Thanks for the reply. Pl find the below outputs of the Server implemented Hardware raid. Kindly guide me , I have not done patching in these Hardware raid implemented Servers.
1. Uname -a :
2.
3. df -h
Thanks and regards ,
Rj
Last edited by DukeNuke2; 01-11-2015 at 02:25 PM..
I don't understood why on SPARC-Platforms have not present RAID-Controller ? Sorry for my bad english, but it's crazy always setup software RAID !!! I whanna Hardware RAID and when i can find solution ? (7 Replies)
Hi,
I have t5120 sparc and I have 2 146 G drives in the system. I will be installing solaris 10 and also want the system mirrored using Hardware RAID "1"
The System did come preinstalled as it comes from sun. I did not do much on it.
I booted system using boot cdrom -s
gave format... (6 Replies)
Hi,
I have a root with hardware RAID on c0t0d0 and c0t2d0. I would like to set the boot device sequence in OBP for both hdds.
I have checked in ls -l /dev/rdsk/ for the path of c0t2d0 but it does not exist. Can anyone shed some lights on this?
AVAILABLE DISK SELECTIONS:
0.... (12 Replies)
Hi,
I have a question. Do LiveUpgrade supports hardware raid?
How to choose the configuration of the system disk for Solaris 10 SPARC?
1st Hardware RAID-1 and UFS
2nd Hardware RAID-1 and ZFS
3rd SVM - UFS and RAID1
4th Software RAID-1 and ZFS
I care about this in the future to take... (1 Reply)
Hi all
I've just received my T3-1. It has 8 disks and I would like to configure RAID1 on the disks. The Sun documentation states that you can either use the OpenBoot PROMP utility called Fcode or you can use software via the Solaris OS.
The documentation doesn't make it clear if:
1. The... (6 Replies)
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Dear All ,
We need to do patching on one Solaris Server , where we have raid 0 configured.
What is the process to patch a Server if RAID 0 (Concat/Stripe) is there.
Below is the sample output.
# metadb
flags first blk block count
a m pc luo 16 ... (1 Reply)
Dear All ,
Pl find the below command ,
# raidctl -l
Controller: 1
Volume:c1t0d0
Disk: 0.0.0
Disk: 0.1.0
Disk: 0.3.0
#
raidctl -l c1t0d0
Volume Size Stripe Status Cache RAID
Sub Size ... (10 Replies)
Discussion started by: jegaraman
10 Replies
LEARN ABOUT CENTOS
splitdiff
SPLITDIFF(1) Man pages SPLITDIFF(1)NAME
splitdiff - separate out incremental patches
SYNOPSIS
splitdiff [-a] [-d] [-p n] [-E] [file]
splitdiff {[--help] | [--version]}
DESCRIPTION
If you have a patch file composed of several incremental patches, you can use splitdiff to separate them out. You may want to do this in
preparation for re-combining them with combinediff(1).
The effect of running splitdiff is to separate its input into a set of output files, with no output file patching the same file more than
once.
OPTIONS -a
Split out every single file-level patch.
-d
Create file names such as a_b.c.patch for a patch that modifies a/b.c.
-p n
Strip the first n components of the pathname to aid comparisons.
-E
Don't use .patch filename extension when writing output files.
--help
Display a short usage message.
--version
Display the version number of splitdiff.
SEE ALSO combinediff(1), lsdiff(1)AUTHOR
Tim Waugh <twaugh@redhat.com>
Package maintainer
patchutils 25 May 2011 SPLITDIFF(1)