info(4) 						     Kernel Interfaces Manual							   info(4)

NAME

       info - diskless client configuration information file

DESCRIPTION

       The  file is a POSIX shell sourceable file which contains parameter definitions used at boot time.  Typically, it will be an empty file and
       default values will be used for all parameters.	Following is the list of parameters which can be defined in the file:

	      Specifies the IP address of the client's private root server. If this is not
				       specified, the client's private root server defaults to the boot server.

	      Specifies the pathname to the client's private root on the private root
				       server. If this is not specified, the client's private root path defaults to

	      Specifies the NFS mount options to mount the client's private root from
				       the private root server. If this is not specified, the mount options default to

	      Specifies the NFS mount options to mount the client's
				       directory from the boot server. If this is not specified, the mount options default to

	      Specifies whether NFS should be configured as primary swap. (NOTE: In
				       order to swap to NFS, a diskless kernel must be configured with tunable parameter set to 1.) If a  diskless
				       machine has a local swap disk and swap to NFS is not desired, the parameter should be set to the value of 1
				       and the diskless kernel should be configured without setting to 1. If this parameter is	not  specified	in
				       the file and the kernel tunable parameter is set to 1, then NFS will be configured as primary swap.

	      If not set, this parameter defaults to a value of 1, and results in the
				       removal	of all swapfiles above the configured swap minimum (swap is specified in the client's when a disk-
				       less client boots.  This ensures that extraneous swapfiles at boot time	are  removed,  thus  freeing  disk
				       space.  If is set to 0 in the file, removal of extra swapfiles is disabled.  This may result in faster boot
				       times due to the time savings in creating additional swap files.

       The file resides in the same directory as the client's kernel () on the boot server and is  retrieved  at  boot	time  using  command.	By
       default,  when  a  diskless  client is created, an empty file is placed in the client's kernel directory.  This ensures that all parameters
       revert to their default values (see above).  If the file is not present, this is an error.

EXAMPLES

       An example file is shown below:

FILES

																	   info(4)