I have followed your instructions and compared my map, didn't see faulty results and proceeded.
for vg_usr1 I now have..
Code:
# lsvg vg_usr1
VOLUME GROUP: vg_usr1 VG IDENTIFIER: 000015010000d60000000141138f2577
VG STATE: active PP SIZE: 128 megabyte(s)
VG PERMISSION: read/write TOTAL PPs: 10920 (1397760 megabytes)
MAX LVs: 256 FREE PPs: 1 (128 megabytes)
LVs: 2 USED PPs: 10919 (1397632 megabytes)
OPEN LVs: 2 QUORUM: 11 (Enabled)
TOTAL PVs: 20 VG DESCRIPTORS: 20
STALE PVs: 0 STALE PPs: 0
ACTIVE PVs: 20 AUTO ON: yes
MAX PPs per VG: 32512
MAX PPs per PV: 1016 MAX PVs: 32
LTG size (Dynamic): 256 kilobyte(s) AUTO SYNC: no
HOT SPARE: no BB POLICY: relocatable
PV RESTRICTION: none INFINITE RETRY: no
DISK BLOCK SIZE: 512
Now I believe hdisk42 is a good disk, anyway to test that? How would I go about adding this disk if the above proves true to vg_usr1 to gain space?
Essentially what we did is remove the bad disk because the partitions on it were available on a mirrored disk?
For tests, I was able to mount /usr1 (which is on vg_usr1) and the data is there.
Hello
I've been working on AIX 5.3 ML3 on IBM pSeries520. That server has 6 HDD drives in 3 volume groups (1+mirror in each group). I must check which phisical disk is which disk in the system. For ex. I want to know that disk in 4th slot in the machine is marked as hdisk5 on AIX. Does anybody... (2 Replies)
My root disk is failed and how to replace the root disk in AIX.
Can u give a detailed explanation in step wise.
Pls give the answer taking different scenarios.
Regards
Praveen (1 Reply)
hello
i'm running on P570 box aix 5.3 8 cpus 24G ram
there are 1850 users loged in to this box
the problem is that the two sysytem disks busy all the time
hdisk0 100% busy
hdisk1 100% busy
some one have an idea what writing to this disks?
thanks
ariec (9 Replies)
This may sound like an absolute rookie question, and it is.
I have been working on Migrating our HP and Solaris servers to the new EMC SAN and know the routines backwards.
Now we've suddenly got a new IBM server and I don't even know how to check if it is connected to the switch.
Can someone... (1 Reply)
We run two p5 nodes running AIX 5L in a cluster mode (HACMP), both the nodes share external disk arrays. Only the primary node can access the shared disks at a given point of time.
We are in the process of adding two new disks to the disk arrays so as to make them available to the existing... (3 Replies)
HI, I have had an issue last night while trying to extend a filesystsem . chvg -g <vg> command cameback with an error
0516-1790 chvg: Failed bootinfo -s hdisk9.
Ensure the physical volume is available and try again.
0516-732 chvg: Unable to change volume group u01vg.
the VG has 1... (1 Reply)
Hello
I recently received a request to reclaim hard disks and IP addresses within an AIX system(s). THe file systems are no longer in use and the client has indicated that it is OK to remove them and reclaim the disks and release the IP's. Now, since the file systems belong to a Volume group I... (8 Replies)
Hi everybody,
I have a little problem with my AIX 6.1, PowerHA 6.1 LVM mirror. After problem with SAN pathing of our one Datacenter, I have LV at stale state.
# lsvg cpsdata2vg
VOLUME GROUP: cpsdata2vg VG IDENTIFIER: 00fb518c00004c0000000169445f4c2c
VG STATE: ... (6 Replies)
Hi there,
I had issue with one of MY FC cards on T4-2 servers so system team replace it and start the machine but when launch FORMAT command so I don't see my shared disks coming from storage controller. i have checked at the Fabric switch so WWN numbers are visible and zones are ok and after... (1 Reply)
Discussion started by: janakors
1 Replies
LEARN ABOUT HPUX
vxconfigbackupd
vxconfigbackupd(1M)vxconfigbackupd(1M)NAME
vxconfigbackupd - disk group configuration backup daemon
SYNOPSIS
vxconfigbackupd [-l]
DESCRIPTION
The vxconfigbackupd daemon automatically backs up information about a disk group's new configuration whenever the configuration is changed.
OPTIONS -l Logs backup daemon activities to the file /etc/vx/cbr/bkdaemonLog.
FILES
/sbin/init.d/vxvm-recover
Startup file for vxconfigbackupd.
/etc/vx/cbr/bk/dgname.dgid/dgid.dginfo
Location of backup file for disk group information.
/etc/vx/cbr/bk/dgname.dgid/dgid.diskinfo
Location of backup file for disk attributes.
/etc/vx/cbr/bk/dgname.dgid/dgid.binconfig
Location of backup file for binary configuration copy.
/etc/vx/cbr/bk/dgname.dgid/dgid.cfgrec
Location of backup file for configuration records in vxprint -m format.
NOTES
The vxconfigbackup command can be used to back up a disk group's configuration manually at any desired time.
The disk group configuration backup and restore utilities do not save any data in the public region. This includes file system or other
application data that is configured within VxVM objects.
When a disk group is destroyed, its configuration backup information (including the backup directory) is also removed. The only exception
to this behavior is when the disk group is in the precommit state of restoration.
The backup directory should be large enough to accommodate copies of all the currently imported disk groups. The minimum recommended size
of the backup directory is P * (N + 1) megabytes, where P is the private region in megabytes (by default, 32MB), and N is the number of
disk groups. The additional P megabytes is required to hold a temporary copy of the disk group configuration when a disk group is imported
or a configuration change is made.
The default backup directory is /etc/vx/cbr/bk. The location of the backup directory can be configured by using the vxconfigbackup -l
backup_directory_path command.
SEE ALSO vxconfigbackup(1M), vxconfigrestore(1M)VxVM 5.0.31.1 24 Mar 2008 vxconfigbackupd(1M)
10-27-2014
