you have to write routing table. look at smitty mkroute
I have tried manually
Setting ip for wpar
Then add route
192.168.0.44 is the address of host wpar
i tried also 192.168.0.1 wich is the router but
doesn't work,the ping for 192.168.0.0/24 are dropped
and outside(4.4.4.4 or any internet address) said "network unreachable"
Where is wrong?
Hello,
We have an old Axil running SunOS Release 5.5.1. Recently, we updated our network, so the gateway and domain changed. Our network admin forgot (or didn't know) that we had this machine on the network, so it quietly lost its mind.
Now we are trying to add it back to the network. He... (5 Replies)
Hi,
I have a shared AIX wpar configured.
I have started snmpd process on shared AIX wpar.
But when i tried to query a MIB id using the following command
/opt/OV/bin/snmpget -d -v 1 -c public -p <hostname> .1.3.6.1.2.1.1.7.0
i get the following error message
#... (0 Replies)
Hello,
We have a system running AIX 6.1.7.1. We have created a Workload Partition(wpar) on this system with wpar specific routing enabled.
On wpar, we are running DNS (UDP/53) and syslog (UDP/514).
en0: 1.1.1.1/255.255.255.0 NOT assigned to any wpar
en1:... (0 Replies)
seems to be WPAR is quite easy to set up..without additional licenses..
If I don't need Linux and all my legacy and new apps are happy in AIX 7.1 (the latest OS), I could save all troubles and use WPAR.
Can someone comment on this ??
One copy of OS to maintain, so to speak..
... (4 Replies)
Hi All,
This is for WPAR monitoring shell script, earlier opened thread was closed, had to open a new thread, as suggested I have used script as below, But am trying to get the output in below format, need suggestions with it. Below is the lswpar output, required output format.
... (7 Replies)
Anyone running CICS TX in a WPAR ?
In my attempts to run CICS TX 5.1.0.1 in a WPAR..... CICS fails to start due to unable to load a CICS IPC Kernel Extension. The Kernel Extension is 64 bit (so not a 32 vs 64 bit issue).
Base system/LPAR is Power8 and AIX 7.1 TL3 SP5. WPAR is versioned... (4 Replies)
AIX 7.1
New to WPAR, hopefully just missing something simple here.
Creating the WPAR like this.....
(The box where the WPAR is hosted does have an iscsi protocol device)
mkwpar -h wpar08 -l -n wpar08 -N interface=en0 address=xxx.xx.xx.xxx netmask=255.255.255.0 -D devname=/dev/iscsi0 -D... (0 Replies)
I have this error when I'm trying to do clogin from AIX 7200-00-00-0000 into a wpar with AIX 5.2
abanksPaDesa2:/> clogin AbanksBDPA_wpar
exec: A file or directory in the path name does not exist
somebody can help me to fix this? I'm restoring the wpar from wpar mksysb not a mksysb from... (2 Replies)
Discussion started by: sandra25350
2 Replies
LEARN ABOUT DEBIAN
pbuilder-uml.conf
pbuilder-uml.conf(5) pbuilder pbuilder-uml.conf(5)NAME
pbuilder-uml.conf - configuration file for user-mode-linux port of pbuilder
DESCRIPTION
/etc/pbuilder/pbuilder-uml.conf contains default values used in pbuilder-user-mode-linux program invocation.
FORMAT
MY_ETH0=tuntap,,,192.168.0.2
Configures ethernet setting used for booting linux. See how rootstrap boots your system, and copy that.
Specify --eth0=slirp,12345,/usr/bin/slirp-fullbolt to use the slirp connection.
UML_IP=192.168.0.3
IP address to use for guest OS.
This can be set to dhcp for obtaining IP address through DHCP.
UML_NETMASK=255.255.255.0
Guest OS netmask
UML_NETWORK=192.168.0.0
Guest OS network
UML_BROADCAST=255.255.255.255
Guest OS broadcast
UML_GATEWAY=192.168.0.1
Guest OS gateway
PBUILDER_UML_IMAGE=${HOME}/uml-image
Guest OS file system image.
UML_MOUNT_TMPFS=no
Whether to mount tmpfs inside the guest image. This is probably mostly useless.
BUILDPLACE=${HOME}/tmp/
The location which build will take place. pbuilder-user-mode-linux will place temporary COW files to there. The user running UML
needs to be able to access that directory.
UML_MEM=128
The amount of memory allowed for UML. Give more value to here.
UML_HOSTNAME=uml-host
The hostname for the UML.
The hostname should be available in /etc/hosts so that hostname -f will be able to return the FQDN.
UML_BUILDRESULT=/directory/of/build/result
The directory where build result of pbuilder-user-mode-linux is stored.
ROOTSTRAP_IMAGESIZE=size-in-megabytes
The size, in MB, of the disk iamge to create. Defaults to 1000.
NOTES
It is advised to set APTCACHEHARDLINK to no in ~/.pbuilderrc. see pbuilderrc(5) for details.
AUTHOR
Initial coding, and main maintenance is done by Junichi Uekawa <dancer@debian.org>.
The homepage is available at http://pbuilder.alioth.debian.org
FILES
/etc/pbuilder/pbuilder-uml.conf, ${HOME}/.pbuilderrc
SEE ALSO
/usr/share/doc/pbuilder/pbuilder-doc.html, pbuilder-user-mode-linux(1), pbuilder(8), pbuilderrc(5), pdebuild(1)Debian 2003 Jan 8 pbuilder-uml.conf(5)