I asked the VM guy about "Is your VM provided volume defined as an LVM device or set up to give fixed partitions?"
He replied :
The OS should see one contiguous hard drive. No partitioning
Thanks
Moderator's Comments:
Please wrap all code, files, input & output/errors in CODE tags.
It makes them far easier to read and preserves multiple spaces as these may be critical.
Last edited by rbatte1; 02-19-2015 at 10:50 AM..
Reason: Added CODE tags
Now, i know a ufs file system can be increased using mkfs but hwo do I take space from a file system and add it to another file system? at my job here, that seems to be possible because I see request on it almost every day.
what is the exact command to do this and does the system need to be... (1 Reply)
Hello all
Can someone tell me I am running a script and the outputs directory is too small to contain the newly created file as a result of this script. How can I increase the directory size?
Thanks (9 Replies)
Hi Everybody,
I have AIX 4.3 and I have a FileSystem with 400GB size, which called /db/run. Because of grow up of the application's data, more storage has been added 200GB. To add this space without affecting the application & the application's requirements, I have to add this 200GB to the existed... (9 Replies)
Hi Experts,
I am not sure whether my question should be in this thread or some other one. I am using HP Tru64 system.
Currently one of my filesystem /others is almost full. I need to know the exact commands to increase this filesystem. Please show me how to check for free partitions and add... (5 Replies)
hi
Im using AIX4.3. Through smit I tried to increase the size of a directory. I changed 10,000 blocks more but finally i got 524288 blocks more. That is
before change : 12582912 blocks
I have tried for change: 12592912 blocks
then i execute smit.
But finally I got: ... (3 Replies)
Hello,
Does HACMP have bugs ? I have version 5.4 on AIX 6.1 and when I try to increase filesystem space or logical volume partitions which are under HACMP VG it gives me error:
# lsvg
rootvg
pr0oravg
px0oravg
pb0oravg
pr0sapvg
px0sapvg
pb0sapvg
pr1_pr2_vg
pr2_px1_vg
#
#... (11 Replies)
Hi guys,
I want to increase my ./usr or just one path in my aix6.1 machine.
currently if I
# lsvg rootvg
VOLUME GROUP: rootvg VG IDENTIFIER: 00f6126500004c00000 0012aef0c9035
VG STATE: active PP SIZE: 128... (2 Replies)
Hi All,
I have got a RAID 5 SVM in my Solaris Box. Recently we had performance issues with it. So SUN has told us to increase the interlace size to 128k.
how can we do it so that we have to recreate the RAID 5. ALso guide what are all the pre cautions that we need to take before doing... (1 Reply)
Hi Friends,
I have a problem while increasing the fileystem. Actually the filesystem is 256 gb
and i have to add another 256 gb.So i got a new lun(hdisk) with 256 gb.
I added to the vg using the extendvg command.
It was successfully added, and when i checked the free pp's in vg it was showing... (4 Replies)
Discussion started by: Mohamed Thamim
4 Replies
LEARN ABOUT CENTOS
hd
HD(4) Linux Programmer's Manual HD(4)NAME
hd - MFM/IDE hard disk devices
DESCRIPTION
The hd* devices are block devices to access MFM/IDE hard disk drives in raw mode. The master drive on the primary IDE controller (major
device number 3) is hda; the slave drive is hdb. The master drive of the second controller (major device number 22) is hdc and the slave
hdd.
General IDE block device names have the form hdX, or hdXP, where X is a letter denoting the physical drive, and P is a number denoting the
partition on that physical drive. The first form, hdX, is used to address the whole drive. Partition numbers are assigned in the order
the partitions are discovered, and only nonempty, nonextended partitions get a number. However, partition numbers 1-4 are given to the
four partitions described in the MBR (the "primary" partitions), regardless of whether they are unused or extended. Thus, the first logi-
cal partition will be hdX5. Both DOS-type partitioning and BSD-disklabel partitioning are supported. You can have at most 63 partitions
on an IDE disk.
For example, /dev/hda refers to all of the first IDE drive in the system; and /dev/hdb3 refers to the third DOS "primary" partition on the
second one.
They are typically created by:
mknod -m 660 /dev/hda b 3 0
mknod -m 660 /dev/hda1 b 3 1
mknod -m 660 /dev/hda2 b 3 2
...
mknod -m 660 /dev/hda8 b 3 8
mknod -m 660 /dev/hdb b 3 64
mknod -m 660 /dev/hdb1 b 3 65
mknod -m 660 /dev/hdb2 b 3 66
...
mknod -m 660 /dev/hdb8 b 3 72
chown root:disk /dev/hd*
FILES
/dev/hd*
SEE ALSO chown(1), mknod(1), sd(4), mount(8)COLOPHON
This page is part of release 3.53 of the Linux man-pages project. A description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 1992-12-17 HD(4)