HI
We have been asked by our IT department to move from our current physical solution to a VM environment. I am not that clued up on VM.
I looked from some benchmark tests to run so i can see a comparison between our live and new VM we have been presented. Please see below for results.
To me the VM looks slower. Can someone advice please and offer advice on any other tests we can run please.
We are running Redhat Enterprise 6.4.
Thanks in Advanced
Treds
Moderator's Comments:
Please use code tags next time for your code and data not HTML Thanks
i recently purchased a dual ross sparc processor kit from someone.
the person listed these items as 133mhz processors, however, looking at bridgepoint's site, they do not make 133mhz processors.
so i was wondering, how can i check the processor speeds? (4 Replies)
Hello all,
We have a group of Solaris 8 machines that are having some real network performance issues, they all go through a switch which *should* be set at 100 mb full duplex on every port which goes back to a master switch. I have checked the machines and the NIC cards are all set at 100 full.... (9 Replies)
Hello,
I have a SUN T5240 running Solaris 10 with Logical Domain Manager (v 1.0.3). You can use the "ldm" command to display current resources on the box. Is there away to display all the "physical resources" on the box(i.e.,used and unused). For example, "ldm ls" will tell me what the... (5 Replies)
We have some AIX Unix Servers with 4 or 6 CPU and when type this command “c” in nmon always displays each cpu % with Averages on buttom. However we have several Servers with 18 CPU's and it only shows 16 17 on main page. Does nmon have some command that would show remaining with totals for Physical... (3 Replies)
Hello All,
Can anybody please tell me what is the maximum limit of Physical IBM Power Machine which can be handled by single HMC at a single point of time?
Thanks,
Jenish (1 Reply)
Hi all
I have connected new server to LAN but when I use rlogin command by server name it dose not work but by IP adderss it works.
can any one tell the reason? (4 Replies)
Hi All,
How can I know whether the server I am connecting to is a virtual or physical one? The server might be having any Unix OS (Linux/Solaris/HP-UX etc.).
Is there any system files / commands which can show these concrete information?
Thanks in advance for the replies.
sanzee (1 Reply)
Hi,
i am trying to find whether any particular solaris server is physical or virtual....are there any commands or set of commands which only runs (or provide specific pattern ) on physical machines and provides different pattern or error on virtual one...
Is this the correct approach to... (7 Replies)
Need inputs when physical server is coming down (ex- init 0) .
We have a physical server in that there are couple of LDOM's and in LDOM's there are couple of Zones . In zones there are applications running .
Physical Server (T4 Server) -> LDOM -> ZONES -> applications
There are scripts... (1 Reply)
Discussion started by: ajayram_arya
1 Replies
LEARN ABOUT PHP
speed
SPEED(1SSL) OpenSSL SPEED(1SSL)NAME
openssl-speed, speed - test library performance
SYNOPSIS
openssl speed [-help] [-engine id] [-elapsed] [-evp algo] [-decrypt] [-rand file...] [-writerand file] [-primes num] [-seconds num]
[-bytes num] [algorithm...]
DESCRIPTION
This command is used to test the performance of cryptographic algorithms. To see the list of supported algorithms, use the list
--digest-commands or list --cipher-commands command. The global CSPRNG is denoted by the rand algorithm name.
OPTIONS -help
Print out a usage message.
-engine id
Specifying an engine (by its unique id string) will cause speed to attempt to obtain a functional reference to the specified engine,
thus initialising it if needed. The engine will then be set as the default for all available algorithms.
-elapsed
When calculating operations- or bytes-per-second, use wall-clock time instead of CPU user time as divisor. It can be useful when
testing speed of hardware engines.
-evp algo
Use the specified cipher or message digest algorithm via the EVP interface. If algo is an AEAD cipher, then you can pass <-aead> to
benchmark a TLS-like sequence. And if algo is a multi-buffer capable cipher, e.g. aes-128-cbc-hmac-sha1, then -mb will time multi-
buffer operation.
-decrypt
Time the decryption instead of encryption. Affects only the EVP testing.
-rand file...
A file or files containing random data used to seed the random number generator. Multiple files can be specified separated by an OS-
dependent character. The separator is ; for MS-Windows, , for OpenVMS, and : for all others.
[-writerand file]
Writes random data to the specified file upon exit. This can be used with a subsequent -rand flag.
-primes num
Generate a num-prime RSA key and use it to run the benchmarks. This option is only effective if RSA algorithm is specified to test.
-seconds num
Run benchmarks for num seconds.
-bytes num
Run benchmarks on num-byte buffers. Affects ciphers, digests and the CSPRNG.
[zero or more test algorithms]
If any options are given, speed tests those algorithms, otherwise a pre-compiled grand selection is tested.
COPYRIGHT
Copyright 2000-2018 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the OpenSSL license (the "License"). You may not use this file except in compliance with the License. You can obtain a
copy in the file LICENSE in the source distribution or at <https://www.openssl.org/source/license.html>.
1.1.1a 2018-12-18 SPEED(1SSL)