1]that the code was not consistent in its behaviour. I noticed it would only run when minicom was running; ie the COM port was not consistently configured.. This code fixed the problem
2] The PHP script and C program were not communicating properly. The C program was being called from within a PHP script. The C program wrote to the port and read the output. The PHP script formatted and displayed the output. So... called the PHP script as the last line in the C program.
One problem remains..
I am still, regretably, having problems in writing to the scale.
I think my serial port(on board) is not working ......
because when I am running same code on two machines its working good....but when my system comes into picture ....it doesnt show any output comming from serial port..........
can anybody tell me how to configure my serial port.........or to... (16 Replies)
Hi,
I am working with solaris 9,SUN-Blade-100 and I want to communicate with the Serial port.To check whether the port is working or not.I write code and when I execute the file,then I got the output--
According to this,serial port is not found.can anyone please tell me how to configure the... (1 Reply)
I have a need to determine when a string has been completely sent via a serial port from a standard 'C' application. The code is as follows:
SerialPort_Send = open (pPortString, O_WRONLY | O_NOCTTY | O_NONBLOCK);
write (SerialPort_Send, pCommandString, strlen (pCommandString));
... (2 Replies)
Hi,
How can i configure my modem in AIX thru serial port (sa0-->tty0)
I have two port serial card configured as sa0
I created tty1 which port is tty0 and which port is tty1 how can i know?? (1 Reply)
A neighbour's Ubuntu 10.04 machine has five serial ports, one on the motherboard and four on a PCI card. However, only four cards are showing:
# dmesg | grep tty
console enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
... (2 Replies)
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
hello all,
please any one can provide me the shell script to write data to /dev/ttyS1
and read responce from /dev/ttyS1 and compare the responce to some string ..
thnxx
---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ----------
any body help me..
how do i... (1 Reply)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
LEARN ABOUT PHP
eval
EVAL(3) 1 EVAL(3)eval - Evaluate a string as PHP codeSYNOPSIS
mixed eval (string $code)
DESCRIPTION
Evaluates the given $code as PHP.
Caution
The eval(3) language construct is very dangerous because it allows execution of arbitrary PHP code. Its use thus is discouraged.
If you have carefully verified that there is no other option than to use this construct, pay special attention not to pass any user
provided data into it without properly validating it beforehand.
PARAMETERS
o $code
- Valid PHP code to be evaluated. The code mustn't be wrapped in opening and closing PHP tags, i.e. 'echo "Hi!";' must be passed
instead of '<? echo "Hi!"; >'. It is still possible to leave and reenter PHP mode though using the appropriate PHP tags, e.g.
'echo "In PHP mode!"; ?>In HTML mode!<? echo "Back in PHP mode!";'. Apart from that the passed code must be valid PHP. This
includes that all statements must be properly terminated using a semicolon. 'echo "Hi!"' for example will cause a parse error,
whereas 'echo "Hi!";' will work. A return statement will immediately terminate the evaluation of the code. The code will be exe-
cuted in the scope of the code calling eval(3). Thus any variables defined or changed in the eval(3) call will remain visible
after it terminates.
RETURN VALUES eval(3) returns NULL unless return is called in the evaluated code, in which case the value passed to return is returned. If there is a
parse error in the evaluated code, eval(3) returns FALSE and execution of the following code continues normally. It is not possible to
catch a parse error in eval(3) using set_error_handler(3).
EXAMPLES
Example #1
eval(3) example - simple text merge
<?php
$string = 'cup';
$name = 'coffee';
$str = 'This is a $string with my $name in it.';
echo $str. "
";
eval("$str = "$str";");
echo $str. "
";
?>
The above example will output:
This is a $string with my $name in it.
This is a cup with my coffee in it.
NOTES
Note
Because this is a language construct and not a function, it cannot be called using variable functions.
Tip
As with anything that outputs its result directly to the browser, the output-control functions can be used to capture the output of
this function, and save it in a string (for example).
Note
In case of a fatal error in the evaluated code, the whole script exits.
SEE ALSO call_user_func(3).
PHP Documentation Group EVAL(3)