Sponsored Content
Full Discussion: RAID autodetect in fdisk -l
Top Forums UNIX for Dummies Questions & Answers RAID autodetect in fdisk -l Post 302933304 by admin_db on Thursday 29th of January 2015 09:26:05 AM
Old 01-29-2015
RAID autodetect in fdisk -l

Hello,

Please refer to the below output:

Code:
[root@cincl1001a ~]# fdisk -l /dev/sda

Disk /dev/sda: 598.9 GB, 598999040000 bytes
255 heads, 63 sectors/track, 72824 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          15      120456   fd  Linux raid autodetect
/dev/sda2              16          16        8032+  83  Linux
/dev/sda3              17       69039   554427247+  83  Linux
/dev/sda4           69040       72824    30403012+   f  W95 Ext'd (LBA)
/dev/sda5           69040       70344    10482381   fd  Linux raid autodetect
/dev/sda6           70345       71649    10482381   fd  Linux raid autodetect
/dev/sda7           71650       71910     2096451   fd  Linux raid autodetect
/dev/sda8           71911       72171     2096451   fd  Linux raid autodetect
/dev/sda9           72172       72432     2096451   fd  Linux raid autodetect
/dev/sda10          72433       72521      714861   fd  Linux raid autodetect
/dev/sda11          72522       72824     2433816   fd  Linux raid autodetect

Please help me understand what's the meaning of Linux raid autodetect , Linux and W95Ext'd (LBA) devices?

Best regards,
Vishal
 

9 More Discussions You Might Find Interesting

1. Solaris

using fdisk

how do i know my disk partion using fdisk (4 Replies)
Discussion started by: seyiisq
4 Replies

2. Filesystems, Disks and Memory

Partition management: lvm? fdisk? parted? (on RAID)

Hello, I have a RHEL system with two 500GB hard drives in RAID 1 (I think hardware, but not 100% certain - any way to tell?). It looks like it was just set up in default configuration with a small boot partition and one huge partition for the rest, which composes a LVM volume. I want... (1 Reply)
Discussion started by: builder88
1 Replies

3. UNIX for Dummies Questions & Answers

RAID software vs hardware RAID

Hi Can someone tell me what are the differences between software and hardware raid ? thx for help. (2 Replies)
Discussion started by: presul
2 Replies

4. Solaris

Creation of Raid 01 and Raid 10

Hello All, I have read enough of texts on Raid 01 and Raid 10 on solaris :wall: . But no-where found a way to create them using SVM. Some one pls tell me how to do or Post some link if that helps. TIA Curious solarister (1 Reply)
Discussion started by: Solarister
1 Replies

5. Solaris

fdisk

Hi All, fdisk -l in linux equals in fdisk option in Solaris Thanks.......... (2 Replies)
Discussion started by: pvkarthykeyan
2 Replies

6. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies

7. Solaris

Software RAID on top of Hardware RAID

Server Model: T5120 with 146G x4 disks. OS: Solaris 10 - installed on c1t0d0. Plan to use software raid (veritas volume mgr) on c1t2d0 disk. After format and label the disk, still not able to detect using vxdiskadm. Question: Should I remove the hardware raid on c1t2d0 first? My... (4 Replies)
Discussion started by: KhawHL
4 Replies

8. BSD

OpenBSD fdisk - Linux fdisk compatibility ?

Hello, MBR partition table made by linux fdisk looks certainly not correct when printed by openbsd fdisk: Partition table created on linux (centos 6.3): # fdisk -l /dev/sdc Disk /dev/sdc: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 *... (2 Replies)
Discussion started by: vilius
2 Replies

9. Red Hat

RAID Configuration for IBM Serveraid-7k SCSI RAID Controller

Hello, I want to delete a RAID configuration an old server has. Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton? I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
cmdk(7D)							      Devices								  cmdk(7D)

NAME
cmdk - common disk driver SYNOPSIS
cmdk@target, lun : [ partition | slice ] DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable disks. The cmdk device driver supports three different disk labels: fdisk partition table, Solaris x86 VTOC and EFI/GPT. The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin- gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit- ted. The names of the block files are found in /dev/dsk. Raw file names are found in /dev/rdsk. I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL error. Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area. The fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program. FILES
/dev/dsk/cndn[s|p]n block device (IDE) /dev/rdsk/cndn[s|p]n raw device (IDE) where: cn controller n. dn lun n (0-1). sn UNIX system slice n (0-15). pn fdisk partition (0-36). /kernel/drv/cmdk 32-bit kernel module. /kernel/drv/amd64/cmdk 64-bit kernel module. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |x86 | +-----------------------------+-----------------------------+ SEE ALSO
fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I) SunOS 5.11 4 Nov 2008 cmdk(7D)
All times are GMT -4. The time now is 03:38 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy