Desired output.txt for reading txt file using awk?
Dear all,
I have a huge txt file (DATA.txt) with the following content [1]. From this txt file, I want the following output [2] using some shell script.
Hello,
I am new to shell scripting, and I am trying to create a script that reads an input like the following
firstname:lastname:age
firstname:lastname:age
firstname:lastname:age
in a text file. I have a 2 part question. First how do I open the file in a shell script. And then how can... (7 Replies)
Hi all,
Iam trying to sort the contents of the file based on the position of the file.
Example:
$cat sample.txt
0101020060731 ## Header record
1c1 Berger Awc ANP20070201301 4000.50
1c2 Bose W G ANP20070201609 6000.70
1c2 Andy CK ANP20070201230 28000.00... (3 Replies)
hi to all
im having some 20,000 files in that im having some contents say the tabulation of biophysics lab readings ... and i want read tat file and look into tat wether a number say -18.90 is there r not .. and if there print tat no wit file name beside
thank you:D (1 Reply)
Hi,
I have already read a lot of posts on sending attachments in unix...but none of them were of help for my problem...so here goes..
i wanna attach a text file and send to a mail id..used the following code :
uuencode "$File1" "$File1" ;|mail -s "$Mail_sub" abc@abc.com
it works... (2 Replies)
HI guys,
I have created a script to read 1 column in a csv file and then place it in text file.
However, when i checked out the text file, it is not in a column format...
Example:
CSV file contains
name,age
aa,11
bb,22
cc,33
After using awk to get first column
TXT file... (1 Reply)
Hi,
I have a .txt file which contains the x, y and z co-ordinates of particles which I am trying to cast for a particular compound. The no. of particles present is of the order of 2 billion and hence the size of the text file is of the order of a few Gigabytes. The particles have been casted layer... (5 Replies)
This is appending a column.
My question is fairly simple. I have a program generating data in a form like so:
1 20
2 22
3 23
4 12
5 43
For ever iteration I'm generating this data. I have the basic idea with cut -f 2 fileA.txt | paste -d >> FileB.txt ???? I want FileB.txt to grow, and... (4 Replies)
Dear Shell scripters,
I have a small code which copy the txt files from some destination to file name OutPutFile.
I want to modify this script to introduce several constant.
The string it is reading is like
... (2 Replies)
I want to add/append the info in the following format to my.txt file.
20130702|abcd20130702.txt FN|SN|DOB
I tried the below script but it throws me some exceptions.
<#!/bin/sh
dt = date '+%y%m%d'members;
echo $dt+|+members+$dt;
/usr/bin/awk -f
BEGIN { FS="|"; OFS="|"; } { print... (6 Replies)
Hi dears
i have text file like this:
INPUT.txt
001_1_173 j nuh ]az
001_1_174 j ]esma. nuh ]/.xori
.
.
. and have another text
like this
TABLE.txt
j j
nuh word1... (6 Replies)
Discussion started by: alii
6 Replies
LEARN ABOUT DEBIAN
output
OUTPUT(5) File Formats Manual OUTPUT(5)NAME
output - output data file formats
DESCRIPTION
This manual page describes the output formats of the files created by the Yagi-Uda project's output program. The files are ASCII file, so
can be analysed with any graph plotting program.
Example of a .dat File
Below is a typical .dat file, for a 4ele 144-146MHz beam, optimised for a huge (and useless) FB.
# Driven=1 parasitic=3 total-elements=4 design=145.000MHz
# Checked from 144.000MHz to 146.000MHz.
f(MHz) E(deg) H(deg) R jX VSWR Gain(dBi) FB(dB) SideLobes(dB)
144.000 54.7 71.5 44.47 -2.35 1.136 9.386 21.944 16.650
144.500 54.0 70.1 41.34 -0.75 1.210 9.553 27.244 17.153
145.000 53.2 68.4 37.55 1.61 1.335 9.742 103.055 17.777
145.500 52.3 66.6 33.26 5.00 1.530 9.947 25.734 18.547
146.000 51.3 64.6 28.77 9.63 1.832 10.149 18.919 18.919
What is what in the .dat file
The f(MHz) column is the frequency (MHz) at which the data is evaluated at.
