Hello friends, I am trying to communicate with a programmer memory from Unix (HP-UX) via serial port.
Well, I have some code ready stty parameters to achieve communicating the device with the computer, but I have my doubts. I would like to know if you have some code fragment where you use the stty command, something generic for a connection to the serial port.
We're running SCO Unix Openserver 5.05 and I'm having trouble with serial communication between the com2 serial port and a handheld device. Downloading data from Unix to the handheld works perfectly, but the other way around creates a major problem. I don't know whether it's a buffer overflow or... (1 Reply)
Hi,
I am working on serial communication on Unix. Can anyone guide me through it. The steps required for RS 232 communication and can i do serial communication even if i dont have super user previledges.
Thankx,
Vicky (1 Reply)
This isn't really a unix question, or even a programming question, but I hope you guys can help. I want to create a program to control the electricity on a model railway.
I have created the program to that it sends characters over the serial cable, but now I need to do the switch that will... (1 Reply)
I have serial modem connection between two computers. We have to login the remote computer through ip address. How can I get the ip address in this connection? (1 Reply)
hello,
I am gettin problem while sending and recieving data through seial port...
when I am sending Data then the reciever end is not able to recieve that data .....
Reciever end is running in infinite loop just polling after some time to check that there is data on the port and then again... (9 Replies)
Hi again,
I spoke with Keyspan and they assured me the USB to Serial device was working if I could use the Screen tool.
I asked why I was unable to redirect stdin/stdout to and from the /dev/tty. device and was told there was no reason I shouldn't be able to do so.
I have tried:
... (1 Reply)
Hi there
how can i get the result of a command to not give me its error. For example, on certain systems the 'zfs' command below is not available, but this is fine becaues I am testing against $? so i dont want to see the message " command not found" Ive tried outputting to /dev/null 2>&1 to no... (5 Replies)
Hello!
I am working on an application which reads environmental instruments which have serial ports. The application requires a serial port to be present to talk to the device (i.e. /dev/ttyS0 ). In some instances the environmental devices will be 100's of yards away from the computer, so a... (5 Replies)
edit: never mind; mods please delete. I finally got so frustrated I figured it couldn't be the code and it must be the device on the other end. After pulling it out of its cradle, I realized it was a different model number than the one I was using before, and wasn't accepting my... (1 Reply)
Hey, I'm completely new at this and I was wondering if there is a way that I would be able to redirect the log files in a directories standard output and standard error into and excel spreadsheet in anyway?
Please remember don't use too advanced of terminology as I just started using shell... (6 Replies)
Discussion started by: killaram
6 Replies
LEARN ABOUT DEBIAN
statserial
STATSERIAL(1) User Commands STATSERIAL(1)NAME
statserial - display serial port modem status lines
SYNOPSIS
statserial [-n | -d | -x] <device-name>
DESCRIPTION
Statserial displays a table of the signals on a standard 9-pin or 25-pin serial port, and indicates the status of the handshaking lines. It
can be useful for debugging problems with serial ports or modems.
The optional device-name parameter is the full name of the device file for the serial port in question. If not specified, the default is
taken from the environment variable MODEM if set, otherwise /dev/cua1.
COMMAND-LINE OPTIONS
Each of the command line options is mutually exclusive.
-n Normally statserial will loop continuously, updating the status at one second intervals; you can exit using Control-C. The -n option
disables looping.
-d
With this option the status of the modem is printed as a decimal number. The bits are encoded as follows (XXX indicates unused bits):
+---+---+---+---+---+---+---+---+---+
| 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+---+---+---+---+---+---+---+---+---+
|DSR|RI |DCD|CTS|XXX|XXX|RTS|DTR|XXX|
+---+---+---+---+---+---+---+---+---+
-x This option is the same as -d, except that the output is in hexadecimal.
BUGS /LIMITATIONS
Statserial only works with devices that support the TIOCMGET ioctl.
You need permission to read the device file.
The device file may be locked if other applications are using it.
AUTHOR
Statserial was written by Jeff Tranter (Jeff_Tranter@Mitel.COM), later updated by Frank Baumgart (godot@uni-paderborn.de) and is released
under the conditions of the GNU General Public License. See the file COPYING and notes in the source code for details.
SEE ALSO setserial(8)stty(1)
/usr/src/linux/drivers/char/serial.c /usr/include/linux/termios.h
Linux 17 December 1994 STATSERIAL(1)