FDFORMAT(1)						    BSD General Commands Manual 					       FDFORMAT(1)

NAME

     fdformat -- format a floppy diskette

SYNOPSIS

     fdformat [-f device] [-t type] [-n] [-B nbps] [-S nspt] [-T ntrk] [-C ncyl] [-P stepspercyl] [-G gaplen] [-F fillbyte] [-X xfer_rate]
	      [-I interleave]

DESCRIPTION

     The fdformat utility formats a floppy diskette.  With no arguments, it formats the default floppy device with the default density parameters
     (as provided by the floppy diskette device driver).

     As the each track of the floppy diskette is formatted, it is read to verify the format was successful.

     The fdformat utility does not create a filesystem of any kind.  Use tools like newfs(8), newfs_msdos(8), or mformat(1) (part of the
     pkgsrc/sysutils/mtools package) depending on what filesystem type you want to use on the floppy disk to do so.

     Available command-line flags are:
     -f device
	     Format the floppy using device instead of the default /dev/rfd0a.
     -t type
	     Format the floppy using parameters for the diskette named type in /etc/floppytab instead of the device default parameters.
     -n      Do not verify each track as it is read.
     -B nbps
	     Set the number of bytes per sector for the formatted diskette.
     -S nspt
	     Set the number of sectors per track for the formatted diskette.
     -T ntrk
	     Set the number of tracks (heads) per cylinder for the formatted diskette.
     -C ncyl
	     Set the number of cylinders for the formatted diskette.
     -P stepspercyl
	     Set the number of motor steps per cylinder for the formatted diskette.
     -G gaplen
	     Set the sector gap length for the formatted diskette.
     -F fillbyte
	     Set the fill byte for the formatted diskette.
     -X xfer_rate
	     Set the bit transfer rate for the formatted diskette.
     -I interleave
	     Set the interleave factor for the formatted diskette.

SEE ALSO

     fdc(4) (amiga, i386 and sparc ports)

HISTORY

     The fdformat utility appeared in NetBSD 1.3.

BUGS

     Some floppy drive units have physical diskette format sensors which automatically select a diskette density for reading.  Such drives can
     format at alternate densities, but they cannot successfully verify the formatted diskette except at the diskette's normal density.

BSD
								   July 22, 2006							       BSD