I am getting error in a shell script having a simple date command.
Error is " write to 1 failed [No space left on device] ".
We saw that /tmp folder was 100% full. When we cleared some space in /tmp folder then script worked fine. Why does date command(or any other command) require space in /tmp folder? Which settings define this? Any information on this is appreciated.
I am trying to create new files under my directory...but i getting the following message...
cat: write error: No space left on device
How do we handle this error.
I am not getting this error when I login as the super user (3 Replies)
hello all,
i have a proc binary that we run on unix environment, and it is generating this error
'' tstfile(): No space left on device ''
can you please assist on how to narrow down the problem?
thanks (4 Replies)
hi guys, me again ;)
i recently opened a thread about physical to zone migration.
My zone is mounted over a "bigger" LUN (500GB) and step is now to move the old files, from the physical server, to my zone.
We are talking about 22mio of files.
i used rsync to do that and every time at... (8 Replies)
Hi All,
This is Sandeep Gupta,
I am facing a problem with sudo command.
Whenever i am executing the command "visudo" i am getting the error "visudo: write error: No space left on device".
but i have checked on my Solaris Box everything is ok, i have enough free space on my box, and also... (13 Replies)
Hi,
We are trying to sort the 40GB file in unix and getting following error.
Error:
sort: can't write /var/tmp/stmAAAvsaGfJ.00002929: No space left on device
sort -t ',' -k4 $DIR/INF_ff_FULL.dat >>$DIR/Sort_INF_ff_FULL.dat; 2>$DIR/sort_error.log
Can you please advise how to... (2 Replies)
Hello people
I have a small fileserver running busybox (very small linux distro with most essential stuff on it) and I am trying to remove some unused directories on it.
When I try this:
rm -R test/I get:
rm: cannot remove 'test': No space left on devicedf shows:
Filesystem ... (8 Replies)
Hello,
I want to install GCC gcc-4.8.1-2.src.rpm for AIX 6.1
when I lance my command rpm -i gcc-4.8.1-2.src.rpm
I have this error
unpacking of archive failed on file gcc-4.8.1.tar.bz2: cpio: copy failed - No space left on device
I checked the free space and I am surpise becouse I have... (7 Replies)
Hi ,
In file first line start with "",when trying to remove using sed i am getting the below error .Please advise
sed -e 's///g' -e 's/$]//g' segment1.txt >>segment_m1
sed: couldn't write 1378 items to stdout: No space left on device
Thanks,
Mohan (1 Reply)
Hello all
posting here after scanning the net and tried most of the things offered
still no solution that worked
when I do :
$ df -h
Filesystem Size Used Avail Use% Mounted on
footmpfs 7.9G 60K 7.9G 1% /dev
tmpfs 7.9G 0 7.9G 0% /dev/shm
/dev/da1 ... (3 Replies)
Running a installation on Solaris 11 and getting error write to 1 failed
If anyone can advise ?
ORIGINAL_PATH="${PATH}"
# prepend /usr/xpg4/bin to PATH as needed
temporaryPath=`expr "${PATH}:" : '\(/usr/xpg4/bin:\)'`
if
then
PATH="/usr/xpg4/bin:${PATH}"
seem to have... (6 Replies)
Discussion started by: Mpumi
6 Replies
LEARN ABOUT SUNOS
return
exit(1) User Commands exit(1)NAME
exit, return, goto - shell built-in functions to enable the execution of the shell to advance beyond its sequence of steps
SYNOPSIS
sh
exit [n]
return [n]
csh
exit [ ( expr )]
goto label
ksh
*exit [n]
*return [n]
DESCRIPTION
sh
exit will cause the calling shell or shell script to exit with the exit status specified by n. If n is omitted the exit status is that of
the last command executed (an EOF will also cause the shell to exit.)
return causes a function to exit with the return value specified by n. If n is omitted, the return status is that of the last command exe-
cuted.
csh
exit will cause the calling shell or shell script to exit, either with the value of the status variable or with the value specified by the
expression expr.
The goto built-in uses a specified label as a search string amongst commands. The shell rewinds its input as much as possible and searches
for a line of the form label: possibly preceded by space or tab characters. Execution continues after the indicated line. It is an error to
jump to a label that occurs between a while or for built-in command and its corresponding end.
ksh
exit will cause the calling shell or shell script to exit with the exit status specified by n. The value will be the least significant 8
bits of the specified status. If n is omitted then the exit status is that of the last command executed. When exit occurs when executing
a trap, the last command refers to the command that executed before the trap was invoked. An end-of-file will also cause the shell to exit
except for a shell which has the ignoreeof option (See set below) turned on.
return causes a shell function or '.' script to return to the invoking script with the return status specified by n. The value will be the
least significant 8 bits of the specified status. If n is omitted then the return status is that of the last command executed. If return
is invoked while not in a function or a '.' script, then it is the same as an exit.
On this man page, ksh(1) commands that are preceded by one or two * (asterisks) are treated specially in the following ways:
1. Variable assignment lists preceding the command remain in effect when the command completes.
2. I/O redirections are processed after variable assignments.
3. Errors cause a script that contains them to abort.
4. Words, following a command preceded by ** that are in the format of a variable assignment, are expanded with the same rules as a vari-
able assignment. This means that tilde substitution is performed after the = sign and word splitting and file name generation are not
performed.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO break(1), csh(1), ksh(1), sh(1), attributes(5)SunOS 5.10 15 Apr 1994 exit(1)