Hi,
when installing a piece of third part software I get the error "Bad magic number" at one point when it tries to use libraries from the bea tuxedo server. Am I correct that this means that the software is expecting 32bit while I'm on 64bit? Is there a way around it or can it only be solved... (5 Replies)
I tried rebooting my Sun server just a few minutes ago and I got the following at boot:
--
Sun Fire 280R (UltraSPARC-III+) , No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.5, 1024 MB memory installed, Serial #xxxxxxxxx
Ethernet address... (6 Replies)
Dear All,
i have a SCSI hard disk drive i'm installing on it solaris 5 and the workstation is sun sparc, i made an image of this H.D using Norton Ghost 6, so i took off the SCSI H.D from the sun workstation and put it on a Compaq server then i booted the server from the Norton Ghost floppy disk... (0 Replies)
Hello All,
(RHEL4)
Few weeks ago I had posted a message in this forum about the problem I had when I replaced my two scsi disks and tried rebuild raid1 array.
I somehow managed to up the system with working raid1 array.
But the main problem persisted..
i.e when I reboot the system, mounting... (0 Replies)
Hello All,
I m very new to this forum.
i m having SUN NETRA X1 server with 40 GB HDD (Seagate) & 128 MB RAM.
i m trying this server for SUN 10 Practise.
As i m installing SUN 9 /10 with CD ,its giving me error after OK propmt
***************************
#boot cdrom
or
#boot cdrom... (16 Replies)
Hello,
I'm brand new to Sun/Solaris.
I have a Sun Blade 150, with SunOS 5.8.
I wanted to make a backup to prevent future data loss, so I put the disk in a normal PC with Windows XP to try to make a backup with Norton Ghost, the disk was detected, but not the file volume, so I place the disk... (6 Replies)
I'll keep it fairly straight forward. I work with a Solaris server and magically today it decided to take a dump on me. At first it give a long list of files that couldn't be acessed before terminating the boot process and returning to the 'ok' prompt. Booting in single-user mode allowed me to run... (4 Replies)
I have created 1 LUN.
1)LUN 00BB 200GB /dev/rdsk/c1t3d44
/dev/rdsk/c2t28d44
/dev/rdsk/c3t19d44
/dev/rdsk/c4t12d44
2) Already added the new entry into sd.conf and rebooted.
3) Already done these:
powercf –q
power config
4) power display dev=all
I can see the new Symmetrix device.... (1 Reply)
So we have a new to us v240 server with no OS installed. It has an outdated version of OB and ALOM so before we install the OS we want to update both. We have a DVD with the latest OB patch burned on it.
We do the boot cdrom command but receive the Bad Magic Number Error. Does an OS need to... (2 Replies)
Discussion started by: dunkpancakes
2 Replies
LEARN ABOUT DEBIAN
tsmoke
TSMOKE(1) SmokePing TSMOKE(1)NAME
tSmoke - Commandline tool for sending SmokePing information
SYNOPSIS
tSmoke [ --testmail | --morning | --weekly | --version | --help | --man]
Options:
--man Show the manpage
--help Help :-)
--version Show SmokePing Version
--testmail Send a test message
--listrrds List the RRDs used by this Smokeping
--morning Send a morning synopsis
--weekly Send a weekly status report
--to E-mail address to send message (i.e. '--to=xyz@company.com.invalid'
--detail How much detail to send in weekly report (i.e. '--detail=1')
--quiet Do not print welcome
DESCRIPTION
The tSmoke tool is a commandline tool which interfaces with the SmokePing system. Its main function is to send a message indicating the
current status of the systems being monitored by Smokeping or an HTML mail file containing the status over the past day, past week and past
month including an overview.
Typical crontab used to invoke this are
# Quick morning alert to see what's down
0 6 * * * /usr/local/smokeping/bin/tSmoke.pl --q --to=mobilephone@att.net.invalid --morning
# Weekly report on the percent availability of network systems with no detail
0 8 * * * /usr/local/smokeping/bin/tSmoke.pl --q --to=mailbox@company.com.invalid --weekly --detail=0
SETUP
When installing tSmoke, some variables must be adjusted to fit your local system.
We need to use the following libraries:
Smokeping
RRDTool Perl bindings
Getopt::Long
Set up your libraries:
use lib "/usr/local/smokeping/lib";
use lib "/usr/local/rrdtool-1.0.39/lib/perl";
Point to your Smokeping config file
my $cfgfile = "/usr/local/smokeping/etc/config";
Modify the Smokeping config file to include a path for tmail in the General section:
tmail = /usr/local/smokeping/etc/tmail
COPYRIGHT
Copyright (c) 2003 by Dan McGinn-Combs. All right reserved.
LICENSE
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation,
Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
AUTHOR
Dan McGinn-Combs <d.mcginn-combs@mindspring.com>
Modified for Smokeping official distribution by Niko Tyni <ntyni@iki.fi>
2.6.8 2012-02-26 TSMOKE(1)