I am getting error in a shell script having a simple date command.
Error is " write to 1 failed [No space left on device] ".
We saw that /tmp folder was 100% full. When we cleared some space in /tmp folder then script worked fine. Why does date command(or any other command) require space in /tmp folder? Which settings define this? Any information on this is appreciated.
I am trying to create new files under my directory...but i getting the following message...
cat: write error: No space left on device
How do we handle this error.
I am not getting this error when I login as the super user (3 Replies)
hello all,
i have a proc binary that we run on unix environment, and it is generating this error
'' tstfile(): No space left on device ''
can you please assist on how to narrow down the problem?
thanks (4 Replies)
hi guys, me again ;)
i recently opened a thread about physical to zone migration.
My zone is mounted over a "bigger" LUN (500GB) and step is now to move the old files, from the physical server, to my zone.
We are talking about 22mio of files.
i used rsync to do that and every time at... (8 Replies)
Hi All,
This is Sandeep Gupta,
I am facing a problem with sudo command.
Whenever i am executing the command "visudo" i am getting the error "visudo: write error: No space left on device".
but i have checked on my Solaris Box everything is ok, i have enough free space on my box, and also... (13 Replies)
Hi,
We are trying to sort the 40GB file in unix and getting following error.
Error:
sort: can't write /var/tmp/stmAAAvsaGfJ.00002929: No space left on device
sort -t ',' -k4 $DIR/INF_ff_FULL.dat >>$DIR/Sort_INF_ff_FULL.dat; 2>$DIR/sort_error.log
Can you please advise how to... (2 Replies)
Hello people
I have a small fileserver running busybox (very small linux distro with most essential stuff on it) and I am trying to remove some unused directories on it.
When I try this:
rm -R test/I get:
rm: cannot remove 'test': No space left on devicedf shows:
Filesystem ... (8 Replies)
Hello,
I want to install GCC gcc-4.8.1-2.src.rpm for AIX 6.1
when I lance my command rpm -i gcc-4.8.1-2.src.rpm
I have this error
unpacking of archive failed on file gcc-4.8.1.tar.bz2: cpio: copy failed - No space left on device
I checked the free space and I am surpise becouse I have... (7 Replies)
Hi ,
In file first line start with "",when trying to remove using sed i am getting the below error .Please advise
sed -e 's///g' -e 's/$]//g' segment1.txt >>segment_m1
sed: couldn't write 1378 items to stdout: No space left on device
Thanks,
Mohan (1 Reply)
Hello all
posting here after scanning the net and tried most of the things offered
still no solution that worked
when I do :
$ df -h
Filesystem Size Used Avail Use% Mounted on
footmpfs 7.9G 60K 7.9G 1% /dev
tmpfs 7.9G 0 7.9G 0% /dev/shm
/dev/da1 ... (3 Replies)
Running a installation on Solaris 11 and getting error write to 1 failed
If anyone can advise ?
ORIGINAL_PATH="${PATH}"
# prepend /usr/xpg4/bin to PATH as needed
temporaryPath=`expr "${PATH}:" : '\(/usr/xpg4/bin:\)'`
if
then
PATH="/usr/xpg4/bin:${PATH}"
seem to have... (6 Replies)
Discussion started by: Mpumi
6 Replies
LEARN ABOUT OSF1
next
next(1) General Commands Manual next(1)NAME
next - show the next message (only available within the message handling system, mh)
SYNOPSIS
next [+foldername] [-[no]header] [-help] [-showproc program] [-noshowproc] [options to showproc]
OPTIONS
Displays a one-line header before the message. The header consists of the name of the folder and the message number. This is the default
behavior. It can be suppressed with the -noheader option. Prints a list of the valid options to this command. Specifies an alternative
program to list messages. The default is to use the program defined by the showproc: entry in the file. As with show, you can give options
to the showproc program at the command line. These are passed directly to showproc by next. (If you specify an option that has a numerical
value, leave no space between the argument and the value. See RESTRICTIONS for more information.)
The defaults for this command are:
+folder defaults to the current folder -header
DESCRIPTION
The command next displays the next message in the current folder. The next message is the one after the current message in the folder. The
message that is shown becomes the current message.
If you name a folder using the +folder argument, next displays the next message in the folder you specify. That folder becomes the current
folder.
RESTRICTIONS
The next command is really a link to the show program. As a result, if you make a link to next and that link is not called next, your link
will act like show instead. To avoid this, add a profile-entry for the link to your and add the argument next to the entry.
Also, if you use the showproc switch to specify an alternative viewer, leave no space between the options specified with the viewer and
their values. For example, if you want to use the more command to scroll through messages in your inbox folder, and you want to pause every
five lines, you would enter the following command, where there is no space between the option n and the value 5: % next +inbox -showproc
more -n5
If there is space between the option n and the value 5, the command interprets 5 as a message number to view.
PROFILE COMPONENTS
Path: To determine the user's Mail directory
showproc: Program to show the message
FILES
The user profile.
SEE ALSO show(1), prev(1), mh_profile(4)next(1)