Hard Drives Undetected on My Machine - But Mounts on All Other Machines Post: 302943989

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Hard drives

Will some one tell me what this means. "warning: ida 0 <slot 6> : command timed out on dev 1/42 blk 4824290 logical unit=0 blocks=5512102, size 2, cmd=0x20." I'm running SCO 505 on a proliant 1600r. Thnank you in advance.

2. Linux

No Hard Drives Have Been Found

I am using an Acer Aspire 4720Z with two partitions C and D. Windows is installed on C and I decided to install Red Hat Linux 9 in partition D. The two partitions are in NTFS file system. During my installation of the the Linux, a prompt was displayed on screen with the message: "No hard drives...

3. Solaris

How do I determine the hard drives in /dev/dsk in OpenSolaris?

I have a Solaris machine running OpenSolaris v5.11. It came with a hard drive. It's called /dev/dsk/c4d0s0. I added two new hard drives into the box. I can't figure out what it's called in /dev/dsk. There are 210 filenames in /dev/dsk. How do I find out which filename corresponds to the...

4. Solaris

formating and repartitioning an external hard drives

Version: solaris 10 x86 I just got a western digital external harddrive formated with fat 32. this drive came with some setup files which is meant for windows or mac. I want to reformat and partition this drive into two ( for solaris and windows) such that the setup files will still be there...

5. Filesystems, Disks and Memory

Help adding new hard drives

Folks; I just added 2 physical new hard drives to my SUSE server. My server is already running SUSE 10.3 version. Is there a command i can use to add the new space or even see if the system can sees them?

6. Solaris

Reinstall old hard drives

I have a T2000 Sun-Fire server. I have 2 sets of drives in a raid 1. Lets call them Set A and Set B. I had Set A installed and working. I needed a new install so I so build up Set B. After some time I wanted to put Set A back in the server. Now the system will not boot off of Set A. I tried to boot...

7. Hardware

Hard Drives and MBR

Hello everyone. I have a question which I may know the answer to, I'm just looking for a confirmation. When it comes to the MBR of a hard drive, i've read in multiple sources that it's always located in the first sector of the hard drive. Is the MBR there from the factory? When I buy a new blank...

8. Solaris

Trying to boot Solaris without hard drives in T5220

I have three Sun Oracle Netra T5220s. I am trying to just get the processor information psrinfo or prtdiag -v from the # prompt in single user mode. I am needing to know the commands to get to boot the CD/DVD of the Solaris OS. I am using it via Serial Port Management. Tinkering around I...

9. Solaris

Solaris 8 - Accessing Hard Drives

Hi, I have two SCSI Hard Drives in a Sun Solaris 8 server as shown below. I would like to access Disk1 and look at its contents, directory structure and files. How do I change my default directory from Disk 0 to Disk 1 and vice versa? Thank you.

10. UNIX for Beginners Questions & Answers

Understanding volumes and hard drives

Ok so i thought i was smart but i can tell I need some help. I am playing around with understanding lvm and adding disks to a linux box. I added a disk and then ran what i thought were commands to add this disk to the box but I think I messed up and would like some help. My question is did i...

LEARN ABOUT FREEBSD

pgmtolispm

pgmtolispm(1)                                                 General Commands Manual                                                pgmtolispm(1)

NAME

       pgmtolispm - convert a portable graymap into Lisp Machine format

SYNOPSIS

       pgmtolispm [pgmfile]

DESCRIPTION

       Reads a portable graymap as input.  Produces a Lisp Machine bitmap as output.

       This is the file format read by the tv:read-bit-array-file function on TI Explorer and Symbolics lisp machines.

       Given a pgm (instead of a pbm) a multi-plane image will be output.  This is probably not useful unless you have a color lisp machine.

       Multi-plane  bitmaps  on  lisp  machines  are color; but the lispm image file format does not include a color map, so we must treat it as a
       graymap instead.  This is unfortunate.

SEE ALSO

       lispmtopgm(1), pgm(5)

BUGS

       Output width is always rounded up to the nearest multiple of 32; this might not always be what you want, but it probably is  (arrays  which
       are not modulo 32 cannot be passed to the Lispm BITBLT function, and thus cannot easily be displayed on the screen).

       No color.

AUTHOR

       Copyright (C) 1991 by Jamie Zawinski and Jef Poskanzer.

                                                                   06 March 1990                                                     pgmtolispm(1)

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Hard drives

Discussion started by: franruiz

2. Linux

No Hard Drives Have Been Found

Discussion started by: tamcomng

3. Solaris

How do I determine the hard drives in /dev/dsk in OpenSolaris?

Discussion started by: sqa777

4. Solaris

formating and repartitioning an external hard drives

Discussion started by: seyiisq