Hi,
when installing a piece of third part software I get the error "Bad magic number" at one point when it tries to use libraries from the bea tuxedo server. Am I correct that this means that the software is expecting 32bit while I'm on 64bit? Is there a way around it or can it only be solved... (5 Replies)
I tried rebooting my Sun server just a few minutes ago and I got the following at boot:
--
Sun Fire 280R (UltraSPARC-III+) , No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.5, 1024 MB memory installed, Serial #xxxxxxxxx
Ethernet address... (6 Replies)
Dear All,
i have a SCSI hard disk drive i'm installing on it solaris 5 and the workstation is sun sparc, i made an image of this H.D using Norton Ghost 6, so i took off the SCSI H.D from the sun workstation and put it on a Compaq server then i booted the server from the Norton Ghost floppy disk... (0 Replies)
Hello All,
(RHEL4)
Few weeks ago I had posted a message in this forum about the problem I had when I replaced my two scsi disks and tried rebuild raid1 array.
I somehow managed to up the system with working raid1 array.
But the main problem persisted..
i.e when I reboot the system, mounting... (0 Replies)
Hello All,
I m very new to this forum.
i m having SUN NETRA X1 server with 40 GB HDD (Seagate) & 128 MB RAM.
i m trying this server for SUN 10 Practise.
As i m installing SUN 9 /10 with CD ,its giving me error after OK propmt
***************************
#boot cdrom
or
#boot cdrom... (16 Replies)
Hello,
I'm brand new to Sun/Solaris.
I have a Sun Blade 150, with SunOS 5.8.
I wanted to make a backup to prevent future data loss, so I put the disk in a normal PC with Windows XP to try to make a backup with Norton Ghost, the disk was detected, but not the file volume, so I place the disk... (6 Replies)
I'll keep it fairly straight forward. I work with a Solaris server and magically today it decided to take a dump on me. At first it give a long list of files that couldn't be acessed before terminating the boot process and returning to the 'ok' prompt. Booting in single-user mode allowed me to run... (4 Replies)
I have created 1 LUN.
1)LUN 00BB 200GB /dev/rdsk/c1t3d44
/dev/rdsk/c2t28d44
/dev/rdsk/c3t19d44
/dev/rdsk/c4t12d44
2) Already added the new entry into sd.conf and rebooted.
3) Already done these:
powercf –q
power config
4) power display dev=all
I can see the new Symmetrix device.... (1 Reply)
So we have a new to us v240 server with no OS installed. It has an outdated version of OB and ALOM so before we install the OS we want to update both. We have a DVD with the latest OB patch burned on it.
We do the boot cdrom command but receive the Bad Magic Number Error. Does an OS need to... (2 Replies)
Discussion started by: dunkpancakes
2 Replies
LEARN ABOUT PHP
gmmktime
GMMKTIME(3) 1 GMMKTIME(3)gmmktime - Get Unix timestamp for a GMT dateSYNOPSIS
int gmmktime ([int $hour = gmdate("H")], [int $minute = gmdate("i")], [int $second = gmdate("s")], [int $month = gmdate("n")], [int
$day = gmdate("j")], [int $year = gmdate("Y")], [int $is_dst = -1])
DESCRIPTION
Identical to mktime(3) except the passed parameters represents a GMT date. gmmktime(3) internally uses mktime(3) so only times valid in
derived local time can be used.
Like mktime(3), arguments may be left out in order from right to left, with any omitted arguments being set to the current corresponding
GMT value.
PARAMETERS
o $hour
- The number of the hour relative to the start of the day determined by $month, $day and $year. Negative values reference the hour
before midnight of the day in question. Values greater than 23 reference the appropriate hour in the following day(s).
o $minute
- The number of the minute relative to the start of the $hour. Negative values reference the minute in the previous hour. Values
greater than 59 reference the appropriate minute in the following hour(s).
o $second
- The number of seconds relative to the start of the $minute. Negative values reference the second in the previous minute. Values
greater than 59 reference the appropriate second in the following minute(s).
o $month
- The number of the month relative to the end of the previous year. Values 1 to 12 reference the normal calendar months of the
year in question. Values less than 1 (including negative values) reference the months in the previous year in reverse order, so 0
is December, -1 is November, etc. Values greater than 12 reference the appropriate month in the following year(s).
o $day
- The number of the day relative to the end of the previous month. Values 1 to 28, 29, 30 or 31 (depending upon the month) refer-
ence the normal days in the relevant month. Values less than 1 (including negative values) reference the days in the previous
month, so 0 is the last day of the previous month, -1 is the day before that, etc. Values greater than the number of days in the
relevant month reference the appropriate day in the following month(s).
o $year
- The year
o $is_dst
- Parameters always represent a GMT date so $is_dst doesn't influence the result.
Note
This parameter has been removed in PHP 7.0.0.
RETURN VALUES
Returns a integer Unix timestamp.
CHANGELOG
+--------+---------------------------------------------------+
|Version | |
| | |
| | Description |
| | |
+--------+---------------------------------------------------+
| 7.0.0 | |
| | |
| | $is_dst parameter has been removed. |
| | |
| 5.1.0 | |
| | |
| | As of PHP 5.1.0, the $is_dst parameter became |
| | deprecated. As a result, the new timezone han- |
| | dling features should be used instead. |
| | |
+--------+---------------------------------------------------+
EXAMPLES
Example #1
gmmktime(3) basic example
<?php
// Prints: July 1, 2000 is on a Saturday
echo "July 1, 2000 is on a " . date("l", gmmktime(0, 0, 0, 7, 1, 2000));
?>
SEE ALSO mktime(3), date(3), time(3).
PHP Documentation Group GMMKTIME(3)