 10, 50 and 60, online capacity expansion (OCE), online RAID level
       migration (RLM), auto resume after loss of  system power during arrays, array rebuild or reconstruction (RLM) and configurable stripe  size
       up  to  1MB. Additional supported RAID features include check consistency for background data integrity, patrol read for media scanning and
       repairing, 64 logical drive support, up to 64TB LUN support, automatic rebuild and global and dedicated hot spare support.

CONFIGURATION

       The mega_sas.conf file contains no user configurable parameters. Please configure your hardware through the related  BIOS  utility  or  the
       MegaCli	configuration  utility.  If  you  want to install to a drive attached to a mega_sas HBA, you should create the virtual drive first
       from the BIOS before running the Solaris install. You can obtain the MegaCli utility from the LSI website.

       The mega_sas device can support up to  64 virtual disks. Note that BIOS numbers the virtual disks as 1 through 64, however in  the  Solaris
       operating  environment virtual disks are numbered from 0 to 63.	Also note that SAS and SATA drives cannot be configured into the same vir-
       tual disk.

KNOWN PROBLEMS AND LIMITATIONS

       The mega_sas driver does not support the LSI MegaRAID SAS 8204ELP, 8204XLP, 8208ELP, and 8208XLP controllers.

FILES

       /kernel/drv/mega_sas	     32-bit ELF kernel module. (x86)

       /kernel/drv/amd64/mega_sas    64-bit kernel   module. (x86)

       /kernel/drv/mega_sas.conf     Driver configuration file (contains no user-configurable options).

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |x86-based systems 	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWmegasas		   |
       +-----------------------------+-----------------------------+
       |Interface stability	     |Uncommitted		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       prtconf(1M), attributes(5), sata(7D), scsi_hba_attach_setup(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S),  scsi_device(9S),
       scsi_pkt(9S)

       Small Computer System Interface-2 (SCSI-2)

SunOS 5.11							    14 Aug 2008 						      mega_sas(7D)