SHOREWALL6-ROUTESTO(5)						  [FIXME: manual]					    SHOREWALL6-ROUTESTO(5)

NAME

       routestopped - The Shorewall6 file that governs what traffic flows through the firewall while it is in 'stopped' state.

SYNOPSIS

       /etc/shorewall6/routestopped

DESCRIPTION

       This file is used to define the hosts that are accessible when the firewall is stopped or is being stopped. When shorewall6-shell is being
       used, the file also determines those hosts that are accessible when the firewall is in the process of being [re]started.

       The columns in the file are as follows (where the column name is followed by a different name in parentheses, the different name is used in
       the alternate specification syntax).

       INTERFACE - interface
	   Interface through which host(s) communicate with the firewall

       HOST(S) - [-|address[,address]...]
	   Optional comma-separated list of IP/subnet addresses. If your kernel and ip6tables include iprange match support, IP address ranges are
	   also allowed.

	   If left empty or supplied as "-", 0.0.0.0/0 is assumed.

       OPTIONS - [-|option[,option]...]
	   An optional comma-separated list of options. The order of the options is not important but the list can contain no embedded whitespace.
	   The currently-supported options are:

	   routeback
	       Set up a rule to ACCEPT traffic from these hosts back to themselves. Beginning with Shorewall 4.4.9, this option is automatically
	       set if routeback is specified in shorewall6-interfaces[1] (5) or if the rules compiler detects that the interface is a bridge.

	   source
	       Allow traffic from these hosts to ANY destination. Without this option or the dest option, only traffic from this host to other
	       listed hosts (and the firewall) is allowed. If source is specified then routeback is redundant.

	   dest
	       Allow traffic to these hosts from ANY source. Without this option or the source option, only traffic from this host to other listed
	       hosts (and the firewall) is allowed. If dest is specified then routeback is redundant.

	   critical
	       Allow traffic between the firewall and these hosts throughout '[re]start', 'stop' and 'clear'. Specifying critical on one or more
	       entries will cause your firewall to be "totally open" for a brief window during each of those operations. Examples of where you
	       might want to use this are:

	       o   'Ping' nodes with heartbeat.

	       o   LDAP server(s) if you use LDAP Authentication

	       o   NFS Server if you have an NFS-mounted root filesystem.

	   Note
	   The source and dest options work best when used in conjunction with ADMINISABSENTMINDED=Yes in shorewall6.conf[2](5).

EXAMPLE

       Example 1:

		       #INTERFACE      HOST(S)		       OPTIONS
		       eth2	       2002:ce7c:92b4::/64
		       eth0	       2002:ce7c:92b4:1::/64
		       br0	       -		       routeback
		       eth3	       -		       source

FILES

       /etc/shorewall6/routestopped

SEE ALSO

       http://shorewall.net/starting_and_stopping_shorewall.htm

       http://shorewall.net/configuration_file_basics.htm#Pairs

       shorewall6(8), shorewall6-accounting(5), shorewall6-actions(5), shorewall6-blacklist(5), shorewall6-hosts(5), shorewall6-interfaces(5),
       shorewall6-maclist(5), shoewall6-netmap(5),shorewall6-params(5), shorewall6-policy(5), shorewall6-providers(5), shorewall6-rtrules(5),
       shorewall6-rules(5), shorewall6.conf(5), shorewall6-secmarks(5), shorewall6-tcclasses(5), shorewall6-tcdevices(5), shorewall6-tcrules(5),
       shorewall6-tos(5), shorewall6-tunnels(5), shorewall6-zones(5)

NOTES

	1. shorewall6-interfaces
	   http://www.shorewall.net/manpages6/shorewall6-interfaces.html

	2. shorewall6.conf
	   http://www.shorewall.net/manpages6/shorewall6.conf.html

[FIXME: source] 						    06/28/2012						    SHOREWALL6-ROUTESTO(5)