Thanks everyone for all the help, I ended up using Ultimate Boot CD which has smartmontools 6.4 and GSmartControl on it. It is able to run SMART tests on each HDD individually (It took me a while to realize that the seperate HDDs are /dev/sg# and not /dev/sd#). I didn't have any luck though as they were all OK.
I have aarconf on RedHat but other than using:
To see that all my HDDs are present and presumably working well I didn't find any way to test that the RAID controller itself is working properly.
Do you know of any such tests?
I am facing a problem to install sco 5.0.6 in Dell Power Edge SC1420 which raid controller is ultra 320 scsi raid controller .
how/from where to download the ultra 320 scsi raid controller driver for sco 5.0.6.
Plz help with any idea
karzon (1 Reply)
recently we have purchased hp proliant ml350 g5 server and configured raid 5 with hp smartarray p200i sas controller.but i could not found any sas raid controller hp smartarry p200i driver for sco unix 5.0.7 :(.i searched on hp support site,but no use.any one can help. (3 Replies)
hi
this may be a very stupid question, but im quite new to Solaris (gonna buid my first system, Solaris 10 on x86 system, connected to other windows systems in a home network)
i wanna put a RAID 5 system in there to back up my other systems at home; iv read that its really so easy with SVM to... (4 Replies)
I am planning on building a fedora box with raid controller (database server).
Is anybody done that ? also what kind of software do you need to backup and recover data. (1 Reply)
Hi,
We have a Sunfire 4150 with On-Board Internal Raid Controller connected to 4 X 146 GB SAS disks.
This also has an External Raid Controller (Storagetek Eight-Port, External HBA
Model SG-XPCIESAS-R-EXT-Z) connected to a JBOD array ( Storagetek XTA2530 ) which has 5 X 300 GB Hard disk.
... (1 Reply)
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Hi All,
I am searching for some files (*.sem and *.chk and *.temp) in morethan one directories.
if i found .sem and .chk files(base name should be same) i am deleting these 2 files because i need to delete .chk files if i found respective .sem file
i am also deleting other .sem files only... (6 Replies)
Hi all,
A client has an SCO OpenServer Server 6.0, that is running on an HP ProLiant Box and they lost the root password.
Its equipped with a Doal-Core Intel Pentium Processor. They don't have any media or emergency disk anymore.
I tried to boot with the CD Rom, then "Tools", then exit to... (7 Replies)
Discussion started by: thm2222
7 Replies
LEARN ABOUT OPENSOLARIS
amt
amt(1) User Commands amt(1)NAME
amt - run abstract machine test
SYNOPSIS
amt [-s]
DESCRIPTION
The amt command is for use in a Common Criteria security certified system. The command is used to verify that the low level functions nec-
essary to enforce the object reuse requirements of the Controlled Access Protection Profile are working correctly. /usr/bin/amt is a shell
script that executes tests specific to your system. For a 32-bit system, the tests run as a 32-bit application. For a 64-bit system, the
tests run twice; once as a 32-bit application and once as a 64-bit application.
amt lists test results with a pass or fail for each test it performs, unless output is suppressed with the -s option.
OPTIONS
The following option is supported:
-s Suppresses output.
EXIT STATUS
The following error values are returned:
0 All tests passed.
>0 Count of the number of tests that failed.
<0 Incorrect command line argument.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Committed |
+-----------------------------+-----------------------------+
SEE ALSO attributes(5)SunOS 5.11 19 Aug 2003 amt(1)