you have to write routing table. look at smitty mkroute
I have tried manually
Setting ip for wpar
Then add route
192.168.0.44 is the address of host wpar
i tried also 192.168.0.1 wich is the router but
doesn't work,the ping for 192.168.0.0/24 are dropped
and outside(4.4.4.4 or any internet address) said "network unreachable"
Where is wrong?
Hello,
We have an old Axil running SunOS Release 5.5.1. Recently, we updated our network, so the gateway and domain changed. Our network admin forgot (or didn't know) that we had this machine on the network, so it quietly lost its mind.
Now we are trying to add it back to the network. He... (5 Replies)
Hi,
I have a shared AIX wpar configured.
I have started snmpd process on shared AIX wpar.
But when i tried to query a MIB id using the following command
/opt/OV/bin/snmpget -d -v 1 -c public -p <hostname> .1.3.6.1.2.1.1.7.0
i get the following error message
#... (0 Replies)
Hello,
We have a system running AIX 6.1.7.1. We have created a Workload Partition(wpar) on this system with wpar specific routing enabled.
On wpar, we are running DNS (UDP/53) and syslog (UDP/514).
en0: 1.1.1.1/255.255.255.0 NOT assigned to any wpar
en1:... (0 Replies)
seems to be WPAR is quite easy to set up..without additional licenses..
If I don't need Linux and all my legacy and new apps are happy in AIX 7.1 (the latest OS), I could save all troubles and use WPAR.
Can someone comment on this ??
One copy of OS to maintain, so to speak..
... (4 Replies)
Hi All,
This is for WPAR monitoring shell script, earlier opened thread was closed, had to open a new thread, as suggested I have used script as below, But am trying to get the output in below format, need suggestions with it. Below is the lswpar output, required output format.
... (7 Replies)
Anyone running CICS TX in a WPAR ?
In my attempts to run CICS TX 5.1.0.1 in a WPAR..... CICS fails to start due to unable to load a CICS IPC Kernel Extension. The Kernel Extension is 64 bit (so not a 32 vs 64 bit issue).
Base system/LPAR is Power8 and AIX 7.1 TL3 SP5. WPAR is versioned... (4 Replies)
AIX 7.1
New to WPAR, hopefully just missing something simple here.
Creating the WPAR like this.....
(The box where the WPAR is hosted does have an iscsi protocol device)
mkwpar -h wpar08 -l -n wpar08 -N interface=en0 address=xxx.xx.xx.xxx netmask=255.255.255.0 -D devname=/dev/iscsi0 -D... (0 Replies)
I have this error when I'm trying to do clogin from AIX 7200-00-00-0000 into a wpar with AIX 5.2
abanksPaDesa2:/> clogin AbanksBDPA_wpar
exec: A file or directory in the path name does not exist
somebody can help me to fix this? I'm restoring the wpar from wpar mksysb not a mksysb from... (2 Replies)
Discussion started by: sandra25350
2 Replies
LEARN ABOUT PLAN9
netmasks
netmasks(4) File Formats netmasks(4)NAME
netmasks - network mask database
SYNOPSIS
/etc/inet/netmasks
/etc/netmasks
DESCRIPTION
The netmasks file contains network masks used to implement IP subnetting. It supports both standard subnetting as specified in RFC-950 and
variable length subnetting as specified in RFC-1519. When using standard subnetting there should be a single line for each network that is
subnetted in this file with the network number, any number of SPACE or TAB characters, and the network mask to use on that network. Network
numbers and masks may be specified in the conventional IP `.' (dot) notation (like IP host addresses, but with zeroes for the host part).
For example,
128.32.0.0 255.255.255.0
can be used to specify that the Class B network 128.32.0.0 should have eight bits of subnet field and eight bits of host field, in addition
to the standard sixteen bits in the network field.
When using variable length subnetting, the format is identical. However, there should be a line for each subnet with the first field being
the subnet and the second field being the netmask that applies to that subnet. The users of the database, such as ifconfig(1M), perform a
lookup to find the longest possible matching mask. It is possible to combine the RFC-950 and RFC-1519 form of subnet masks in the net-
masks file. For example,
128.32.0.0 255.255.255.0
128.32.27.0 255.255.255.240
128.32.27.16 255.255.255.240
128.32.27.32 255.255.255.240
128.32.27.48 255.255.255.240
128.32.27.64 255.255.255.240
128.32.27.80 255.255.255.240
128.32.27.96 255.255.255.240
128.32.27.112 255.255.255.240
128.32.27.128 255.255.255.240
128.32.27.144 255.255.255.240
128.32.27.160 255.255.255.240
128.32.27.176 255.255.255.240
128.32.27.192 255.255.255.240
128.32.27.208 255.255.255.240
128.32.27.224 255.255.255.240
128.32.27.240 255.255.255.240
128.32.64.0 255.255.255.192
can be used to specify different netmasks in different parts of the 128.32.0.0 Class B network number. Addresses 128.32.27.0 through
128.32.27.255 have a subnet mask with 28 bits in the combined network and subnet fields (often referred to as the subnet field) and 4 bits
in the host field. Furthermore, addresses 128.32.64.0 through 128.32.64.63 have a 26 bits in the subnet field. Finally, all other
addresses in the range 128.32.0.0 through 128.32.255.255 have a 24 bit subnet field.
Invalid entries are ignored.
SEE ALSO ifconfig(1M), inet(7P)
Postel, Jon, and Mogul, Jeff, Internet Standard Subnetting Procedure, RFC 950, Network Information Center, SRI International, Menlo Park,
Calif., August 1985.
V. Fuller, T. Li, J. Yu, K. Varadhan, Classless Inter-Domain Routing (CIDR): an Address Assignment and Aggregation Strategy, RFC 1519,
Network Information Center, SRI International, Menlo Park, Calif., September 1993.
T. Pummill, B. Manning, Variable Length Subnet Table For IPv4, RFC 1878, Network Information Center, SRI International, Menlo Park, Calif.,
December 1995.
NOTES
/etc/inet/netmasks is the official SVr4 name of the netmasks file. The symbolic link /etc/netmasks exists for BSD compatibility.
SunOS 5.10 7 Jan 1997 netmasks(4)