I have a Solaris 7 box. We got a strange error in the syslog, which read as follows:
Nov 15 11:50:16 server-01 unix: NOTICE: free inode /mount1/8025691 had size 0x20d
I consulted with a fellow sysadmin, and he suggested running "fsck -N" on the filesystem in question without unmounting it. So I... (1 Reply)
I have a question and seek help. How many directory can be mounted on one file system on UNIX with solaris 9? For example, I have one file system as /dev/dsk/cieit0a6. I have created one directory as /u01/app/oracle and mounted this directory to cieit06. It works. Then I create another directory as... (4 Replies)
Hello all,
can someone help on how can i check if all file system were mounted during reboot?
I know that we have first to look on /etc/vfstab; the containing of this one should be mounted during boot of system, and after with : df -k we can see if mentioned file system on vfstab were... (3 Replies)
Hi admins,
I'm having some issues with a Solaris 10 machine. I just rebooted the box after at least 2 years running smooth and now the OS is not comming up.
This is what I see in the console (if I press Ctrl^D it loops again):
Root password for system maintenance (control-d to bypass): ... (3 Replies)
Hi All,
I'm facing an issue while trying to unmount a remotely mounted file system, strangely it's not even getting mounted, Kindly find the reply messages.
Mounting error msg
nfsmnthelp: 1831-019 <Server host>: Cannot mount a file system that is already remotely mounted.
mount: 1831-008... (13 Replies)
I need to be able to move data around a disk that has mounted partitions. I am not touching the data on the mounted partition, the MBR or any other disk metadata, only the freespace and unmounted partitions. At the moment I am using libparted but it causes data corruption sometimes although there... (1 Reply)
Dear friends,
I have been facing an issue with one of my red hat unix machine, suddenly lost to switch sudo users. My all colleagues lost to switch to access sudo users.
Then, we have realized its related to NAS issue which does not allowing to write the file. because of this we got so many... (1 Reply)
Discussion started by: Chand
1 Replies
LEARN ABOUT HPUX
df_vxfs
df_vxfs(1M)df_vxfs(1M)NAME
df_vxfs: df - report number of free disk blocks on a VxFS file system
SYNOPSIS
[special|directory]...
DESCRIPTION
prints the number of free blocks and free inodes in VxFS file systems or directories based on the counts kept in the super-blocks.
VxFS dynamically allocates inodes from a pool of free blocks. The number of free inodes and blocks reported by is an estimate based on the
number of free 8K or larger extents and the current ratio of allocated inodes to allocated blocks. (Extents smaller than 8K may not be
usable for all types of allocation, so does not count free blocks in extents smaller than 8K.) Allocating additional blocks may therefore
decrease the count of free inodes and vice versa.
If the operand to is a special device name, the file system can be an unmounted or mounted file system (for example, If you specify a
directoryname, displays information for the file system at that mount point. If neither special nor directory is specified, the free space
on all of the mounted file systems is printed.
Options
recognizes the following options:
Report only the number of kilobytes free.
Report the number of files free.
Report only an actual count of the blocks in the free list
(free inodes are not reported). When this option is specified, reports on raw devices.
Specify the file system type
Report the entire
statvfs(2) structure.
Report the total number of inodes, the number of free inodes, number of used inodes
and the percentage of inodes in use.
Report the allocation in kilobytes.
Report on local file systems only.
Report the file system name. If invoked with no other options this
option prints a list of mounted file system types.
Print the number of free extents of each size.
Free extents are always an integral power of two in length, ranging from a minimum of one block to the maximum extent
size supported by the file system.
Report the total allocated block figures and the number of free blocks.
Report the percentage of blocks used, the number of blocks used and the number
of blocks free. This option cannot be used with other options.
Echo the completed command line, but performs no other action.
The command line is generated by incorporating the user-specified options and other information derived from This
option allows the user to verify the command line.
There are a number of options that specify output formats, some combinations of which are incompatible. If an incompatible combination is
specified, one of the options will override the other(s).
Operands
recognizes the following operands:
directory Name of the mount point from which the VxFS file system is accessed.
special Device name, which contains a mounted or unmounted VxFS file system.
EXAMPLES
Report the number of free disk blocks for all mounted file systems:
Report the number of free extents of each size, for all mounted VxFS file systems:
Report the number of free files for all mounted VxFS file systems:
Report the total allocated block figures and the number of free blocks, for all mounted file systems:
Report the total allocated block figures and the number of free blocks, for the file system mounted as
FILES
File-system devices.
File-system devices.
Static information about the file systems.
mounted-file-system table.
SEE ALSO du(1), df(1M), fsck_vxfs(1M), statvfs(2), fs_vxfs(4), mnttab(4).
STANDARDS CONFORMANCE
: SVID2, XPG2, XPG3
df_vxfs(1M)