Hi all,
My disk space is 100% full.
df -k <dir> -> 100%
One of my debug files consume huge amount of space and i want to remove the same to start off fresh debugs.
However i'm unable to remove the file giving out the following error message:
rm -f debug.out22621
rm: cannot remove... (8 Replies)
Hello guys,
It would be so nice of you if someone can provide me with these informations.
1) My SAN group assigned 51G of LUN space to the VIO server.I ran cfgdev to discover the newly added LUN. Unfortunately most of the disks that are in VIO server is 51G. How would I know which is the newly... (3 Replies)
Hi Gurus,
I have to back the /var to other disk, however I am unable to do so. What I did is
Created a partition on another disk, placed file system on the slice and mounted on /mnt .
Issued following command
#ufsdump 0cfu /mnt /var
And I am getting... (2 Replies)
I am running Ubuntu Server, I recently added a new hard drive to the machine
When I run fdisk -l I see both drives.
The recently added drive is present but it's listed as extended.
when I try to mount the drive it says you must specify the file system type.
I can't mount this drive, I was... (2 Replies)
Hello,
Lets say for simplicity that I do not use any vlan config inside my server - one lpar group use hea physical port1, another group hea physical port2. Physical port1 configured as vlan1 on external switch, physical port2 as vlan2.
What is the common practice - should I isolate my vios... (0 Replies)
is there any way to create shared virtual disk between two LPARs like how you can do it using Storage through Fiber on two servers ?
Trying to stimulate HACMP between two LPARs (1 Reply)
Update:
The / file system (/dev/rdsk/c1t0d0s0) is being checked
fsck unable to stat
WARNING - unable to repair the / filesystem. Run fsck manually (fsck -F ufs /dev/rdsk/c1t0d0s0).
Root password for system maintenance (control-d to bypass):
I am unable to hit control-d to by pass.
I... (50 Replies)
Hello,
VIOS 2.2.1.4 using IVM.
I'm trying to extend a virtual disk assigned to a running lpar so that I can expand the lpar's datavg and grow some filesystems for the user.
Storage admin expanded the lun and new size was reflected in VIO right away. I then needed the storage pool to... (2 Replies)
Hi everybody,
I have Power5 server with 4 internal hdisks each of 70Gb.
VIOS server was installed via Virtual I/O Server Image Repository on the HMC.
HMC release - 7.7.0
VIOS rootvg installed on 2 disk(these disks merged to one storage pool during VIOS install process),and 2 others hdisks... (2 Replies)
Discussion started by: Ravil Khalilov
2 Replies
LEARN ABOUT HPUX
vxdestroy_lvmroot
vxdestroy_lvmroot(1M)vxdestroy_lvmroot(1M)NAME
vxdestroy_lvmroot - remove LVM root disk and associated LVM volume group
SYNOPSIS
vxdestroy_lvmroot [-v] [-b] lvm_root_disk
DESCRIPTION
The vxdestroy_lvmroot command tears down and removes the LVM volume group associated with the specified physical disk. This is done by
removing the volumes in the volume group and then removing the volume group.
OPTIONS -b Invokes the setboot command to change the primary boot disk to the VxVM root disk from which the system was booted (if the pri-
mary boot disk is not already set to this disk). The alternate boot device remains unchanged. If the -v option is also speci-
fied, the settings of the primary and alternate boot devices are displayed.
-v Outputs verbose messages including a timestamp that indicates major operations being performed.
ARGUMENTS
lvm_root_disk
Specifies the device name of the LVM root disk that is to be destroyed, along with its entire volume group.
EXAMPLES
This example shows the vxdestroy_lvmroot command invoked in its simpliest form:
/etc/vx/bin/vxdestroy_lvmroot c5t1d0
# /etc/vx/bin/vxdestroy_lvmroot -v -b c3t0d0
Are you sure about destroying c3t0d0 (imported on VG /dev/vg02) ? YES
vxdestroy_lvmroot 06:02: Tearing down /dev/vg02 on device c3t0d0
vxdestroy_lvmroot 06:02:
Unmounting and removing any volumes associated with /dev/vg02
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol1
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol2
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol3
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol4
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol5
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol6
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol7
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol8
vxdestroy_lvmroot 06:02: Removing Volume Group /dev/vg02
vxdestroy_lvmroot 06:02: Removing device files in /dev/vg02
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c3t0d0
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d3
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d4
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d5
vxdestroy_lvmroot 06:03: Current setboot values:
vxdestroy_lvmroot 06:03: Primary: 0/0/6/0/0.0.0
vxdestroy_lvmroot 06:03: Alternate: 0/0/1/0/0.1.0
vxdestroy_lvmroot 06:03:
Making disk c0t1d0 (0/0/1/0/0.1.0) the primary boot disk
vxdestroy_lvmroot 06:03:
Removal of device c3t0d0, volume group /dev/vg02 was successful
SEE ALSO cpio(1), dd(1), fsck(1M), setboot(1M)vxbootsetup(1M)vxcp_lvmroot(1M)vxres_lvmroot(1M)VxVM 5.0.31.1 24 Mar 2008 vxdestroy_lvmroot(1M)