Hi All ,
I am having confusion in a shell script. Please guide me.
I need to get multiple files (number of files vary time to time, file names are separated by '|') using FTP get from the remote server.
Actually, i call the FTP function in a loop. At the last step, i need to move all the get... (3 Replies)
Hello,
I have a question regarding file naming under a loop in tcsh. I have the following code:
#!/bin/tcsh
foreach file (test/ProteinDirectory/*) # The * is a bunch of ProteinFile1, ProteinFile2, ProteinFile3, etc.
sh /bioinfo/home/dgendoo/THREADER/pGenThreader.sh $file $file
... (4 Replies)
I have an xml file with the structure:
<tag1>
<value1>xyx</value1>
<value2>123</value2>
</tag1>
<tag1>
<value1>568</value1>
<value2>zzzzz</value2>
</tag1>
where I want to parse each data pair in the this single file, so something like:
find first tag1 data pair... (1 Reply)
Hey all,,
I know cshell is harmful:) but I am using this just "to know" - for educational purposes!... not for a long-term use.
lets say i have a list..
set arr=(x y z e f)
I wanna iterate the list with foreach ,, not with while.!!
foreach i $arr
echo $i
end
does not work (2 Replies)
I need to load an XML file and loop through a list of nodes in it to execute a shell script for each one using the attributes for each node as parameters for the script. Any ideas? Any help will be much appreciated. (1 Reply)
I'm trying to send the file list as parameter to another job and execute it.
But the loop doesn't work, the inner job is running only once and not twice as expected
for filelist in $(ls -rt *.txt | tail -2)
do
echo $filelist
export filelist
cmd="$Program -config $configfile -autoexec... (11 Replies)
OS : RHEL 6.1
Shell : Bash
I have lots of files in /tmp/stage directory as show below.
Using a loop, I need to print all the filenames in this directory except those ending with a number. How can I do this ?
# pwd
/tmp/stage
#
#
# ls -l *
-rw-r--r--. 1 root root 0 Oct 7 18:38 stmt1... (2 Replies)
Hi, I have a control file which will contain all filenames(300) files. Loop through all the file names in the control files and check the existence of this file in another directory(same server). I need to infinitely(2 hrs) run this while loop until all the files are found. Once a file is found,... (5 Replies)
Hi guys
I'm a beginner in fortran. So excuse me for my naivety, let me briefly describe what I was trying to do. I have let's say 2 files named reac-1 and reac-2. After opening these files I've to do some calculations, close these files and open the same files again in a loop. So my faulty code... (6 Replies)
Discussion started by: saleheen
6 Replies
LEARN ABOUT FREEBSD
bestups
BESTUPS(8) NUT Manual BESTUPS(8)NAME
bestups - Driver for Best Power / SOLA (Phoenixtec protocol) UPS equipment
NOTE
This man page only documents the hardware-specific features of the bestups driver. For information about the core driver, see nutupsdrv(8).
SUPPORTED HARDWARE
bestups was designed to monitor Best Power UPS hardware like the Fortress, Fortress Telecom, Axxium Rackmount and Patriot Pro. It also
recognizes and supports SOLA units such as the 325, 520 and 620. In addition, the Best 610 is supported using the 'ID' option.
Other UPS hardware using the Phoenixtec protocol should also work, but they will generate a warning since their battery information is not
known.
This driver does not support some older Best/SOLA units.
EXTRA ARGUMENTS
This driver supports the following optional settings in the ups.conf(5):
nombattvolt=num
Override the battery float voltage which is normally determined by asking the hardware. This is useful if your UPS constantly reports
battery.charge values just below 100% even when it's completely charged.
If you have this problem, set this to whatever battery.voltage reports when the UPS is known to be completely charged with a good
battery.
The author's Best Fortress 750 uses nombattvolt=27.4.
battvoltmult=num
Multiply the reported battery voltage by this number. Some devices report only a fraction of the total battery voltage.
For example, the SOLA 610 700VA UPS (with a 24V battery) reports the single cell voltage (about 2.27V when fully charged). In this
particular case you can set battvoltmult = 12 in ups.conf(8) to fix this.
ID=string
Set the Identification response string. This should only be used with hardware that supports the Phoenixtec protocol status inquiry
commands, but not the "ID" command, such as the Best/SOLA 610. Format of the ID string is: AAA,BBBB,CCC,DDD,EE.E,FF.F
AAA is the three-character identification for the UPS model.
BBBB is the output power in VA (volt amperes). B is an integer number ranging from 0 to 9.
CCC is the Nominal Input Voltage. C is an integer number ranging from 0 to 9. The unit is Volts AC.
DDD is the Nominal Output Voltage. D is an integer number ranging from 0 to 9. The unit is Volts AC.
EE.E is the Battery Voltage that will cause the UPS to shut itself off. E is an integer number ranging from 0 to 9. Then unit is Volts
DC and a decimal point is present.
FF.F or FFF.F is the Battery Voltage at full charge. F is an integer number ranging from 0 to 9. Then unit is Volts DC. Typically, for
700VA, 1KVA and 1.5KVA units, the format is FF.F. For 2KVA and 3KVA units, the format is FFF.F.
Example: a Best 610 1.5KVA unit would use the string "610,1500,120,120,10.0,48.0".
BUGS
The battery charge percentage value (in battery.charge) is derived from the voltage data that the UPS returns, since the UPS doesn't return
that value directly. On some hardware, the charge will remain at 100% for a long time and then drops quickly shortly before the battery
runs out. You can confirm from the battery.voltage readings that this is a problem with the UPS and not this driver.
Similarly, the float from the charger in some models forces the battery charge percentage back up to 100% immedately after the UPS goes
back on-line, so you can't tell when it is really recharged.
Finally, some models give one value for the battery's nominal voltage and yet actually have a nominal voltage slightly below that. This
leads to things such as the perpetual 98.7% charge on the author's Fortress 750, even when it's been charging for weeks. You can use
nombattvolt= in ups.conf(8) to fix this.
AUTHOR
Russell Kroll, Jason White
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
Network UPS Tools 05/21/2012 BESTUPS(8)