The E(deg) column is the approximate 3dB E-plane bandwidth calculated to the nearest 0.1 degree.
The H(deg) column is the approximate 3dB H-plane bandwidth calculated to the nearest 0.1 degree.
The (R) column is the input resistance in Ohms.
The (jX) column is the input reactance in Ohms.
The (VSWR) column is the input VSWR, usually refered to a 50 Ohm input, but this may be changed.
The Gain (dBi) column is the gain at theta=90 degrees, which is the forward direction of the beam. It is possible that a higher gain occurs
at other than 90 degrees, but this is not taken into account. The antenna is seriously at fault if this occurs.
The FB(dB) column is the front to back ratio in dB.
The Sidelobes(dB) column is the minimum level in dB down from the peak gain of any sidelobe. This is not calculated unless the '-c' option
is used, and then only on some optimisation techniques.
Example of a .gai File
The following is a small section of the .gai file.
f(MHz) theta gain-E(dBi) G(E)-peak phi gain-H(dBi) G(H)-peak
144.0000 -90.0000-12.5584-21.9444 -180.0000 -12.5584-21.9444
144.0000 -45.0000-7.3507-16.7367 -135.0000 -3.5971-12.9830
144.0000 0.0000 -999.0000 -1008.3860 -90.0000-0.9010-10.2870
144.0000 45.0000 0.1848 -9.2012-45.0000 4.0261 -5.3599
144.0000 90.0000 9.3860 0.0000 0.0000 9.3860 0.0000
144.0000 135.0000 0.1848 -9.2012 45.0000 4.0261 -5.3599
144.0000 180.0000 -999.0000 -1008.3860 90.0000 -0.9010-10.2870
144.0000 225.0000 -7.3507-16.7367 135.0000 -3.5971-12.9830
144.0000 270.0000 -12.5584-21.9444 180.0000 -12.5584-21.9444
What is what in the .gai file
The f(MHz) column is the frequency in MHz.
The theta column is the angle theta, for which the next two columns refer.
The gain-E(dBi) is the gain at theta, relative to an isotropic radiator. This is the E-plane gain. Hence at the peak (theta), this gives
the peak forward gain.
The G(E)-peak is the gain at theta, relative to the peak gain. Hence at the peak (theta=90 degrees), this is zero.
The phi column has nothing to do with the previous 3 columns. It is the angle for which the next two columns refer.
The gain-H(dBi) is the gain at phi, relative to an isotropic radiator. This is the H-plane gain. Hence at the peak (phi=0), this gives the
peak forward gain.
The G(H)-peak is the gain at phi, relative to the peak gain. Hence at the peak (phi=0 degrees), this is zero.
Example of a .up File
The .up file list the improvements made by optimise to an antenna design. Starting from the original design, the file is appended each time
a new better design is found. Here is an example, where the final line is the performance of the 4ele beam with the .dat file shown ear-
lier.
1 7.57dBi, 16.93dB F/B, Z=(31.77-56.34j) Ohms, VSWR=3.95, SL=16.95 dB
84 7.58dBi, 16.93dB F/B, Z=(31.78-56.32j) Ohms, VSWR=3.95, SL=16.95 dB
623 7.58dBi, 16.93dB F/B, Z=(31.78-56.28j) Ohms, VSWR=3.95, SL=16.95 dB
89345 9.74dBi, 103.06dB F/B, Z=(37.55 +1.61j) Ohms, VSWR=1.33, SL=17.78 dB
What is what in the .up file
The first column is an integer specifying the iteration. The other columns, going from left to right are gain(dBi), FB, input impedance,
VSWR and level of the most significant sidelobe, in dB down on the peak gain.
SEE ALS0yagi(1), output(1), input(1), optimise(1), first(1) and yagi(5).
AUTHORS
Dr. David Kirkby G8WRB (david.kirkby@onetel.net), with help with converting to DOS from Dr. Joe Mack NA3T (mack@fcrfv2.ncifcrf.gov).
Version 1.16 24th October 2000 OUTPUT(5)