Hello,
I have a RHEL system with two 500GB hard drives in RAID 1 (I think hardware, but not 100% certain - any way to tell?).
It looks like it was just set up in default configuration with a small boot partition and one huge partition for the rest, which composes a LVM volume.
I want... (1 Reply)
Hello All,
I have read enough of texts on Raid 01 and Raid 10 on solaris :wall: . But no-where found a way to create them using SVM. Some one pls tell me how to do or Post some link if that helps.
TIA
Curious
solarister (1 Reply)
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Hello,
MBR partition table made by linux fdisk looks certainly not correct when printed by openbsd fdisk:
Partition table created on linux (centos 6.3):
# fdisk -l /dev/sdc
Disk /dev/sdc: 10.7 GB, 10737418240 bytes
255 heads, 63 sectors/track, 1305 cylinders
Units = cylinders of 16065 *... (2 Replies)
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
LEARN ABOUT OPENSOLARIS
cmdk
cmdk(7D) Devices cmdk(7D)NAME
cmdk - common disk driver
SYNOPSIS
cmdk@target, lun : [ partition | slice ]
DESCRIPTION
The cmdk device driver is a common interface to various disk devices. The driver supports magnetic fixed disks and magnetic removable
disks.
The cmdk device driver supports three different disk labels: fdisk partition table, Solaris x86 VTOC and EFI/GPT.
The block-files access the disk using the system's normal buffering mechanism and are read and written without regard to physical disk
records. There is also a "raw" interface that provides for direct transmission between the disk and the user's read or write buffer. A sin-
gle read or write call usually results in one I/O operation; raw I/O is therefore considerably more efficient when many bytes are transmit-
ted. The names of the block files are found in /dev/dsk. Raw file names are found in /dev/rdsk.
I/O requests to the magnetic disk must have an offset and transfer length that is a multiple of 512 bytes or the driver returns an EINVAL
error.
Slice 0 is normally used for the root file system on a disk, slice 1 as a paging area (for example, swap), and slice 2 for backing up the
entire fdisk partition for Solaris software. Other slices may be used for usr file systems or system reserved area.
The fdisk partition 0 is to access the entire disk and is generally used by the fdisk(1M) program.
FILES
/dev/dsk/cndn[s|p]n block device (IDE)
/dev/rdsk/cndn[s|p]n raw device (IDE)
where:
cn controller n.
dn lun n (0-1).
sn UNIX system slice n (0-15).
pn fdisk partition (0-36).
/kernel/drv/cmdk 32-bit kernel module.
/kernel/drv/amd64/cmdk 64-bit kernel module.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86 |
+-----------------------------+-----------------------------+
SEE ALSO fdisk(1M), mount(1M), lseek(2), read(2), write(2), readdir(3C), scsi(4), vfstab(4), attributes(5), dkio(7I)SunOS 5.11 4 Nov 2008 cmdk(7D)