and on solaris i put config with sysidcfg,profile,etc
When solaris boot from net it ask for configuration(so is ignoring profile and sysidcfg)because doesn't mount the resource.
---------- Post updated 06-12-14 at 05:44 PM ---------- Previous update was 05-12-14 at 07:11 PM ----------
I set up new profile sysidcfg,etc
and now solaris works perfect but only on solaris server
if i use linux it works,get rules,profile but exit with this error
*** I also posted this in the Unix general forum, but would like to get the Linux point of view. ***
Hello all -
I've searched this forum, but was unable to find out the info I need.
I'm trying to mount (nfs mount) a directory on another box from my Linux machine.
The mount point... (1 Reply)
Hello, I am running a Suse Linux server and I want to set up a NFS Server for a few Unix machines. For the root account at the unix client it works fine but it doesn't work for other users who have no root rights.
I've used the no_root_squash and the rw option in the etc/export file. My folder... (7 Replies)
Hi,
I am using RH-AS as my jumpstart server for installing solaris 8 on a sun machine.
the finish script phase starts ok but some where in the middle it fails - i tried it servel times and each time it fails in a differnt place. I get "not found" message for all kind of basic command like awk,... (4 Replies)
Hi everyone,
The last two days I'm researching results of NFS operations on Linux, and I noticed some time difference when read and write.
cat /proc/version : Linux version 2.6.9-42.ELsmp (bhcompile@hs20-bc1-1.build.redhat.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-2)) #1 SMP Wed Jul 12... (1 Reply)
Hello...
I've mounted a share using standard nomenclature for the NFS mount command with the following command line:
mount -t nfs -o rw {IP address1}:/ /mnt_for_70 / {IP address2}(rw)
mnt_for_70 is a mount point I created on {IP address2}
I'm confuse and want to be sure I use the... (1 Reply)
Hi,
I am trying to mount a nfs folder from AIX client to Linux NFS Server, but I got the following error:
# mount 128.127.11.121:/aix /to_be_del
mount: 1831-010 server 128.127.11.121 not responding: RPC: 1832-018 Port mapper
failure - RPC: 1832-008 Timed out
mount: retrying... (1 Reply)
Hi,
I have some filesystem which is nfs mounted and shared to other servers.
Nfs server name= nfsserver (here filesystem is locally mounted)
server name where filesystem is shared = sharedserver1 and sharedserver2
filesystem which is shared = /filesystem1
when i am checking utilization by... (1 Reply)
Hi All,
Is there a command or script which will push a file from Windows server to Linux box? using the mount command. I want the details or document of the whole process please.
I want this script to run every 30 minutes to push the file from windows to unix
Thanks (16 Replies)
Discussion started by: thinkingeye
16 Replies
LEARN ABOUT SUNOS
root_archive
root_archive(1M)root_archive(1M)NAME
root_archive - manage bootable miniroot archives
SYNOPSIS
/boot/solaris/bin/root_archive pack archive root
/boot/solaris/bin/root_archive unpack archive root
/boot/solaris/bin/root_archive packmedia solaris_image root
/boot/solaris/bin/root_archive unpackmedia solaris_image root
The root_archive utility is used to manage bootable miniroot archives and is currently only available on platforms. The utility can pack
and unpack boot/root archives in both ufs and hsfs (iso9660) format. It will always generate ufs archives.
root_archive also uses the lofi file driver to export a file as a block device (see lofi(7D)) and mount to mount or unmount file systems
and remote resources (see mount(1M)). root_archive requires the same privileges that are needed to run these commands.
SUBCOMMANDS
The root_archive command has the following subcommands:
pack archive root
Pack from the image found under the root directory to the archive.
unpack archive root
Unpack from the archive to an unpacked image under the root directory.
packmedia solaris_image root
Pack the solaris image to the root directory.
unpackmedia solaris_image root
Unpack the solaris image from the root directory.
For packmedia and unpackmedia, other items that do not go into the ramdisk image are copied or uncopied (see cpio(1)) as well. Specifi-
cally, this includes all the packaging databases needed for pkgadd and the other packaging utilities to succeed which are not used in the
running and hence pruned to conserve memory.
EXAMPLES
Example 1: Unpacking the Solaris x86 install image
The following command unpacks the current Solaris image from the root directory:
# root_archive unpackmedia
/export/nv/solarisdvd.nvx_dvd/latest /export/Boot
Where /export/nv/solarisdvd.nvx_dvd/latest represents a path to a Solaris x86 install image and /export/Boot is a directory that will be
purged or created, as necessary.
Example 2: Packing the Solaris x86 install image
The following command packs the current Solaris image to the root directory:
# root_archive packmedia
/export/nv/solarisdvd.nvx_dvd/latest /export/Boot
The following exit values are returned:
0
The command completed successfully.
1
The command exited due to an error.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Stable |
+-----------------------------+-----------------------------+
cpio(1), bootadm(1M), mount(1M), attributes(5), lofi(7D)
26 Sep 2005 root_archive(1M)
12-06-2014
