Sponsored Content
Operating Systems Solaris Solaris 11.2 on Supermicro X10SL7-F with LSI SAS 2308 Post 302941018 by tubiman on Saturday 11th of April 2015 04:35:28 AM
Old 04-11-2015
Oracle Solaris 11.2 on Supermicro X10SL7-F with LSI SAS 2308

Hi,

I am planning on building a Solaris 11.2 based ZFS file server. The hardware I have chosen is the following:

Mobo: Supermicro X10SL7-F (with integrated 'LSI SAS 2308' controller)
CPU: Intel i3-4150
RAM: 16GB ECC (brand/model is certified by Supermicro)


# I will flash the integrated 'LSI SAS 2308' controller to 'IT mode' using the LSI firmware version P19 (since vesion P20 is known to have bugs), filename to be used: PH19-IT.zip.

# I will do a 'bare metal' install of Solaris 11.2 (NO virtual machine, no passthrough etc).

My questions are:

#1. Are there any known issues with the 'Supermicro X10SL7-F' when running Solaris 11.2 ?

#2. Is the 'LSI SAS 2308' controller (in IT mode, using firmware version P19) fully supported (and working without any problems) in Solaris 11.2 ?

I have seen in the Solaris 11.2 Hardware compatibility List (HCL) that the 'LSI 9207-8e HBA' is certified and since this HBA uses the 'LSI SAS 2308' controller (same as my planned mobo) I think it should work, but I am asking just to be sure.

If I have to take any other actions than the above mentioned to get this hardware working in Solaris 11.2, please feel free to enlighten me.

Hope that someone can answer my questions.

Thank you very much!

BR,
tubiman
 

8 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

SAS Tuning

Does anyone had perfomed a tuning with SAS on Solaris??? Performance is not so good and I found out that Share Memory an Semaphores are the same that initial instalation, I havent found info at internet Please help (1 Reply)
Discussion started by: alex blanco
1 Replies

2. Solaris

SAS Setup

Hi, I have a solaris box with an LSI SAS HBA and a16 bay SAS JBOD. I can only see 15 of the 16 drives, ID 7 is not seen. Do I have to edit the st.conf file to get things to work properly? Thanks (0 Replies)
Discussion started by: montanye
0 Replies

3. Solaris

Install Solaris 10 with an internal StorageTek SAS HBA Raid card

Hi all i would like to ask some suggests about my next job! I have to install a new Sun Netra T5220, with an additional internal StorageTek SAS HBA Raid. The problem come in if every disk is now controlled by the HBA, how can I install the OS? No disk is being detected by the OS. SAS card... (2 Replies)
Discussion started by: kakabobo
2 Replies

4. Solaris

installing solaris with StorageTek SAS RAID Internal HBA

i was given a task which needs to perform a raid 1 on the boot disk, and 4 other disks on raid 10. Is there any other alternative in installing solaris 10 other than through network installation?will be using solaris update 6. while reading through the user guide i got pretty confuse. ... (1 Reply)
Discussion started by: monstar1407
1 Replies

5. Linux

Supermicro(dual core) server getting rebooted after "decompressing the kernel;booting the kernel" me

supermicro(dual core) server getting rebooted after "decompressing the kernel;booting the kernel" message comes. I tried giving acpi=off to the kernel command line but same problem.It shows everything ok and no problem with memory and processors and power supplies.Wt could be the reason? It has... (1 Reply)
Discussion started by: pankajd
1 Replies

6. SCO

Boot hang after relocate of LSI HBA controller

Hi folks, I had problems trying to install SCO OpenServer 6 on a PC with no floppy drive and a SATA CD drive. Eventually after advice received on this forum last week, I adopted a different approach by fitting the LSI HBA RAID adapter and associated disks into an older PC that does have CD and... (4 Replies)
Discussion started by: millosman
4 Replies

7. Solaris

SAS drive USB caddy on Solaris V440

Got a T2000 which has got the 2.5" SAS drives. Want to be able, if I can, to connect to USB caddy and connect to a V440. Anyone ever tried this? To be honest, having problems even finding a SAS-USB caddy. (0 Replies)
Discussion started by: psychocandy
0 Replies

8. Linux

My first SAS..a simple question.

I bought for backup this controller LSI LSI9212-4i4e 6G SAS I will buy a quantum reader like this Quantum TC-L62BN-EM 2500GB LTO Two simple question a)I read..2500GB,this mean i cannot use tape lto6 over 3tb? b)Wich external cable?A sata external cable is good? Thanks (0 Replies)
Discussion started by: Linusolaradm1
0 Replies
MPT(4)							   BSD Kernel Interfaces Manual 						    MPT(4)

NAME
mpt -- LSI Fusion-MPT SCSI/Fibre Channel driver SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device scbus device mpt Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): mpt_load="YES" DESCRIPTION
The mpt driver provides support for the LSI Logic Fusion-MPT family of SCSI, Fibre Channel and SAS controllers. HARDWARE
The following controllers are supported by the mpt driver: o LSI Logic 53c1030, LSI Logic LSI2x320-X (Single and Dual Ultra320 SCSI) o LSI Logic AS1064, LSI Logic AS1068 (SAS/SATA) o LSI Logic FC909 (1Gb/s Fibre Channel) o LSI Logic FC909A (Dual 1Gb/s Fibre Channel) o LSI Logic FC919, LSI Logic 7102XP-LC (Single 2Gb/s Fibre Channel) o LSI Logic FC929, LSI Logic FC929X, LSI Logic 7202XP-LC (Dual 2Gb/s Fibre Channel) o LSI Logic FC949X (Dual 4Gb/s Fibre Channel) o LSI Logic FC949E, LSI Logic FC949ES (Dual 4Gb/s Fibre Channel PCI-Express) The Ultra 320 SCSI controller chips supported by the mpt driver can be found onboard on many systems including: o Dell PowerEdge 1750 thru 2850 o IBM eServer xSeries 335 These systems also contain Integrated Raid Mirroring and Integrated Raid Mirroring Enhanced which this driver also supports. The SAS controller chips are also present on many new AMD/Opteron based systems, like the Sun 4100. Note that this controller can drive both SAS and SATA drives or a mix of them at the same time. The Integrated Raid Mirroring available for these controllers is poorly supported at best. The Fibre Channel controller chipset are supported by a broad variety of speeds and systems. The Apple Fibre Channel HBA is in fact the FC949ES card. This driver also supports target mode for Fibre Channel cards. This support may be enabled by setting the desired role of the core via the LSI Logic firmware utility that establishes what roles the card can take on - no separate compilation is required. SEE ALSO
cd(4), ch(4), da(4), pci(4), sa(4), scsi(4), targ(4), mptutil(8), gmultipath(8) LSI Logic Website, http://www.lsilogic.com/. HISTORY
The mpt driver first appeared in FreeBSD 4.6. AUTHORS
The mpt driver was originally written for FreeBSD by Greg Ansley and marginally improved upon by Matt Jacob <mjacob@FreeBSD.org>. Justin Gibbs <gibbs@FreeBSD.org> and Scott Long <scottl@FreeBSD.org> have made more substantial improvements. BUGS
BSD
May 13, 2010 BSD
All times are GMT -4. The time now is 06:18 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy