05-26-2015
I've heard that the early Pavilion BIOS's could be buggy. Have you got the latest BIOS?
Is there anything in the BIOS such as "allow the O/S to turn off this device"? If so, disallow that to keep the wifi adapter power on.
Failing that, it's to do with the suspend function of your O/S and finding a way to not power down the wifi adapter.
(O/S's failing to reconnect through wifi adapters which have been powered off and then back on is quite common).
This User Gave Thanks to hicksd8 For This Post:
10 More Discussions You Might Find Interesting
1. AIX
I have an LPAR in a P5 machine which has been setup in an HACMP cluster. The person who set it up allocated the wrong network adapter (en) to the persistent network. For the life of me I cannot find where I can re-assign this adapter. Anyone able to help me as I am tearing my hair out and do not... (1 Reply)
Discussion started by: johnf
1 Replies
2. AIX
hello
i've need to change network adapter on machine H80 aix 4.3.3 hacmp ( ent0 )
what i need to do after the new adapter installed on the machine?
thanks
best regards
ariec (1 Reply)
Discussion started by: ariec
1 Replies
3. AIX
When I configure two VIO Servers, VIOS1 used to ping its gateway, after I configured second VIOS2, VIOS1 cannpt ping its gateway, when I run this command:
entstat -all ent#|grep -i priority
Priority: 5 Active: False
How to make Active to True? (1 Reply)
Discussion started by: rainbow_bean
1 Replies
4. UNIX for Dummies Questions & Answers
Hi All,
I am new here - this is my first post.
I have installed Solaris 10 5/09 on my Dell M6300. The install went well, but the Dell's onboard network card is the Broadcom BCM5756ME Gigabit Ethernet - and sadly no Solaris driver exists for it. The Solaris 10 install just jumped by the... (1 Reply)
Discussion started by: soulmerchant
1 Replies
5. IP Networking
Hi All,
Sorry if this is not the correct forum to answer.
But hope somebody can help me...
For these two types of network adapter:
Intel(R) PRO/1000 MT Server Adapter
Intel(R) PRO/1000 MT Dual Port Network Adapter
How many IP addresses can be configured on it at the same time?
System... (3 Replies)
Discussion started by: wilsonSurya
3 Replies
6. IP Networking
i have wireless usb adapter rtl8187 from micromax company
my proplem is the signal is very weak and i cannot open website
can i increase the signal ?
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0... (5 Replies)
Discussion started by: rsd220
5 Replies
7. UNIX for Dummies Questions & Answers
Hi All
I P2Vd a Unixware 7.1.4 box with VMWare Vsphere. I try to add a network adapter under Network Configuration Manager and it comes up with the error attached.
I've added a virtual adapter using the "E1000" option. It detects both the AMD PCI NET and E1000 virtual adapters under Network... (8 Replies)
Discussion started by: flashinwrx
8 Replies
8. UNIX for Dummies Questions & Answers
Hi all, I got sort of a task to do. I have to write in C "simulated network driver". What does it mean?
- It has to run on all network adapters
- It has to be as simple as it can be
- It has to run on all linux distributions (or at least most of them)
- It does not have to run a network... (4 Replies)
Discussion started by: Chrisdot
4 Replies
9. Hardware
How do I configure my wireless adapter to access the internet? I am running PCLinuxOS 2010. (0 Replies)
Discussion started by: ryan352333
0 Replies
10. SCO
hi .I've installed an operating system SCO in HP Z400 and network cards ZyXEL model FN312 with Chipset RTL8139D put it on .network card installed but do not display network card with command ifconfig -a in list and just show loopback.
show message :
dlpid:unable to open network adapter driver... (14 Replies)
Discussion started by: moein.mojtaba
14 Replies
LEARN ABOUT NETBSD
pnpbios
PNPBIOS(4) BSD/i386 Kernel Interfaces Manual PNPBIOS(4)
NAME
pnpbios -- support for embedded devices on the motherboard
DESCRIPTION
The pnpbios driver enumerates embedded ISA devices on the motherboard whose BIOS supports ``Plug and Play BIOS Specification''. It assigns
ISA bus resources (interrupt line, DMA channel, I/O ports, and memory region) to each device and activates it.
If it cannot assign necessary resources to a device without causing conflict with other devices in the system, the device will not be acti-
vated and will be unavailable to programs.
CAVEATS
There is no explicit way to disable individual embedded devices. The pnpbios driver will find all devices reported by the ``Plug and Play
(PnP)'' BIOS and try to activate them all.
There is no way to explicitly assign particular resource to a device. The resource assignment is fully automatic and there is no provision
for manual override.
SEE ALSO
pnp(4)
STANDARDS
Compaq, Phenix, and Intel, Plug and Play BIOS Specification Version 1.0A, May 5, 1994.
Compaq, Phenix, and Intel, Plug and Play BIOS CLARIFICATION Paper for Plug and Play BIOS Specification Version 1.0A, October 6, 1994.
HISTORY
The pnpbios driver first appeared in FreeBSD 4.0.
AUTHORS
The pnpbios driver was written by Mike Smith.
BSD September 20, 2001 BSD