05-21-2015
The first time I used the DD to copy the first 2048 sectors off the drive and then I used dd to also copy both of the other partitions. At that point gdisk would complain that I had a corrupt GPT table and that my partition was over running X number of sectors into the next partition. I read somewhere that that's because the way that the drive handles writing the information to the disc is based upon the geometry of the cylinders heads and sectors ...
---------- Post updated at 02:22 PM ---------- Previous update was at 02:19 PM ----------
That's why I decided trying to copy the partition information over to another drive was not a good idea and that what I should actually do is just go ahead and zap a disc get a brand new GPT on there and then format it out one partition at a time and then copy the data into it
9 More Discussions You Might Find Interesting
1. Solaris
Please help urgently.
I need to setup up some sort of service on a solaris server on a port.
I dont need it do anything special, anything that is sent to this port from an external server should be dump to /dev/null or a flat file..
Can you help urgently? (1 Reply)
Discussion started by: frustrated1
1 Replies
2. Solaris
Hi, Anyone can help
My solaris 8 system has the following
/dev/null , /dev/tty and /dev/console
All permission are lrwxrwxrwx
Can this be change to a non-world write ??
any impact ?? (12 Replies)
Discussion started by: civic2005
12 Replies
3. UNIX for Dummies Questions & Answers
Hello,
i am using finch (unix commandline instant messaging client using libgnt) which is running connected to /dev/pts/1
Now I would like to "remote control" the program by sending the key combinations normally typed on the keyboard from a programm in another shell. So I tried:... (0 Replies)
Discussion started by: mentos
0 Replies
4. Slackware
Hello,
Ive got an HP LaserJet 2100 / parallel interface.
I had some troubles getting going due to non-working cups drivers. Updated cups and also used a .ppd.gz file from something HP provided. found the files here...
www.linuxprinting.org/show_printer.cgi?recnum=HP-LaserJet_2100
Anyways.... (1 Reply)
Discussion started by: agentrnge
1 Replies
5. Solaris
So, we removed a LUN from the SAN and the system is refusing to remove the references to it in the /dev folder. I've done the following:
devfsadm -Cv
powermt -q
luxadm -e offline <drive path>
luxadm probe
All those commands failed to remove the path. The drive stills shows up as <drive... (13 Replies)
Discussion started by: DustinT
13 Replies
6. AIX
Hi,
How can i check that i am using RAW devices for storage in my AIX machine...
Also after adding a LUN from storage to a aix host, when i check /dev in the host, i can see both rhdisk and hdisk with same number
eg:
dcback1(root):/dev>ls -lrt | grep disk12
crw------- 1 root ... (4 Replies)
Discussion started by: jibujacob
4 Replies
7. AIX
Hello AIXians,
I can't boot my AIX, it hangs and stops at the code error: 0518
After searching google, I knew the problem is due to problems in File Systems.
So the solution is booting from any bootable media, then run these commands in maintenance mode:
#fsck -y /dev/hd4
#fsck -y... (3 Replies)
Discussion started by: Mohannad
3 Replies
8. Red Hat
Hi,
Please suggest steps to change grub from /dev/sda to /dev/sdb, (1 Reply)
Discussion started by: manoj.solaris
1 Replies
9. HP-UX
Hi,
In our HP-UX B.11.11. I could not find dev/urandom and dev/random
Are all pseudo-devices implemented as device drivers, or in need to run /configure some package to install the package to have dev/urandom.
Please help (4 Replies)
Discussion started by: rashi
4 Replies
LEARN ABOUT ULTRIX
disktab
disktab(5) File Formats Manual disktab(5)
Name
disktab - disk description file
Syntax
#include <disktab.h>
Description
The file is a simple data base that describes disk geometries and disk partition characteristics. The format is patterned after the termi-
nal data base. Entries in consist of a number of fields separated by colons (:). The first entry for each disk gives the names that are
known for the disk, separated by vertical bars (|). The last name given should be a long name fully identifying the disk.
The following list indicates the normal values stored for each disk entry:
Name Type Description
ns num Number of sectors per track
nt num Number of tracks per cylinder
nc num Total number of cylinders on the disk
ba num Block size for partition `a' (bytes)
bd num Block size for partition `d' (bytes)
be num Block size for partition `e' (bytes)
bf num Block size for partition `f' (bytes)
bg num Block size for partition `g' (bytes)
bh num Block size for partition `h' (bytes)
fa num Fragment size for partition `a' (bytes)
fd num Fragment size for partition `d' (bytes)
fe num Fragment size for partition `e' (bytes)
ff num Fragment size for partition `f' (bytes)
fg num Fragment size for partition `g' (bytes)
fh num Fragment size for partition `h' (bytes)
pa num Size of partition `a' in sectors
pb num Size of partition `b' in sectors
pc num Size of partition `c' in sectors
pd num Size of partition `d' in sectors
pe num Size of partition `e' in sectors
pf num Size of partition `f' in sectors
pg num Size of partition `g' in sectors
ph num Size of partition `h' in sectors
se num Sector size in bytes
ty str Type of disk (e.g. removable, winchester)
The entries can be automatically generated with the program.
Files
See Also
chpt(8), newfs(8)
disktab(5)