04-24-2015
It would suggest that when the server was first installed that someone used a single disk (that would be labelled hdisk0) and the when complete they ran a mirrorvg rootvg only. There are more steps required to make it a usable mirror, namely running bosboot and setting the bootlist
Within SMS, can you choose your boot disk and enquire what is on each disk? I can't remember how right now and all my servers are running, so I can't just bounce one. I think you need to ask it to scan all devices, and it might take a while depending on your configuration.
If it sees your disk has a bootable AIX, try selecting it. That would suggest that just the bootlist is incorrect.
If SMS doesn't think that your disk has, all may not be lost, but it might be a little difficult. When in single user off media (tape / CD / DVD / or NIM) maybe you could try running the bosboot command against the correct disk? You may need to get this from the serial number.
It still may not work, but nothing else springs to mind at the moment without restoring from mksysb which I presume you don't want to do.
Robin
10 More Discussions You Might Find Interesting
1. HP-UX
Hello again,
We need to install patches to HP-UX B.11.11 but would like to break the mirror it has (with out damaging it) so that in case of failure we can use this a meassure procedure.
Any ideas on how to do this
Thank you! (2 Replies)
Discussion started by: AQG
2 Replies
2. Solaris
Hi All,
How do you know if you need to break the mirror on solaris 8 patch update?
Here's the patch example, 117350-54. On the site, it's just a low type update and not a medium or critical.
Is breaking a mirror a best practice only or really a requirement to some patch?
Thanks,
itik (1 Reply)
Discussion started by: itik
1 Replies
3. Solaris
Hi All,
How do I break the solaris 8 mirror? And how do I make sure I will point the first hd mirror on reboot.
If the first break mirror won't boot. How do I make the copy mirror to boot?
Thanks in advance,
itik (2 Replies)
Discussion started by: itik
2 Replies
4. AIX
Hello
I have a question
I have a box with Aix 5.3 with rootvg on mirror.
I deleted a filesystem and I create a new one to install some software but when I type lsvg -l rootvg all my filesystems has mirror unless the new one.
My question is I can mirror this fs only ??? or I have to... (9 Replies)
Discussion started by: lo-lp-kl
9 Replies
5. AIX
We are considering a DR strategy of booting AIX 5.3 and 5.3 logical partitions from EMC Symmetrix SAN disks, so that we can replicate via SRDF to a recovery site. Has anyone tried configuring AIX 5.x systems to boot from SAN disk? If so, can you provide any information on the pros and cons of... (6 Replies)
Discussion started by: jjgarrot
6 Replies
6. AIX
Guys,
In my AIX 6.1 box the rootvg was on hdisk2, I tried to migrated it to hdisk0
Added hisk0 to rootvg , mirrored rootvg and changed bootlist and and sucessfully rebooted from hdisk0
Now I tried to remove the hdisk2 from rootvg so breaked mirror
-bash-3.00# unmirrorvg rootvg hdisk2... (3 Replies)
Discussion started by: kkeng808
3 Replies
7. AIX
Hello all,
I need help for erasing IBM P5 machine running AIX 5.3.
I have 2 system disks (Hardware mirror) and i'm looking for a way like a LIVE CD bootable CD so I can boot with the cd and then format the system disks with a "secure erase" software. (7 Replies)
Discussion started by: kobi gabai
7 Replies
8. Solaris
Hello:
I have a machine built on 2 drives and mirrors have been created to a second set of 2 drives (4 total) on the same platform. SVM.
Might anyone provide guidance to create a second machine by breaking the mirrored set, moving the two mirrors (2) to another machine (same platform type),... (1 Reply)
Discussion started by: 4dailyrunner
1 Replies
9. AIX
Hello,
Few days ago I created both mksysb and savevg archives of rootvg.
How can I restore this rootvg now because the AIX crashed during some software tests. There is no way to start from hdisk0 because most of the system files are deleted (this includes libc.a).
I tough it will be trivial... (6 Replies)
Discussion started by: +Yan
6 Replies
10. Linux
Hi Guys,
I have a mirrored LVM volume, and wish to break the mirror leaving only copy1 (effectively removing copy 0).
Here's the config:
# lvs -a -o +devices
lvdata vg01 mwi-ao 2.19T lvdata_mlog 100.00 lvdata_mimage_0(0),lvdata_mimage_1(0)
vg01... (0 Replies)
Discussion started by: badoshi
0 Replies
LEARN ABOUT DEBIAN
tgtimg
TGTIMG(8) TGTIMG(8)
NAME
tgtimg - Linux SCSI Target Framework Image File Utility
SYNOPSIS
tgtimg [-o --op <operation>] [-Y --device-type <device-type>] [-b --barcode <barcode>] [-s --size <size>] [-t --type <media-type>]
[-f --file <path>]
tgtimg --help
DESCRIPTION
Tgtimg is a utility to create and manage the image files used by the TGTD device emulation.
This command is used to initialize device image files with the additional metadata, such as barcode, list of blocks, total size, etc that
the TGTD emulation needs.
OPTIONS
-h, --help
Show a help screen and exit.
-o, --op {new|show}
Operation. Is either new to create a new image file or show to show the content of an existing image file.
-Y, --device-type <type>
This specifies the type of image file.
Supported device types are :
cd : to create media for a dvd device
disk : to create media for a disk device
tape : to create media for a tape device
-t, --type <media-type>
When creating a new image, this specifies the type of media to emulate. The available mediatypes depend on the type of the device.
Supported media types for cd devices are :
dvd+r : create a blank writeable DVD+R disk
Supported media types for disk devices are :
disk : create an empty disk
Supported media types for tape devices are :
data : create a normal data tape
clean : create a cleaning tape
worm : create a worm
-b, --barcode <barcode>
When creating a new image, this argument specifies the barcode to use with this image file. Backup application software often uses
barcodes to identify specific tapes. When emulating a VTL, make sure that all tape images use unique barcodes.
-s, --size <size>
When creating a new image, this specifies the size in megabytes for the virtual tape image.
-f, --file <path>
The filename of the image file.
EXAMPLES
To create a new 100MByte disk
tgtimg --op new --device-type disk --type disk --size 100 --file /data/hd001.raw
To create a new tape image
tgtimg --op new --device-type tape --barcode 12345 --size 100 --type data --file /data/tape001.img
To view the content of an existing image
tgtimg --op show --device-type tape --file /data/tape001.img
To create a new blank DVD+R image
tgtimg --op new --device-type cd --type dvd+r --file /data/dvd001.iso
SEE ALSO
tgtd(8), tgtadm(8), tgt-admin(8), tgt-setup-lun(8). http://stgt.sourceforge.net/
REPORTING BUGS
Report bugs to <stgt@vger.kernel.org>
04/04/2010 TGTIMG(8)