Sponsored Content
Operating Systems Solaris Hardware RAID using three disks Post 302931961 by hicksd8 on Saturday 17th of January 2015 07:30:16 AM
Old 01-17-2015
Please post the outputs of all the commands listed by MadeInGermany in post#4. The disk might be in use as swap space.

Also, if your filesystems are ufs, please see this thread

Backup root disks

and in particular my "EXTRA NOTE" on my post. It's important that you dump the snapshotted device.

---------- Post updated at 12:30 PM ---------- Previous update was at 12:20 PM ----------

Why do you still contemplate breaking any mirror in order to do patching? You may be thinking that you can keep an original unpatched copy in case something goes wrong but, generally, it is always more difficult to boot the second copy than you think in these circumstances.

Patching doesn't usually go wrong but, if it does, reinitialising a filesystem and restoring from backup (ufsdump in this case) is usually the easiest and quickest route in my experience.
 

9 More Discussions You Might Find Interesting

1. Solaris

Hardware RAID

I don't understood why on SPARC-Platforms have not present RAID-Controller ? Sorry for my bad english, but it's crazy always setup software RAID !!! I whanna Hardware RAID and when i can find solution ? (7 Replies)
Discussion started by: jess_t03
7 Replies

2. Red Hat

IBM RAID disks

We have a Red Hat linux server running on IBM x445 hardware. There are external disks in an IBM EXP300 disk enclosure. The system is running RAID 5. One of the four IBM disks (73.4 GB 10k FRU 06P5760) has become faulty. The system is still up and running OK because of the RAID. In that same EXP300... (3 Replies)
Discussion started by: pdudley
3 Replies

3. Solaris

Move disks to different StorEdge, keeping RAID

Hi. I need to move a 5 disk RAID5 array from a SE3310 box to a different SE3310 array. After installing the disks in the "new" StorEdge device, I "would like" ;) to be able have access to the data which is on the RAID. Essentially, the quesion is, how can this be done? :confused: I checked... (5 Replies)
Discussion started by: alexs77
5 Replies

4. UNIX for Dummies Questions & Answers

RAID software vs hardware RAID

Hi Can someone tell me what are the differences between software and hardware raid ? thx for help. (2 Replies)
Discussion started by: presul
2 Replies

5. Solaris

Solaris not recognizing RAID 5 disks

I've just installed Sol 10 Update 9 on a Sun 4140 server and have a RAID 1 configuration (2 136 Gb drives) for the OS and have created a RAID 5 array (6 136 GB) drives. When i log into the system I am unable to see the RAID 5 disks at all. I've tried using the devfsadm command but no luck and... (9 Replies)
Discussion started by: goose25
9 Replies

6. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies

7. Solaris

Software RAID on top of Hardware RAID

Server Model: T5120 with 146G x4 disks. OS: Solaris 10 - installed on c1t0d0. Plan to use software raid (veritas volume mgr) on c1t2d0 disk. After format and label the disk, still not able to detect using vxdiskadm. Question: Should I remove the hardware raid on c1t2d0 first? My... (4 Replies)
Discussion started by: KhawHL
4 Replies

8. Solaris

Solaris 10 Installation - Disks missing, and Raid

Hey everyone. First, let me start by saying I'm primarily focused on linux boxes, and just happened to get pulled into building two T5220's. I'm not super educated on sun boxes. Both T5220's have 8 146GB 15k SAS drives. Inside the service processor, I can run SHOW /SYS/HDD{0-7} and they all come... (2 Replies)
Discussion started by: msarro
2 Replies

9. Solaris

Hardware raid patching

Dear All , we have hardware raid 1 implemented on Solaris Disks. We need to patch the Servers. Kindly let me know how to patch hardware raid implemented Servers. Thanks... Rj (7 Replies)
Discussion started by: jegaraman
7 Replies
vxbrk_rootmir(1M)														 vxbrk_rootmir(1M)

