IBSYSSTAT(8)							Open IB Diagnostics						      IBSYSSTAT(8)

NAME

       IBSYSSTAT -

system status on an InfiniBand address
   SYNOPSIS
       ibsysstat [options] <dest lid | guid> [<op>]

   DESCRIPTION
       ibsysstat  uses	vendor	mads to validate connectivity between IB nodes and obtain other information about the IB node. ibsysstat is run as
       client/server. Default is to run as client.

   OPTIONS
       Current supported operations:

       ping - verify connectivity to server (default)
       host - obtain host information from server
       cpu  - obtain cpu information from server

       -o, --oui

	      use specified OUI number to multiplex vendor mads

       -S, --Server

	      start in server mode (do not return)

   Addressing Flags
       -G, --Guid     The address specified is a Port GUID

       -L, --Lid   The address specified is a LID

       -s, --sm_port <smlid>	 use 'smlid' as the target lid for SA queries.

   Port Selection flags
       -C, --Ca <ca_name>    use the specified ca_name.

       -P, --Port <ca_port>    use the specified ca_port.

   Local port Selection
       Multiple port/Multiple CA support: when no IB device or port is specified (see the "local umad parameters" below),  the	libibumad  library
       selects the port to use by the following criteria:

	  1. the first port that is ACTIVE.

	  2. if not found, the first port that is UP (physical link up).

	  If a port and/or CA name is specified, the libibumad library attempts to fulfill the user request, and will fail if it is not possible.

	  For example:

	  ibaddr		 # use the first port (criteria #1 above)
	  ibaddr -C mthca1	 # pick the best port from "mthca1" only.
	  ibaddr -P 2		 # use the second (active/up) port from the first available IB device.
	  ibaddr -C mthca0 -P 2  # use the specified port only.

   Debugging flags
       -d     raise the IB debugging level.  May be used several times (-ddd or -d -d -d).

       -e     show send and receive errors (timeouts and others)

       -h, --help      show the usage message

       -v, --verbose

	      increase the application verbosity level.  May be used several times (-vv or -v -v -v)

       -V, --version	 show the version info.

   Configuration flags
       -t, --timeout <timeout_ms> override the default timeout for the solicited mads.

       --config, -z  <config_file> Specify alternate config file.

	  Default: /etc/infiniband-diags/ibdiag.conf

   FILES
   CONFIG FILE
       /etc/infiniband-diags/ibdiag.conf

       A global config file is provided to set some of the common options for all tools.  See supplied config file for details.

   AUTHOR
       Hal Rosenstock
	      < halr@voltaire.com >

																      IBSYSSTAT(8)