Storage migration from VMAX to VNXHe Post: 302923501

4 More Discussions You Might Find Interesting

1. Solaris

Veritas Storage Question (Data Migration)

Using Solaris 10 with Veritas Storage Foundation running. I want to copy all contents from DISKA LUN1 to DISKB LUN2. What would be the command syntax to do this?

2. Solaris

Storage Migration on Solaris server

Hi All, I need your help urgently. Below I have given the brief description of the Architecture and the Problem. The brief details of the architecture: We have 5 Containers(Non-Global Zones) running on one T5220 Box. The Global Zone is running Solaris 10. The Non-global Zones are...

3. Solaris

Storage migration: zones and metasets

Hi all, I'm in a situation which i need to understand the best way of doing a migration of storage involved in a zone.Elements involved are solaris 10 (Generic_144488-08), metasets. I need to provision more storage to the said non-global zone and not aware of the "best practices" from the ...

4. AIX

AIX - FC Switch migration, SAN Migration question!

I'm New to AIX / VIOS We're doing a FC switch cutover on an ibm device, connected via SAN. How do I tell if one path to my remote disk is lost? (aix lvm) How do I tell when my link is down on my HBA port? Appreciate your help, very much!

LEARN ABOUT SUSE

sg_emc_trespass

SG_EMC_TRESPASS(8)						     SG3_UTILS							SG_EMC_TRESPASS(8)

NAME

       sg_emc_trespass - Changes ownership of a LUN from another Service-Processor to this one.

SYNOPSIS

       sg_emc_trespass [-d] [-hr] [-s] [-V] DEVICE

DESCRIPTION

       sg_emc_trespass	sends  an EMC-specific Trespass Command to the DEVICE with the selected options. This Mode Select changes the ownership of
       the LUN of the device from another Service-Processor to the one the command was received on.

OPTIONS

       Arguments to long options are mandatory for short options as well.

       -d     outputs some extra debug information associated with executing this command

       -hr    Sets the 'Honor Reservation' bit in the command. If set, the trespass will only succeed to change the ownership from the Peer SP	if
	      the Peer SP does not have an outstanding SCSI reservation for the LUN. By default, the reservation state will be ignored.

       -s     Send the short version of the trespass command instead of the long version. The short version is supported on the EMC FC5300, FC4500
	      and FC4700. The long version (default) is supported on the CLARiiON CX and AX family arrays.

       -V     print out version string then exit.

       In the 2.4 series of Linux kernels the DEVICE must be a SCSI generic (sg) device. In the 2.6 series block devices (e.g. SCSI disks and  DVD
       drives) can also be specified. For example "sg_start 0 /dev/sda" will work in the 2.6 series kernels.

EXIT STATUS

       The exit status of sg_emc_trespass is 0 when it is successful. Otherwise see the sg3_utils(8) man page.

AUTHOR

       Written by Lars Marowsky-Bree, based on sg_start.

REPORTING BUGS

       Report bugs to <dgilbert at interlog dot com>.

COPYRIGHT

       Copyright (C) 2004 Lars Marowsky-Bree, Douglas Gilbert.
       This  software  is distributed under the GPL version 2. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
       POSE.

sg3_utils-1.23							   January 2007 						SG_EMC_TRESPASS(8)