Hi,
I has created the shell script in HP_UX 11.23 and using the command, echo $(date +%Y%m%d%H%M%S) > $DIR/alert, placing the time of running the script into a file alert.
I want to compare the time in the above file alert with the current time.If difference is more than 5 min, then print the... (7 Replies)
Hi,
I am having the following problem.
test > hourOfDay=06 ; delayTime=$(((9-$hourOfDay)*60)) ; echo $delayTime
180
test > hourOfDay=07 ; delayTime=$(((9-$hourOfDay)*60)) ; echo $delayTime
120
test > hourOfDay=08 ; delayTime=$(((9-$hourOfDay)*60)) ; echo $delayTime
bash: (9-08: value... (5 Replies)
The date construct in UNIX can be used to calculate when something is finished: date -v+1H displays the time 1 hour from now.
I want to use the same construct in a script, but it is leading to error messages:
echo "Finished at: " `date -v+$durationH`
where $duration is calculated based on input... (3 Replies)
Dear Folks,
I want to calculate the elapsed hours between two time columns. I am using timestampdiff method for the same. I am able to get the value. But facing an issue of decimal values. For example the elapsed hours between 09:00:00 and 20:30:00 is coming as 11 instead of 11.5. I am using below... (1 Reply)
A report needs to come some what similar to this
No of elements Stream Batch No Load time
A B C D
A,B,C im able to get quite easily
wc -l /usr/local/intranet/areas/prod/output/SRGW_0?/*/MESSAGE_T.dat
O/P of above command.
A B C ... (1 Reply)
Hi All,
I have the following time stamp data in 2 columns
Date TimeStamp(also with milliseconds)
05/23/2012 08:30:11.250
05/23/2012 08:30:15.500
05/23/2012 08:31.15.500
.
.
etc
From this data I need the following output.
0.00( row1-row1 in seconds)
04.25( row2-row1 in... (5 Replies)
Hi all,
I am attempting to calculate a running variance for a file containing a column of numbers. I am using the formula variance=sum((x-mean(x))^2)/(n-1), where x is the value on the current row, and mean(x) is the average of all of the values up until that row. n represents the total number... (1 Reply)
Hey all. I am working on some scripts in bash to perform a variety of functions; there are a variety of steps involved, and they must happen in a specific sequence; what I need help with is a way to calculate some differences in a timestamp in a logfile.
One of the steps in the scripts I am... (3 Replies)
Hi All,
I have written script and wanted to know the run time of it in seconds. i used below logic but am not getting the results in second instead getting error.
cat pkloader.sh
# if you want to calculate the time in milliseconds then use $(date +%s%N)
START_TIME=`date +%s`
echo... (2 Replies)
16:45:51 10051 77845
16:45:51 10051 77845
16:46:52 10051 77846
16:46:53 10051 77846
Match the last PID then subtract second line time with first line.
Please help me with any command or script.
working in media company on a project OS: RHEl7
tried command:
awk 'function... (2 Replies)
Discussion started by: vivekn
2 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)