I wanted to put "|" this sign at starting and at end of every field but its not working with first field like
Currently the out put is :
abc | abc | abc |
xyz | xyz | xyz |
But I want the out put in this form:
| abc | abc | abc |
| xyz | xyz | xyz |
plz help me. (2 Replies)
Hi,
I have a script in which an entry like this .....
FILENAME_B="PIC_${DATE}0732*.JPG"
The script connects to an ATM and pull a pic file from it.The format for the file is like PIC_2008061400000001.JPG in the ATM.
Means 1st 8 digit is the date(YYYYMMDD) field
2nd 8 digit means hrs... (2 Replies)
hi
i am running script which contains the commmnds and i am redirecting the script output to a file.
like
./script 1> result.txt 2>&1
the above redirection is not working for commands when run in background in a script.
but the problem here result.txt containg output which is repeated.... (3 Replies)
Below is the my cide which is working fine but I am not getting the output indesired format.there is some problem in alignment.Can someone help me to correct this?
if ];
then
summary=$(
echo -e "Please review the log file of auto coloclean utility.\n";
echo -e... (2 Replies)
currently I have process from a raw file to this stage
ALTER TABLE "EXCEL_ADMIN"."TC_TXN_VOID" ADD CONSTRAINT "PK_TC_TXN_VOID" PRIMARY KEY ("TC_TXN_IID")
ALTER TABLE "EXCEL_ADMIN"."TC_TXN_AMT" ADD CONSTRAINT "PK_TC_TXN_AMT" PRIMARY KEY ("TC_TXN_AMT_IID")
ALTER TABLE... (10 Replies)
Hi,
I am unable to get beyond the exit function. The shell script is used to look for masked files and copy paste them to another location. Please refer to the code below for more information.
Thanks
Brinjit
#!/usr/bin/ksh... (10 Replies)
Am in need of your help to get the desired output.
nameSECURITY.SERVICES.CONFIG:GETVALUEisPrefetchedNsAccessLast2013-09-13 10:50:13 MESTsAccessTotal1sRunningcHitLastnamePUBLIC.SERVER:INVOKEisPrefetchedNsAccessLast2013-09-17 15:02:05... (5 Replies)
I am searching for a process that should be up and running. Im using the following command
ps -ef | grep elasticsearch
to get
elastic+ 1673 1 0 Jan29 ? 05:08:56 /bin/java -Xms4g -Xmx4g -Djava.awt.headless=true -XX:+UseParNewGC -XX:+UseConcMarkSweepGC... (1 Reply)
Hi,
I'm trying to filter the following output to only display information about an alarm where the Status: corresponds to Set.
--------------------------------------------------------
Description: hw_optics: RX POWER LANE-0 LOW ALARM
Location: Optics0/0/0/21... (6 Replies)
Discussion started by: sand1234
6 Replies
LEARN ABOUT DEBIAN
rlm_ippool_tool
RLM_IPPOOL_TOOL(8) System Manager's Manual RLM_IPPOOL_TOOL(8)NAME
rlm_ippool_tool - dump the contents of the FreeRadius ippool database files
SYNOPSIS
If an ipaddress is specified then that address is used to limit the actions or output.
rlm_ippool_tool [-a] [-c] [-o] [-v] session-db index-db [ipaddress]
Mark the entry nasIP/nasPort as having ipaddress
rlm_ippool_tool -n session-db index-db ipaddress nasIP nasPort
Update old format database to new.
rlm_ippool_tool -u session-db new-session-db
DESCRIPTION
rlm_ippool_tool dumps the contents of the FreeRADIUS ippool databases for analyses or for removal of active (stuck?) entries.
Or with the -n argument adds a usage entry to the FreeRADIUS ippool databases.
OPTIONS -a Print all active entries.
-c Report number of active entries.
-r Remove active entries.
-v Verbose report of all entries.
-o Assume old database format (nas/port pair, not md5 output).
-n Mark the entry nasIP/nasPort as having ipaddress.
-u Update old format database to new.
EXAMPLES
Given the syntax in the FreeRadius radiusd.conf:
ippool myippool {
range-start = 192.168.1.0
range-stop = 192.168.1.255
[...]
session-db = ${raddbdir}/ip-pool.db
ip-index = ${raddbdir}/ip-index.db
}
To see the number of active entries in this pool, use:
$ rlm_ippool_tool -c ip-pool.db ip-index.db
13
To see all active entries in this pool, use:
$ rlm_ippool_tool -a ip-pool.db ip-index.db
192.168.1.5
192.168.1.82
192.168.1.244
192.168.1.57
192.168.1.120
192.168.1.27
[...]
To see all information about the active entries in the use, use:
$ rlm_ippool_tool -av ip-pool.db ip-index.db
NAS:172.16.1.1 port:0x2e8 - ipaddr:192.168.1.5 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x17c - ipaddr:192.168.1.82 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x106 - ipaddr:192.168.1.244 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x157 - ipaddr:192.168.1.57 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x2d8 - ipaddr:192.168.1.120 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x162 - ipaddr:192.168.1.27 active:1 cli:0 num:1
[...]
To see only information of one entry, use:
$ rlm_ippool_tool -v ip-pool.db ip-index.db 192.168.1.1
NAS:172.16.1.1 port:0x90 - ipaddr:192.168.1.1 active:0 cli:0 num:0
To add an IP address usage entry, use:
$ rlm_ippool_tool -n ip-pool.db ip-index.db 192.168.1.1 172.16.1.1 0x90
rlm_ippool_tool: Allocating ip to nas/port: 172.16.1.1/144
rlm_ippool_tool: num: 1
rlm_ippool_tool: Allocated ip 192.168.1.1 to client on nas 172.16.1.1,port 144
SEE ALSO radiusd(8)AUTHORS
Currently part of the FreeRADIUS Project (http://www.freeradius.org) Originally by Edwin Groothuis, edwin@mavetju.org
(http://www.mavetju.org)
Mailing list details are at http://www.freeradius.org/
RLM_IPPOOL_TOOL(8)