NETRA240 in HLR CDMA Wireless Exchange... help is apreciated
Greetings,
I hope my post finds you all OK,
I have a Netra240 server in an HLR inside a wireless CDMA Exchange, it works as a Hard Disk Unit (HDU) as shown in Local Management Terminal (LMT) as show in the picture 1 attached.
The power went down because of a power failure in main UPS, when resuming , both Netra240 servers flash the amber light and show red indication in the LMT.
I connected a console wire and logged in to ALOM, then want to go to console, it gives:
"root password for maintenance or control-d to continue" and did not accept the password, and i know that all passwords are still defaults.
My points is that i want to resume the 2 netra servers to work, because the exchange is offline now,
I attached a debug file when i connected by Putty, also some pictures,
Any help is appreciated specially i have basic information in Unix...
Hi everyone
I am setting up my own web hosting and dns server - have got all the dns and web server things sorted out. I am wondering if anyone knows what I need to do to enable my customers to have their own pop and smtp access under their own domains which they host with me. I have two ip... (2 Replies)
I've got a question regarding setting up mail between two unix boxes. Is it possible to setup two boxes conected via a hub and allow them to send mail using the Netscape Messenger. I know that I can be done so using the UNIX sendmail but I need to connect them via Messenger as my ultimate goal is... (0 Replies)
Hey all,
I have teh job of exporting all the information for around 500 e-mail addresses from exchange into something like a excel sheet.
I was pretty quiet one afternoon last week (and bore) so I added them to my adddresses book then exported them to excel. But I now have a problem, it does... (0 Replies)
AIX 5.3
Domain: domainna
Exchange Server: ex05.domainname.com
Our emails that are generated from Unix going to the "outside world" are now being rejected by most hosts. The current relay is listed as user@domainna.
Here is a snippet from the log... 1356561:Aug 21 08:04:05 domainna... (0 Replies)
Hi people,
In my work i have 2 P595 server (P595A and P595B) i need to exchange one server from P595A to P595B and one from P595B to P595A, i know the best way to do this is make a mksysb copy of the system and restore it on another but, in this process i dont need to exchange all the server,... (4 Replies)
I haven't seen many updates so im here to ask my fellow *nix users if they have found a way or have atleast heard anything about GUI Mail Client that can access mail from a MS Exchange server. I know that Evolution stopped worked up until Exchange 2003 but not for 2007 or 2010.
It doesn't seem... (4 Replies)
Hello all,
This is a bit simple but I cannot do it! I have a big table of values between 0 and 1. some cells have NA instead of having any value.
I want to exchange all values with "1" and write "0" for all "NA" .
for changing "NA" to zero I used sed:
sed -i 's/NA/0/g' input.txt
But... (3 Replies)
Hi Everybody,
Hope everybody is having fun with their Solaris installations and not pulling out too much of whatever hair they have left so far. :)
Just for sport, I bought an old Netra 240 used by Northern Telecom Turkish subsidiary Netas here in Turkey. My hope is to turn this into an ugly... (33 Replies)
Discussion started by: ozsavran
33 Replies
LEARN ABOUT SUSE
wireless
WIRELESS(7) Linux Programmer's Manual WIRELESS(7)NAME
wireless - Wireless Tools and Wireless Extensions
SYNOPSIS
iwconfig
iwpriv -a
DESCRIPTION
The Wireless Extensions is an API allowing you manipulate Wireless LAN networking interfaces. It is composed of a variety of tools and
configuration files. It is documented in more detail in the Linux Wireless LAN Howto.
The Wireless Tools are used to change the configuration of wireless LAN networking interfaces on the fly, to get their current configura-
tion, to get statistics and diagnose them. They are described in their own man page, see below for references.
Wireless configuration is specific to each Linux distribution. This man page will contain in the future the configuration procedure for a
few common distributions. For the time being, check the file DISTRIBUTIONS.txt included with the Wireless Tools package.
DEBIAN 3.0
In Debian 3.0 (and later) you can configure wireless LAN networking devices using the network configuration tool ifupdown(8).
File : /etc/network/interfaces
Form : wireless-<function> <value>
wireless-essid Home
wireless-mode Ad-Hoc
See also :
/etc/network/if-pre-up.d/wireless-tools
/usr/share/doc/wireless-tools/README.Debian
SuSE 8.0
SuSE 8.0 (and later) has integrated wireless configuration in their network scripts.
Tool : Yast2
File : /etc/sysconfig/network/wireless
/etc/sysconfig/network/ifcfg-*
Form : WIRELESS_<function>=<value>
WIRELESS_ESSID="Home"
WIRELESS_MODE=Ad-Hoc
See also :
man ifup
info scpm
ORIGINAL PCMCIA SCRIPTS
If you are using the original configuration scripts from the Pcmcia package, you can use this method.
File : /etc/pcmcia/wireless.opts
Form : *,*,*,*)
ESSID="Home"
MODE="Ad-Hoc"
;;
See also :
/etc/pcmcia/wireless
File PCMCIA.txt part of Wireless Tools package
AUTHOR
Jean Tourrilhes - jt@hpl.hp.com
http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
SEE ALSO iwconfig(8), iwlist(8), iwspy(8), iwpriv(8), iwevent(8).
wireless-tools 4 March 2004 WIRELESS(7)