06-27-2015
I just read the Unixware 714 getting started guide.
An upgrade install is possible. But, it installs using pkgadd. You must be able to boot the 711 system in order to do the upgrade. This procedure is different to the Openserver 5 upgrade installation procedure, where you boot from the newer version CD and select the upgrade install.
For the fresh install (of 714), there does not appear to be an option to preserve non root file systems that are on disk 0. So if your RAID5 system is configured as a single logical drive with multiple partitions, you do not have secondary drives.
The RAID controller supports both SAS and SATA drives, although not mixed. I have not checked to see if a standard 2.5in SATA drive will fit in the carrier, or whether you have to purchase an HP drive.
http://sco.com/support/docs/unixware...t/getstart.pdf
Last edited by jgt; 06-27-2015 at 08:50 AM..
Reason: add link
10 More Discussions You Might Find Interesting
1. Programming
dear all ,
iam trying to compile a progam using gcc compiler on a sun 280 R machine running solaris 9 .
iam getting an error in the last step when the compiler tries to link the objects , although the compiler executes some applicarions that contains no objects smoothly,
the error that... (1 Reply)
Discussion started by: ppass
1 Replies
2. UNIX for Dummies Questions & Answers
Hi
i have both Linux and Windows XP on my PC.
i used to use grub as a boot loader and everything was perfect, until
i reinstalled Windows.
apparently, Windows installer installed its own bootloader, that
doesn't recognize Linux.
i tried using a tool called GrubInstaller for Windows, and now... (4 Replies)
Discussion started by: shx2
4 Replies
3. Programming
Hi,
I just pulled out my code from source control, then I compiled, the compilation is successful at that time.
Then I modified one of the source file, Then I compiled, I got the following error
ld: fatal: Symbol referencing errors. No output written to ../../CM/bin/cato
Before... (1 Reply)
Discussion started by: sarwan
1 Replies
4. UNIX for Dummies Questions & Answers
zero experience Unix user here. Cannot boot our Sparc10.
Running:
SunOS release 5.3 Version Generic_Patch
message says:
(Can't load swapgeneric)
Program terminated
Tried to 'boot -s' , but this looks like a problem w/ Generic_Patch maybe?
At bootup, the devices come up fine and it... (0 Replies)
Discussion started by: man_of_action
0 Replies
5. Solaris
I modified the partitions on my Solaris 10 disk using format command in "boot cdrom -s" mode and then tried rebooting with "reboot". It said "Boot load failed".
Why does this happen?
I have faced this error before:( and I went in for a fresh installation of the OS.Can anyone tell me the reason as... (1 Reply)
Discussion started by: lydiaEd
1 Replies
6. SCO
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
Discussion started by: ccc
16 Replies
7. Solaris
This is the error message that I am getting on a Solaris 10 sparc server
scsi: no major number
cannot load drivers for /pci@400.....
Can't load the root filesystem
Type 'go' to resume
{0} ok
Is there a way for me to correct this issue. It looks like I am missing a scsi driver to boot up... (5 Replies)
Discussion started by: trinityforce
5 Replies
8. Solaris
Dear all,
I Need your help,my server v240 with sun solaris 10 can't remote login.I try conncet via rsc and then go to OK prom....and i get the status :
{1} ok boot -a
FATAL: system is not bootable, boot command is disabled
{1} ok boot cdrom -s
FATAL: system is not bootable, boot command is... (2 Replies)
Discussion started by: fredginting
2 Replies
9. Solaris
I have M10-1. Installation OS 10 from cdrom external.
Here message from OK Prompt
{0} ok probe-scsi-all
/pci@8000/pci@4/pci@0/pci@2/pci@0/usb@4,1/cdrom@1
Unit 0 Removable Read Only device HL-DT-STDVDRAM GP65NB60 PF00
But..
{0} ok boot... (3 Replies)
Discussion started by: mbahjiman
3 Replies
10. What is on Your Mind?
Today, I noticed some errors in our SSL cert renewal log files, mostly related to domains where the IP address had changed. Concerned about this, rebuilt out SSL cert, which normally goes well without a hiccup.
However, for today, for some reason which I cannot explain, there was a PHP error... (0 Replies)
Discussion started by: Neo
0 Replies
LEARN ABOUT SUSE
grub-install.unsupported
GRUB-INSTALL(8) FSF GRUB-INSTALL(8)
NAME
grub-install - install GRUB on your drive
SYNOPSIS
grub-install [OPTION] install_device
DESCRIPTION
Install GRUB on your drive.
-h, --help
print this message and exit
-v, --version
print the version information and exit
--root-directory=DIR
install GRUB images under the directory DIR instead of the root directory
--grub-shell=FILE
use FILE as the grub shell
--no-floppy
do not probe any floppy drive
--force-lba
force GRUB to use LBA mode even for a buggy BIOS
--recheck
probe a device map even if it already exists
INSTALL_DEVICE can be a GRUB device name or a system device filename.
grub-install copies GRUB images into the DIR/boot directory specfied by --root-directory, and uses the grub shell to install grub into the
boot sector.
The grub source distribution carries this script to ease the installation of grub as a boot loader. In Suse Linux however, grub installa-
tion is much better handled by Yast; use of this script is generally discouraged and therefore unsupported. Consequently, the script has
been renamed to grub-install.unsupported.
In order to (re-)install grub for the currently running system, simply use Yast. For an installation aiming at a differing system, the
crafting of an appropriate device.map and grub shell script is strongly advised, e.g. "grub --batch --device-map=target-device.map < tar-
get-grub.conf"
SEE ALSO
The full documentation for grub-install is maintained as a Texinfo manual. If the info and grub-install programs are properly installed at
your site, the command
info grub-install
should give you access to the complete manual.
grub-install (GNU GRUB 0.97) May 2005 GRUB-INSTALL(8)