NAME
vxbrk_rootmir - break off a mirror of a VxVM root disk to create a separate root disk generation SYNOPSIS
/etc/vx/bin/vxbrk_rootmir [-g diskgroup] [-v] [-b] [-t tasktag] {daname|dmname} DESCRIPTION
The vxbrk_rootmir command creates a mirror of a Veritas Volume Manager (VxVM) rootable boot disk, breaks the mirror, and then makes the broken-off mirror into a completely separate root disk that is suitable for booting by itself. Except the specified target disk, the bootdg should not contain any disks other than valid root mirror disks. A valid root mirror disk should have mirrors of all volumes in the bootdg. Thus, all disks must be exactly identical in terms of the volumes contained. The given disk access name, daname, or disk media name, dmname, is first checked to see if it is already a valid root disk mirror. If so, the mirror is broken off from the current VxVM root disk, and regenerated into a unique VxVM root disk. If the specified disk is not a valid root disk mirror, and is unused for other purposes, the vxrootmir command is first called to mirror the specified disk from the cur- rent VxVM root disk. After the mirroring operation is complete, the mirror is then broken off, and regenerated into a unique VxVM root disk. OPTIONS
-b Uses the setboot command to set the alternate boot disk to the specified disk. If the -v option is also specified, information is displayed about the current setboot settings. -g diskgroup Specifies the disk group into which the newly broken-off mirror is to be placed. The disk group is created if it does not already exist. If the disk group already exists, the broken-off mirror is added to it. If this option is not specified, the disk group of the broken-off mirror is set to the current default disk group. However, the generation number is made different from the default disk group to prevent the mirror from being automatically imported. -t tasktag Marks any tasks that are registered to track the progress of an operation with the specified tag, tasktag. This option is passed to vxrootmir if it is necessary first to mirror the specified disk that is to be broken off. -v Displays verbose output, including timestamps for operations that are in progress. This option is passed to vxrootmir if it is neces- sary first to mirror the specified disk that is to be broken off. ARGUMENTS
daname Specifies the disk to be used as the broken off mirror by its disk access name (such as c0t2d0). dmname Specifies the disk to be used as the broken off mirror by its disk media name (such as rootdisk03). EXAMPLES
This example shows the vxbrk_rootmir command being executed on a disk that already contains a valid root mirror: /etc/vx/bin/vxbrk_rootmir -g brkdg -vb c4t15d0 VxVM vxbrk_rootmir INFO V-5-2-4023 17:47: Checking specified disk(s) for presence and type VxVM vxbrk_rootmir INFO V-5-2-4025 17:47: DA c4t15d0s2, DM rootdisk06 is a valid root mirror VxVM vxbrk_rootmir INFO V-5-2-4052 17:47: Saving configuration data for later restoration VxVM vxbrk_rootmir INFO V-5-2-4022 17:47: Breaking off root mirror on DA c4t15d0s2 VxVM vxbrk_rootmir INFO V-5-2-4054 17:47: Setting broken off mirror on c4t15d0s2 as unique root disk VxVM vxbrk_rootmir INFO V-5-2-2566 17:47: Preparing disk c4t15d0s2 as a VxVM root disk VxVM vxbrk_rootmir INFO V-5-2-4046 17:47: Patching devnodes, fstab and volboot file in new Root FS VxVM vxbrk_rootmir INFO V-5-2-4045 17:47: Patching /stand/bootconf file to contain new root disk VxVM vxbrk_rootmir INFO V-5-2-2462 17:48: Current setboot values: VxVM vxbrk_rootmir INFO V-5-2-4048 17:48: Primary: 0/0/2/0.2.0 VxVM vxbrk_rootmir INFO V-5-2-4010 17:48: Alternate: 0/2/1/0.8.0.255.2.5.0 VxVM vxbrk_rootmir INFO V-5-2-4042 17:48: Making c4t15d0s2 (0/2/1/0.8.0.255.1.15.0) the alternate boot disk VxVM vxbrk_rootmir INFO V-5-2-4028 17:48: Disk c4t15d0s2 is now a broken off root disk The next example shows the command being executed on a disk that does not contain a valid root mirror, and which requires vxrootmir be called to mirror the root disk first: /etc/vx/bin/vxbrk_rootmir -g brkdg -vb c5t5d0 VxVM vxbrk_rootmir INFO V-5-2-4023 16:25: Checking specified disk(s) for presence and type VxVM vxbrk_rootmir INFO V-5-2-4043 16:25: Mirroring root disk VxVM vxrootmir INFO V-5-2-2501 16:25: Gathering information on the current VxVM root configuration VxVM vxrootmir INFO V-5-2-2441 16:25: Checking specified disk(s) for usability VxVM vxrootmir INFO V-5-2-2566 16:25: Preparing disk c5t5d0 as a VxVM root disk VxVM vxrootmir INFO V-5-2-3766 16:25: Disk c5t5d0 is now EFI partitioned disk c5t5d0s2 VxVM vxrootmir INFO V-5-2-2410 16:25: Adding disk c5t5d0s2 to brkdg as DM rootdisk03 VxVM vxrootmir INFO V-5-2-1646 16:25: Mirroring all volumes on root disk VxVM vxrootmir INFO V-5-2-1648 16:25: Mirroring volume standvol VxVM vxrootmir INFO V-5-2-1648 16:26: Mirroring volume swapvol VxVM vxrootmir INFO V-5-2-1648 16:30: Mirroring volume rootvol VxVM vxrootmir INFO V-5-2-1648 16:31: Mirroring volume homevol VxVM vxrootmir INFO V-5-2-1648 16:31: Mirroring volume tmpvol VxVM vxrootmir INFO V-5-2-1648 16:31: Mirroring volume usrvol VxVM vxrootmir INFO V-5-2-1648 16:34: Mirroring volume optvol VxVM vxrootmir INFO V-5-2-1648 16:36: Mirroring volume varvol VxVM vxrootmir INFO V-5-2-1616 16:40: Disk c5t5d0s2 is now a mirrored root disk VxVM vxbrk_rootmir INFO V-5-2-4052 16:40: Saving configuration data for later restoration VxVM vxbrk_rootmir INFO V-5-2-4022 16:40: Breaking off root mirror on DA c5t5d0s2 VxVM vxbrk_rootmir INFO V-5-2-4054 16:40: Setting broken off mirror on c5t5d0s2 as unique root disk VxVM vxbrk_rootmir INFO V-5-2-2566 16:40: Preparing disk c5t5d0s2 as a VxVM root disk VxVM vxbrk_rootmir INFO V-5-2-4046 16:41: Patching devnodes, fstab and volboot file in new Root FS VxVM vxbrk_rootmir INFO V-5-2-4045 16:41: Patching /stand/bootconf file to contain new root disk VxVM vxbrk_rootmir INFO V-5-2-2462 16:41: Current setboot values: VxVM vxbrk_rootmir INFO V-5-2-4048 16:41: Primary: 0/0/2/0.2.0 VxVM vxbrk_rootmir INFO V-5-2-4010 16:41: Alternate: 0/2/1/0.8.0.255.2.0.0 VxVM vxbrk_rootmir INFO V-5-2-4042 16:41: Making c5t5d0s2 (0/2/1/0.8.0.255.2.5.0) the alternate boot disk VxVM vxbrk_rootmir INFO V-5-2-4028 16:41: Disk c5t5d0s2 is now a broken off root disk SEE ALSO
vxbootsetup(1M), vxdg(1M), vxintro(1M), vxrootmir(1M), vxtask(1M) VxVM 5.0.31.1 24 Mar 2008 vxbrk_rootmir(1M)
All times are GMT -4. The time now is 06:43 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy