RSHD(8) 						      System Manager's Manual							   RSHD(8)

NAME

       rshd - remote shell server

SYNOPSIS

       shell stream tcp nowait root /usr/sbin/in.rshd in.rshd
       tcpd shell /usr/sbin/in.rshd

DESCRIPTION

       Rshd is the server for the rcmd(3) routine and, consequently, for the rsh(1) program.  The server provides remote execution facilities with
       authentication based on privileged port numbers from trusted hosts.

       Rshd listens for service requests at the port indicated in the ``cmd'' service specification; see services(5).  When a service  request	is
       received the following protocol is initiated:

       1)     The server checks the client's source port.  If the port is not in the range 0-1023, the server aborts the connection.

       2)     The  server reads characters from the socket up to a null (`') byte.  The resultant string is interpreted as an ASCII number, base
	      10.

       3)     If the number received in step 1 is non-zero, it is interpreted as the port number of a secondary stream to be used for the  stderr.
	      A  second  connection  is  then created to the specified port on the client's machine.  The source port of this second connection is
	      also in the range 0-1023.

       4)     The server checks the client's source address and  requests  the	corresponding  host  name  (see  gethostbyaddr(3N),  hosts(5)  and
	      named(8)).  If the hostname cannot be determined, the dot-notation representation of the host address is used.

       5)     A  null terminated user name of at most 16 characters is retrieved on the initial socket.  This user name is interpreted as the user
	      identity on the client's machine.

       6)     A null terminated user name of at most 16 characters is retrieved on the initial socket.	This user name is interpreted  as  a  user
	      identity to use on the server's machine.

       7)     A  null  terminated command to be passed to a shell is retrieved on the initial socket.  The length of the command is limited by the
	      upper bound on the size of the system's argument list.

       8)     Rshd then validates the user according to the following steps.  The local (server-end) user name is looked up in the  password  file
	      and  a  chdir  is performed to the user's home directory.  If either the lookup or chdir fail, the connection is terminated.  If the
	      user is not the super-user, (user id 0), the file /etc/hosts.equiv is consulted for a list of hosts considered  ``equivalent''.	If
	      the  client's  host  name is present in this file, the authentication is considered successful.  If the lookup fails, or the user is
	      the super-user, then the file .rhosts in the home directory of the remote user is checked for the machine name and identity  of  the
	      user on the client's machine.  If this lookup fails, the connection is terminated.

       9)     A  null  byte  is  returned  on  the initial socket and the command line is passed to the normal login shell of the user.  The shell
	      inherits the network connections established by rshd.

DIAGNOSTICS

       Except for the last one listed below, all diagnostic messages are returned on the initial socket, after which any network  connections  are
       closed.	 An  error  is	indicated by a leading byte with a value of 1 (0 is returned in step 9 above upon successful completion of all the
       steps prior to the execution of the login shell).

       ``locuser too long''
       The name of the user on the client's machine is longer than 16 characters.

       ``remuser too long''
       The name of the user on the remote machine is longer than 16 characters.

       ``command too long ''
       The command line passed exceeds the size of the argument list (as configured into the system).

       ``Login incorrect.''
       No password file entry for the user name existed.

       ``No remote directory.''
       The chdir command to the home directory failed.

       ``Permission denied.''
       The authentication procedure described above failed.

       ``Can't make pipe.''
       The pipe needed for the stderr, wasn't created.

       ``Try again.''
       A fork by the server failed.

       ``<shellname>: ...''
       The user's login shell could not be started.  This message is returned on the connection associated with the stderr, and is not preceded by
       a flag byte.

SEE ALSO

       rsh(1), rcmd(3).

BUGS

       The  authentication  procedure  used here assumes the integrity of each client machine and the connecting medium.  This is insecure, but is
       useful in an ``open'' environment.

       A facility to allow all data exchanges to be encrypted should be present.

       A more extensible protocol should be used.

4.2 Berkeley Distribution					   May 24, 1986 							   RSHD(8)