Hi,
when installing a piece of third part software I get the error "Bad magic number" at one point when it tries to use libraries from the bea tuxedo server. Am I correct that this means that the software is expecting 32bit while I'm on 64bit? Is there a way around it or can it only be solved... (5 Replies)
I tried rebooting my Sun server just a few minutes ago and I got the following at boot:
--
Sun Fire 280R (UltraSPARC-III+) , No Keyboard
Copyright 1998-2002 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.5, 1024 MB memory installed, Serial #xxxxxxxxx
Ethernet address... (6 Replies)
Dear All,
i have a SCSI hard disk drive i'm installing on it solaris 5 and the workstation is sun sparc, i made an image of this H.D using Norton Ghost 6, so i took off the SCSI H.D from the sun workstation and put it on a Compaq server then i booted the server from the Norton Ghost floppy disk... (0 Replies)
Hello All,
(RHEL4)
Few weeks ago I had posted a message in this forum about the problem I had when I replaced my two scsi disks and tried rebuild raid1 array.
I somehow managed to up the system with working raid1 array.
But the main problem persisted..
i.e when I reboot the system, mounting... (0 Replies)
Hello All,
I m very new to this forum.
i m having SUN NETRA X1 server with 40 GB HDD (Seagate) & 128 MB RAM.
i m trying this server for SUN 10 Practise.
As i m installing SUN 9 /10 with CD ,its giving me error after OK propmt
***************************
#boot cdrom
or
#boot cdrom... (16 Replies)
Hello,
I'm brand new to Sun/Solaris.
I have a Sun Blade 150, with SunOS 5.8.
I wanted to make a backup to prevent future data loss, so I put the disk in a normal PC with Windows XP to try to make a backup with Norton Ghost, the disk was detected, but not the file volume, so I place the disk... (6 Replies)
I'll keep it fairly straight forward. I work with a Solaris server and magically today it decided to take a dump on me. At first it give a long list of files that couldn't be acessed before terminating the boot process and returning to the 'ok' prompt. Booting in single-user mode allowed me to run... (4 Replies)
I have created 1 LUN.
1)LUN 00BB 200GB /dev/rdsk/c1t3d44
/dev/rdsk/c2t28d44
/dev/rdsk/c3t19d44
/dev/rdsk/c4t12d44
2) Already added the new entry into sd.conf and rebooted.
3) Already done these:
powercf –q
power config
4) power display dev=all
I can see the new Symmetrix device.... (1 Reply)
So we have a new to us v240 server with no OS installed. It has an outdated version of OB and ALOM so before we install the OS we want to update both. We have a DVD with the latest OB patch burned on it.
We do the boot cdrom command but receive the Bad Magic Number Error. Does an OS need to... (2 Replies)
Discussion started by: dunkpancakes
2 Replies
LEARN ABOUT DEBIAN
tapset::perf
TAPSET::PERF(3stap)TAPSET::PERF(3stap)NAME
tapset::perf - systemtap perf probe points
DESCRIPTION
This family of probe points is used to probe "perf events" on suitably configured kernels (2.6.33+). It contains a number of aliases for
the ABI-specified event type/config tuples.
The default sampling interval of the translator(1000000) is not overridden, so some of these probe points may fire very infrequently. Use
the lower level perf.type(AA).config(BB).sample(CC) probe point if this is a problem.
perf.hw.*
A variety of hardware events, as generalized by the kernel. These generally require running on bare hardware with selected proces-
sors.
probe perf.hw.cpu_cycles
probe perf.hw.instructions
probe perf.hw.cache_references
probe perf.hw.cache_misses
probe perf.hw.branch_instructions
probe perf.hw.branch_misses
probe perf.hw.bus_cycles
perf.sw.*
Special "software" events provided by the kernel. These sometimes work in virtualized environments and with more processor archi-
tectures.
probe perf.sw.cpu_clock
probe perf.sw.task_clock
probe perf.sw.page_faults
probe perf.sw.context_switches
probe perf.sw.cpu_migrations
probe perf.sw.page_faults_min
probe perf.sw.page_faults_maj
probe perf.sw.alignment_faults
probe perf.sw.emulation_faults
perf.hw_cache.TYPE.ACCESS.RESULT
Hardware cache events, where available. A subset of the following cartesian product may be available:
probe perf.hw_cache.l1d.*.*
probe perf.hw_cache.l1i.*.*
probe perf.hw_cache.ll.*.*
probe perf.hw_cache.dtlb.*.*
probe perf.hw_cache.itlb.*.*
probe perf.hw_cache.bpu.*.*
probe perf.hw_cache.*.read.*
probe perf.hw_cache.*.write.*
probe perf.hw_cache.*.prefetch.*
probe perf.hw_cache.*.*.access
probe perf.hw_cache.*.*.miss
SEE ALSO stap(1), stapprobes(3stap)IBM TAPSET::PERF(3stap)