Sponsored Content
Top Forums Shell Programming and Scripting Automating partitioning setup of /dev/sda on /dev/sdc Post 302944760 by RogerBaran on Thursday 21st of May 2015 03:22:01 PM
Old 05-21-2015
The first time I used the DD to copy the first 2048 sectors off the drive and then I used dd to also copy both of the other partitions. At that point gdisk would complain that I had a corrupt GPT table and that my partition was over running X number of sectors into the next partition. I read somewhere that that's because the way that the drive handles writing the information to the disc is based upon the geometry of the cylinders heads and sectors ...

---------- Post updated at 02:22 PM ---------- Previous update was at 02:19 PM ----------

That's why I decided trying to copy the partition information over to another drive was not a good idea and that what I should actually do is just go ahead and zap a disc get a brand new GPT on there and then format it out one partition at a time and then copy the data into it
 

9 More Discussions You Might Find Interesting

1. Solaris

URGENT - setup port and dump all output to /dev/null or a file

Please help urgently. I need to setup up some sort of service on a solaris server on a port. I dont need it do anything special, anything that is sent to this port from an external server should be dump to /dev/null or a flat file.. Can you help urgently? (1 Reply)
Discussion started by: frustrated1
1 Replies

2. Solaris

What is /dev/tty /dev/null and /dev/console

Hi, Anyone can help My solaris 8 system has the following /dev/null , /dev/tty and /dev/console All permission are lrwxrwxrwx Can this be change to a non-world write ?? any impact ?? (12 Replies)
Discussion started by: civic2005
12 Replies

3. UNIX for Dummies Questions & Answers

Sending alt-n to /dev/pts/1 from process bound to /dev/pts/2

Hello, i am using finch (unix commandline instant messaging client using libgnt) which is running connected to /dev/pts/1 Now I would like to "remote control" the program by sending the key combinations normally typed on the keyboard from a programm in another shell. So I tried:... (0 Replies)
Discussion started by: mentos
0 Replies

4. Slackware

CUPS setup / dev/lp0 perms. ... Slow printing.

Hello, Ive got an HP LaserJet 2100 / parallel interface. I had some troubles getting going due to non-working cups drivers. Updated cups and also used a .ppd.gz file from something HP provided. found the files here... www.linuxprinting.org/show_printer.cgi?recnum=HP-LaserJet_2100 Anyways.... (1 Reply)
Discussion started by: agentrnge
1 Replies

5. Solaris

Lun remove, stuck in /dev/dsk and /dev/rdsk

So, we removed a LUN from the SAN and the system is refusing to remove the references to it in the /dev folder. I've done the following: devfsadm -Cv powermt -q luxadm -e offline <drive path> luxadm probe All those commands failed to remove the path. The drive stills shows up as <drive... (13 Replies)
Discussion started by: DustinT
13 Replies

6. AIX

Difference between /dev/hdisk and /dev/rhdisk

Hi, How can i check that i am using RAW devices for storage in my AIX machine... Also after adding a LUN from storage to a aix host, when i check /dev in the host, i can see both rhdisk and hdisk with same number eg: dcback1(root):/dev>ls -lrt | grep disk12 crw------- 1 root ... (4 Replies)
Discussion started by: jibujacob
4 Replies

7. AIX

Problem in /dev/hd1 and /dev/hd9var

Hello AIXians, I can't boot my AIX, it hangs and stops at the code error: 0518 After searching google, I knew the problem is due to problems in File Systems. So the solution is booting from any bootable media, then run these commands in maintenance mode: #fsck -y /dev/hd4 #fsck -y... (3 Replies)
Discussion started by: Mohannad
3 Replies

8. Red Hat

Changing grub from /dev/sda to /dev/sdb

Hi, Please suggest steps to change grub from /dev/sda to /dev/sdb, (1 Reply)
Discussion started by: manoj.solaris
1 Replies

9. HP-UX

Dev/urandom and dev/random missing in HP-UX

Hi, In our HP-UX B.11.11. I could not find dev/urandom and dev/random Are all pseudo-devices implemented as device drivers, or in need to run /configure some package to install the package to have dev/urandom. Please help (4 Replies)
Discussion started by: rashi
4 Replies
scrounge-ntfs(8)					    BSD System Manager's Manual 					  scrounge-ntfs(8)

NAME
scrounge-ntfs -- helps retrieve data from corrupted NTFS partitions SYNOPSIS
scrounge-ntfs -l disk scrounge-ntfs -s disk scrounge-ntfs [-m mftoffset] [-c clustersize] [-o outdir] disk start end DESCRIPTION
scrounge-ntfs is a utility that can rescue data from corrupted NTFS partitions. It writes the files retrieved to another working file system. Certain information about the partition needs to be known in advance. The -l mode is meant to be run in advance of the data corruption, with the output stored away in a file. This allows scrounge-ntfs to recover data reliably. See the 'NOTES' section below for recover info when this isn't the case. OPTIONS
The options are as follows: -c The cluster size (in sectors). When not specified a default of 8 is used. -l List partition information for a drive. This will only work when the partition table for the given drive is intact. -m When recovering data this specifies the location of the MFT from the beginning of the partition (in sectors). If not specified then no directory information can be used, that is, all rescued files will be written to the same directory. -o Directory to put rescued files in. If not specified then files will be placed in the current directory. -s Search disk for partition information. (Not implemented yet). disk The raw device used to access the disk which contains the NTFS partition to rescue files from. eg: '/dev/hdc' start The beginning of the NTFS partition (in sectors). end The end of the NTFS partition (in sectors) NOTES
If you plan on using this program sucessfully you should prepare in advance by storing a copy of the partition information. Use the -l option to do this. Eventually searching for disk partition information will be implemented, which will solve this problem. When only one partition exists on a disk or you want to rescue the first partition there are ways to guess at the sector sizes and MFT loca- tion. See the scrounge-ntfs web page for more info: http://memberwebs.com/swalter/software/scrounge/ AUTHOR
Stef Walter <stef@memberwebs.com> scrounge-ntfs June 1, 2019 scrounge-ntfs
All times are GMT -4. The time now is 03:09 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy