Sponsored Content
Operating Systems Solaris Hardware RAID using three disks Post 302931894 by jegaraman on Saturday 17th of January 2015 03:36:13 AM
Old 01-17-2015
Thanks all for your valuable inputs , shall come back again in case of any doubts....

---------- Post updated 01-17-15 at 12:36 AM ---------- Previous update was 01-16-15 at 05:34 AM ----------

Dear Hicks/All,

1. When I executed the below command.
Code:
#mount

The disk c1t3d0 is not in use , pl find the below outputs

Code:
 # cat /etc/mnttab
/dev/dsk/c1t0d0s0       /       ufs     rw,intr,largefiles,logging,xattr,onerror=panic,dev=800000       1395166360
/devices        /devices        devfs   dev=5680000     1395166347
ctfs    /system/contract        ctfs    dev=56c0001     1395166347
proc    /proc   proc    dev=5700000     1395166347
mnttab  /etc/mnttab     mntfs   dev=5740001     1395166347
swap    /etc/svc/volatile       tmpfs   xattr,dev=5780001       1395166347
objfs   /system/object  objfs   dev=57c0001     1395166347
sharefs /etc/dfs/sharetab       sharefs dev=5800001     1395166347
/platform/SUNW,SPARC-Enterprise-T5220/lib/libc_psr/libc_psr_hwcap2.so.1 /platform/sun4v/lib/libc_psr.so.1       lofs    dev=800000      1395166354
/platform/SUNW,SPARC-Enterprise-T5220/lib/sparcv9/libc_psr/libc_psr_hwcap2.so.1 /platform/sun4v/lib/sparcv9/libc_psr.so.1       lofs    dev=800000      1395166354
fd      /dev/fd fd      rw,dev=5980001  1395166360
swap    /tmp    tmpfs   xattr,dev=5780002       1395166361
swap    /var/run        tmpfs   xattr,dev=5780003       1395166361
/dev/dsk/c1t0d0s3       /opt    ufs     rw,intr,largefiles,logging,xattr,onerror=panic,dev=800003       1395166366
-hosts  /net    autofs  nosuid,indirect,ignore,nobrowse,dev=5a40001     1395166380
auto_home       /home   autofs  indirect,ignore,nobrowse,dev=5a40002    1395166380

So Kindly let me know whether this particular disk c1t3d0 is in use or not.

Because if it is in use , we can take the backup of this and do the patching.

2. And also , on one another Server , I see the SVM is also configured..

/dev/md/dsk/d10 /infovista ufs rw,intr,largefiles,logging,xattr,onerror=panic,dev=154000a

So in this case ,what we should do after splitting the hardware mirror ,

Thanks and Regards ,
Rj
 

9 More Discussions You Might Find Interesting

1. Solaris

Hardware RAID

I don't understood why on SPARC-Platforms have not present RAID-Controller ? Sorry for my bad english, but it's crazy always setup software RAID !!! I whanna Hardware RAID and when i can find solution ? (7 Replies)
Discussion started by: jess_t03
7 Replies

2. Red Hat

IBM RAID disks

We have a Red Hat linux server running on IBM x445 hardware. There are external disks in an IBM EXP300 disk enclosure. The system is running RAID 5. One of the four IBM disks (73.4 GB 10k FRU 06P5760) has become faulty. The system is still up and running OK because of the RAID. In that same EXP300... (3 Replies)
Discussion started by: pdudley
3 Replies

3. Solaris

Move disks to different StorEdge, keeping RAID

Hi. I need to move a 5 disk RAID5 array from a SE3310 box to a different SE3310 array. After installing the disks in the "new" StorEdge device, I "would like" ;) to be able have access to the data which is on the RAID. Essentially, the quesion is, how can this be done? :confused: I checked... (5 Replies)
Discussion started by: alexs77
5 Replies

4. UNIX for Dummies Questions & Answers

RAID software vs hardware RAID

Hi Can someone tell me what are the differences between software and hardware raid ? thx for help. (2 Replies)
Discussion started by: presul
2 Replies

5. Solaris

Solaris not recognizing RAID 5 disks

I've just installed Sol 10 Update 9 on a Sun 4140 server and have a RAID 1 configuration (2 136 Gb drives) for the OS and have created a RAID 5 array (6 136 GB) drives. When i log into the system I am unable to see the RAID 5 disks at all. I've tried using the devfsadm command but no luck and... (9 Replies)
Discussion started by: goose25
9 Replies

6. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies

7. Solaris

Software RAID on top of Hardware RAID

Server Model: T5120 with 146G x4 disks. OS: Solaris 10 - installed on c1t0d0. Plan to use software raid (veritas volume mgr) on c1t2d0 disk. After format and label the disk, still not able to detect using vxdiskadm. Question: Should I remove the hardware raid on c1t2d0 first? My... (4 Replies)
Discussion started by: KhawHL
4 Replies

8. Solaris

Solaris 10 Installation - Disks missing, and Raid

Hey everyone. First, let me start by saying I'm primarily focused on linux boxes, and just happened to get pulled into building two T5220's. I'm not super educated on sun boxes. Both T5220's have 8 146GB 15k SAS drives. Inside the service processor, I can run SHOW /SYS/HDD{0-7} and they all come... (2 Replies)
Discussion started by: msarro
2 Replies

9. Solaris

Hardware raid patching

Dear All , we have hardware raid 1 implemented on Solaris Disks. We need to patch the Servers. Kindly let me know how to patch hardware raid implemented Servers. Thanks... Rj (7 Replies)
Discussion started by: jegaraman
7 Replies
dvdfs(4)						     Kernel Interfaces Manual							  dvdfs(4)

NAME
dvdfs - The Digital Versatile Disk File System [This feature is not supported in Tru64 UNIX Version 5.0] STANDARDS
Interfaces documented on this reference page conform to industry standards as follows: ISO/ITEC 13346:1995 Optical Storage Technology Association (OSTA) Universal Disk Format (UDF) Specification, "OSTA UDF Compliant Domain", Version 2.00. ISO 9660:1988 Information Processing-Volume and file structure of CD-ROM for information interchange. Refer to the standards(5) reference page for more information about industry standards and associated tags. DESCRIPTION
The Digital Versatile Disk File System enables the reading of disks formatted in the Universal Disk Format (UDF). User data sectors in a DVD-ROM can contain any type of data in any format. However, for Tru64 UNIX support through the dvdfs file system, the OSTA UDF file format standard is mandatory. The file system limit for DVDFS is int cfs_cdfs_mount_limit = 512. Additionally, DVD-ROM standards require that the logical sector size and the logical block (the user data block) size be 2048 bytes. DVD support in the UDF specification includes these levels: DVD-ROM (Read-only): Supports reading of UDF-formated files from DVD-ROM disks. DVD-R (Write-once): Supports the reading of UDF-formated files from a DVD-ROM disk and supports writing, one time, UDF-formated files onto a DVD-ROM disk. DVD-RAM (Rewritable): Supports reading and writing of UDF-formated files from and to a DVD-ROM disk. At this time, the Tru64 UNIX dvdfs file system supports only the DVD-ROM (Read-only) format. See mount(8) for information about mounting and unmounting a dvdfs file system, fstab(4) for information about including dvdfs file system in a system's /etc/fstab file, and disklabel(8) for information about labeling DVD-ROM disks. RELATED INFORMATION
Commands: disklabel(8), mount(8) Files: cdfs(4) fstab(4) delim off dvdfs(4)
All times are GMT -4. The time now is 12:06 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy